Korona 60010 Socket Heater User Manual

1. Vigtige sikkerhedsinstruktioner

Please read all instructions carefully before using the Korona 60010 Socket Heater. Retain this manual for future reference.

• Elektrisk sikkerhed: Ensure the heater is plugged into a properly grounded 220-240V outlet. Do not overload electrical circuits.
• Placering: Do not place the heater near water, in bathrooms, or in areas with high humidity. Maintain a safe distance from flammable materials such as curtains, furniture, and bedding.
• Ventilation: Do not block the air inlets or outlets of the heater. Ensure adequate airflow around the device.
• Overvågning: Do not leave the heater unattended while in operation. Keep out of reach of children and pets.
• Overophedningsbeskyttelse: The heater is equipped with an automatic overheat protection system. If it overheats, it will shut off automatically. Unplug the device and allow it to cool before restarting.
• Opretholdelse: Unplug the heater before cleaning or performing any maintenance.
• Skade: Do not operate the heater if the plug or casing is damaged. Contact qualified service personnel for repairs.
• Forlængerledninger: Avoid using extension cords. If an extension cord is necessary, ensure it is rated for the heater's power consumption (600W).

2. Produktet er slutview

The Korona 60010 Socket Heater is a compact and efficient heating solution designed for small rooms up to 20 m². It features a digital display, adjustable temperature settings, a timer function, and frost control for optimal comfort and safety.

Figur 1: Forside view of the Korona 60010 Socket Heater, showing the digital display and control buttons.

Nøglefunktioner:

• Digital LED-skærm: Provides clear temperature and timer information.
• Justerbar temperatur: Set desired temperature between 6°C and 32°C.
• Frost Control Function: Automatically activates the heater if the room temperature drops below the set point, preventing freezing.
• Timer funktion: Programmér varmelegemet til at køre i en bestemt periode.
• To ventilatorhastigheder: Choose between high and low fan settings.
• Overophedningsbeskyttelse: Built-in safety mechanism for automatic shutdown.
• Kompakt design: Plugs directly into a wall socket, saving space.

Figur 2: Detaljeret view of the digital LED display and control buttons for temperature and timer settings.

3. Opsætning

Setting up your Korona 60010 Socket Heater is quick and easy.

1. Pakker ud: Tag forsigtigt varmelegemet ud af emballagen.
2. Inspicere: Kontrollér enheden for tegn på skade. Må ikke anvendes, hvis den er beskadiget.
3. Tilslut: Insert the heater directly into a standard 220-240V wall socket. Ensure it is firmly seated. The heater is designed to be compact and stable when plugged in.

Figur 3: Bagside view of the heater, illustrating its compact design and direct plug-in capability.

Figure 4: The heater in operation, plugged directly into a wall socket, ideal for small spaces.

4. Betjeningsvejledning

Follow these steps to operate your Korona 60010 Socket Heater.

4.1 Tænd/sluk

• For at tænde: Flip the power switch located on the side of the unit to the 'ON' (I) position. The digital display will illuminate.
• For at slukke: Flip the power switch to the 'OFF' (O) position.

4.2 Temperaturjustering

• Once powered on, the display will show the current temperature or the last set temperature.
• Brug '+' og '-' buttons on the control panel to adjust the desired temperature.
• Temperaturen kan indstilles mellem 6°C og 32°C.
• Varmeapparatet tænder eller slukker automatisk for at opretholde den indstillede temperatur.

4.3 Indstillinger for ventilatorhastighed

• Tryk på Fan Speed ​​knap (often indicated by a fan icon) to cycle between the two available fan speeds (High and Low).
• The display may indicate the current fan speed setting.

4.4 Timer funktion

• Tryk på Timer knap (often indicated by a clock icon) to activate the timer function.
• Brug '+' og '-' buttons to set the desired operating time in hours (e.g., 1-12 hours).
• Varmeapparatet slukker automatisk, når den indstillede tid er udløbet.

4.5 Frost Control Function

• The frost control function is automatically active when the heater is plugged in and the power switch is ON.
• If the ambient temperature drops below the set temperature, the heater will automatically activate to prevent the room from becoming too cold, protecting against frost.
• This feature is particularly useful for garages, basements, or rarely used rooms to prevent water pipes from freezing.

5. Vedligeholdelse

Regelmæssig vedligeholdelse sikrer optimal ydeevne og levetid for din varmeovn.

• Rensning: Before cleaning, always unplug the heater from the wall socket and allow it to cool completely.
• Tør de udvendige overflader af med en blød, damp klæde. Brug ikke slibende rengøringsmidler eller opløsningsmidler.
• Nedsænk ikke varmeren i vand eller anden væske.
• Periodically clean the air inlets and outlets with a soft brush or vacuum cleaner attachment to remove dust and debris.
• Opbevaring: When not in use, store the heater in a cool, dry place, away from direct sunlight and moisture.

6. Fejlfinding

If you encounter issues with your Korona 60010 Socket Heater, refer to the following common problems and solutions:

7. Specifikationer

Technical specifications for the Korona 60010 Socket Heater.

Figure 5: Dimensions of the Korona 60010 Socket Heater.

8. Garanti og support

Korona products are manufactured to high-quality standards. For warranty information, technical support, or service inquiries, please contact Korona customer service or visit their official webwebsted.

Fabrikant Webwebsted: www.korona-electric.de

UPC: 4053035600109