Indledning
The Varmilo VPE87 TKL mechanical keyboard is designed for versatility and a premium typing experience. It features triple-mode connectivity (wired, Bluetooth, and 2.4 GHz wireless), hotswap sockets for switch customization, and a white LED backlight. This manual provides detailed instructions for setup, operation, maintenance, and troubleshooting to ensure optimal use of your keyboard.
Pakkens indhold
- Varmilo VPE87 Mechanical Keyboard
- USB-C kabel
- 2.4 GHz Wireless Receiver (typically stored in keyboard)
- Tasteaftrækker (kan være inkluderet)
- Afbryder (kan være inkluderet)
Opsætning
Before using your Varmilo VPE87 keyboard, please follow these steps to set it up.
1. Physical Connection and Initial Charge
Image: USB-C port and 3-way cord channel. The USB-C port is located on the back of the keyboard, designed to allow the cable to exit from the left, right, or center for tidy cable management.
- Tilslut det medfølgende USB-C-kabel til tastaturets USB-C-port.
- Connect the other end of the USB-C cable to an available USB port on your computer or a USB power adapter.
- For wireless use, ensure the keyboard is sufficiently charged. The white LED backlight will indicate charging status (specific indicator behavior may vary, refer to LED section).
2. Justering af tastaturvinkel
Billede: Side profile with kickstand extended. The keyboard features a 2-step kickstand on the underside, allowing users to adjust the typing angle for ergonomic comfort.
The VPE87 features a 2-step kickstand on its underside. Gently flip out the kickstands to adjust the keyboard's angle to your preferred typing position.
Betjeningsvejledning
Tilslutningstilstande
The Varmilo VPE87 supports three connectivity modes: Wired, Bluetooth, and 2.4 GHz Wireless. You can switch between modes using the dedicated switch or key combinations, typically located on the back or side of the keyboard.
Kablet tilstand
- Tilslut USB-C-kablet fra tastaturet til din computer.
- Tastaturet vil automatisk blive genkendt af dit operativsystem.
- This mode also charges the keyboard's internal battery.
Bluetooth-tilstand
- Ensure the keyboard is in Bluetooth mode (check the switch on the back/side).
- Aktiver Bluetooth på din enhed (computer, tablet, smartphone) og søg efter nye enheder.
- Select "Varmilo VPE87" (or similar name) from the list of available devices.
- Follow any on-screen prompts to complete pairing. The keyboard may support multiple Bluetooth profiles (e.g., Fn + 1, 2, 3 for different devices). Refer to specific key combinations for your model.
2.4 GHz trådløs tilstand
- Locate the 2.4 GHz USB receiver (often stored in a compartment on the keyboard's underside).
- Sæt USB-modtageren i en ledig USB-port på din computer.
- Ensure the keyboard is in 2.4 GHz wireless mode (check the switch on the back/side).
- Tastaturet skal automatisk oprette forbindelse til modtageren.
Baggrundslys kontrol
Image: Keyboard with white LED backlight. The white LED backlight enhances visibility of the keycaps, especially in low-light conditions.
The VPE87 features a white LED backlight. Use the following key combinations to control the backlight:
- Fn + Arrow Up: Øg baggrundsbelysningens lysstyrke.
- Fn + Arrow Down: Decrease backlight brightness / Turn off backlight.
- Fn + Other Keys: (Specific to model) May control backlight effects or modes. Refer to the keyboard's keycap legends for additional functions.
Hotswap Sockets (Switch Customization)
Billede: Top view of the Varmilo VPE87 keyboard. This image displays the keyboard's layout and the artistic design on its keycaps and case, highlighting its aesthetic appeal.
The VPE87 is equipped with hotswap sockets, allowing you to change mechanical switches without soldering. This enables customization of your typing feel.
- Fjern tastehætte: Brug en tastaftrækker til forsigtigt at fjerne den ønskede tast.
- Fjern kontakt: Brug en afbrydertrækker til forsigtigt at gribe fat i de øverste og nederste klips på afbryderen og trække den lige op.
- Indsæt ny kontakt: Align the pins of the new switch with the holes in the hotswap socket. Gently push the switch straight down until it clicks into place. Ensure pins are not bent.
- Udskift tastehætte: Sæt tastaturet tilbage på den nye switch.
Note: Ensure the keyboard is disconnected or powered off before swapping switches. Use compatible 3-pin or 5-pin mechanical switches.
Andre funktioner
- Double-layer Silicone Sound Absorption: This design minimizes typing noise for a quieter experience.
- 3-Way Cord Channel: The USB-C cable can be routed from the left, right, or center of the keyboard's underside for neat cable management.
Opretholdelse
Proper maintenance ensures the longevity and performance of your Varmilo VPE87 keyboard.
- Rengøring af taster:
- Use a keycap puller to remove keycaps.
- Tør tastehætter af med annonceamp cloth and mild soap solution. Avoid harsh chemicals.
- Ensure keycaps are completely dry before reattaching.
- Rengøring af tastaturhuset:
- Brug en blød, tør klud til at tørre tastaturets overflade af.
- Brug trykluft til støv og snavs mellem tasterne.
- Opbevaring: Opbevar tastaturet et køligt, tørt sted væk fra direkte sollys og ekstreme temperaturer.
- Væskespild: In case of a liquid spill, immediately disconnect the keyboard, turn it upside down to drain, and allow it to dry completely for at least 24-48 hours before attempting to use it again. Do not use a hairdryer or heat gun.
Fejlfinding
If you encounter issues with your Varmilo VPE87 keyboard, try the following solutions:
| Problem | Løsning |
|---|---|
| Keyboard not responding in Wired Mode. |
|
| Kan ikke oprette forbindelse via Bluetooth. |
|
| 2.4 GHz wireless connection is unstable or not working. |
|
| Baggrundsbelysningen virker ikke eller er svag. |
|
| A specific key is not registering. |
|
Specifikationer
| Feature | Detalje |
|---|---|
| Mærke | Varmilo |
| Model | VPE87 |
| Tastaturbeskrivelse | Mekanisk |
| Forbindelsesteknologi | Bluetooth, USB-C (Wired), 2.4 GHz Wireless |
| Antal nøgler | 87 |
| Baggrundsbelysning | White LED (Single Color) |
| Særlige funktioner | Backlit, Wireless connectivity, Hotswap Sockets, 2-step Kickstand, Double-layer Silicone Sound Absorption, 3-way Cord Channel |
| Kompatible enheder | Bærbar computer, pc, smartphone, tablet |
| Color (Switches) | Kailh Prestige Clicky (as per product listing) |
Garanti og support
Varmilo products are designed for quality and durability. For specific warranty information, please refer to the warranty card included with your product or visit the official Varmilo webwebsted.
For technical support, troubleshooting assistance beyond this manual, or warranty claims, please contact Varmilo customer service through their official channels. You can often find support contact information on the brand's official webhjemmeside eller gennem den forhandler, hvor du købte produktet.
Visit the official Varmilo Store for more information: Varmilo Store on Amazon
