Ingco GCS5451811 18-tommer benzindrevet træsav (46CC) brugermanual

1. Vigtige sikkerhedsinstruktioner

Read and understand all safety warnings and instructions before operating this petrol tree saw. Failure to follow the warnings and instructions may result in serious injury.

1.1 Generel sikkerhed

• Personligt beskyttelsesudstyr (PPE): Brug altid passende personlige værnemidler, herunder sikkerhedsbriller, høreværn, handsker og robust fodtøj.
• Arbejdsområde: Hold arbejdsområdet rent og godt oplyst. Rodede eller mørke områder inviterer til ulykker.
• Børn og tilskuere: Hold børn og omkringstående væk, mens du betjener et elværktøj. Distraktioner kan få dig til at miste kontrollen.
• Brændstofhåndtering: Handle fuel in a well-ventilated area, away from sparks or open flames. Do not smoke while refueling.

1.2 Specifik sikkerhed for motorsav

• Spark tilbage: Vær opmærksom på tilbageslag. Tilbageslag kan forekomme, når spidsen eller spidsen af ​​sværdet rører en genstand, eller når træet lukker sig om og klemmer savkæden i snittet.
• Korrekt greb: Always hold the chainsaw firmly with both hands, with thumbs and fingers encircling the chainsaw handles.
• Stabilt fodfæste: Sørg for stabilt fodfæste og balance før og under savning.
• Opretholdelse: Regularly inspect and maintain the chainsaw according to the maintenance schedule. A dull chain can increase the risk of kickback.

2. Komponenter overview

Familiarize yourself with the main components of your Ingco GCS5451811 Petrol Tree Saw.

Figure 1: Ingco GCS5451811 18-inch Petrol Tree Saw. This image displays the complete chainsaw, highlighting its yellow body, black handles, and the 18-inch guide bar with the saw chain. The Ingco logo is visible on the side of the main body and on the guide bar.

1. Motorhus: Contains the 46CC petrol engine.
2. Forreste håndtag: For stabil tohåndsbetjening.
3. Bagerste håndtag: Includes throttle trigger and safety lock.
4. Kædebremse: Sikkerhedsmekanisme til hurtigt at stoppe kæden.
5. Guide Bar: The metal bar that supports and guides the saw chain. This model features an 18-inch guide bar.
6. Savkæde: The cutting component that rotates around the guide bar.
7. Brændstoftankdæksel: For filling with petrol.
8. Olietankdæksel: For filling with chain lubricant oil.

3. Opsætning og montering

Before first use, ensure the saw is correctly assembled and prepared.

3.1 Brændstof- og olieblanding

This petrol saw requires a specific fuel mixture. Consult the engine manufacturer's recommendations for the correct petrol-to-oil ratio (typically 2-stroke engine oil mixed with unleaded petrol).

1. Mix the recommended 2-stroke engine oil with unleaded petrol in a separate, approved fuel container.
2. Carefully pour the mixed fuel into the fuel tank (marked with a fuel pump icon). Do not overfill.
3. Fill the chain oil tank (marked with an oil can icon) with appropriate chain lubricant oil. This lubricates the chain and guide bar during operation.
4. Securely close both fuel and oil caps.

3.2 Chain and Guide Bar Installation (if not pre-assembled)

1. Sørg for, at motoren er slukket, og at kædebremsen er aktiveret.
2. Fjern møtrikkerne på kædedækslet og kædedækslet.
3. Placer sværdet på tappene.
4. Carefully fit the saw chain around the sprocket and into the guide bar groove, ensuring the cutting edges face forward in the direction of rotation.
5. Sæt kædedækslet på igen, og spænd møtrikkerne løst.
6. Adjust chain tension: The chain should be snug against the guide bar but still able to be pulled freely by hand. There should be no slack on the underside of the guide bar.
7. Når spændingen er korrekt, spænd kædedækslets møtrikker helt.

4. Betjeningsvejledning

4.1 Start af motoren

1. Placer motorsaven på en fast, flad overflade.
2. Aktiver kædebremsen.
3. Set the choke lever to the "closed" or "start" position.
4. Tryk flere gange på primerpumpen, indtil brændstoffet er synligt.
5. Træk fast og støt i startsnoren, indtil motoren starter (normalt et par træk).
6. Once the engine fires, immediately move the choke lever to the "open" or "run" position.
7. Træk i startsnoren igen, indtil motoren starter og kører jævnt.
8. Lad motoren varme op i et par øjeblikke, før du deaktiverer kædebremsen og begynder arbejdet.

4.2 Skæreteknikker

Always maintain a firm grip with both hands. Ensure the chain is rotating at full speed before making contact with the wood.

• Fældning: For felling trees, plan your escape route and cutting direction carefully. Make a notch cut on the side of the desired fall, then a felling cut from the opposite side.
• Afgrening: When limbing, work from the bottom of the tree upwards, removing smaller branches first. Be aware of branches under tension.
• Bucking: When cutting a log into sections (bucking), support the log to prevent pinching the chain. Cut from the top down or bottom up depending on the log's support.

4.3 Standsning af motoren

To stop the engine, move the ignition switch to the "OFF" position.

5. Vedligeholdelse

Regelmæssig vedligeholdelse sikrer optimal ydeevne og forlænger levetiden på din motorsav.

5.1 Daily Maintenance (Before Each Use)

• Kontroller kædespændingen.
• Undersøg kæden for skarphed og skader. Slib eller udskift den efter behov.
• Check chain oil level and fuel level.
• Kontroller kædebremsen for korrekt funktion.
• Clean debris from the air filter and cooling fins.

5.2 Ugentlig vedligeholdelse

• Rengør sværdsporet og oliehullerne.
• Rotate the guide bar to ensure even wear.
• Check spark plug condition and gap. Clean or replace if necessary.
• Rengør luftfilteret grundigt.

5.3 Opbevaring

When storing the chainsaw for an extended period:

• Drain all fuel from the tank and run the engine until it stops to clear the carburetor.
• Drain chain oil.
• Clean the entire saw.
• Remove the chain and guide bar, clean them, and apply a light coat of oil to prevent rust.
• Store in a dry, well-ventilated area, out of reach of children.

6. Fejlfinding

For issues not listed or if solutions do not resolve the problem, contact an authorized Ingco service center.

7. Tekniske specifikationer

• Model: GCS5451811
• Motorvolumen: 46 CC
• Styrestangslængde: 18 tommer
• Strømkilde: Benzin
• Hestekræfter: 3 HK
• Varens vægt: Cirka 1 kg
• Produktdimensioner: 10 x 20 x 37 cm
• Fabrikant: ENGCO (Ingco)

8. Garanti og support

Specific warranty details for the Ingco GCS5451811 Petrol Tree Saw are typically provided with the product packaging or can be obtained from your authorized dealer or the official Ingco webwebsted. Gem venligst din købsbevis til garantikrav.

For technical support, spare parts, or service, please contact your local Ingco service center or the retailer from whom the product was purchased.