1. Introduktion
The PAC LPHCH42 Integration T-Harness is designed to simplify the installation of aftermarket audio components in select 2021 non-amplified Chrysler vehicles equipped with the UConnect 5 system. This T-harness provides a plug-and-play solution, allowing for the addition of an amplifier or other audio accessories without cutting or splicing into the factory wiring. It ensures a clean and reversible installation, preserving the integrity of the vehicle's original electrical system.
2. Sikkerhedsoplysninger
- Frakobl altid køretøjets batteri, inden du påbegynder elektrisk installation, for at forhindre kortslutninger og skader.
- Sørg for, at alle forbindelser er sikre og korrekt isolerede for at undgå elektriske farer.
- Consult a professional automotive audio installer if you are unsure about any part of the installation process.
- Do not modify the T-harness or any vehicle wiring unless explicitly instructed.
- Verify vehicle compatibility before installation. This harness is specifically for 2021 non-amplified Chrysler vehicles with UConnect 5.
3. Pakkens indhold
Verify that all items are present before proceeding with the installation:
- PAC LPHCH42 Integration T-Harness
- Impedance Converter (integrated)
- Installationsvejledning (dette dokument)
4. Opsætning og installation
The PAC LPHCH42 T-Harness is designed for straightforward plug-and-play installation. Follow these steps carefully:
- Klargør køretøjet: Ensure the vehicle is turned off and the negative terminal of the battery is disconnected.
- Adgang til fabriksradioen: Carefully remove the trim panels and fasteners necessary to gain access to the back of the factory radio unit. Refer to your vehicle's service manual for specific instructions on radio removal.
- Frakobl fabriksledningsnettet: Locate the main wiring harness connected to the back of the factory radio. Disconnect this harness.
- Connect the T-Harness: Connect the male end of the PAC LPHCH42 T-Harness to the factory radio. Connect the female end of the PAC LPHCH42 T-Harness to the vehicle's factory wiring harness that was just disconnected from the radio. The T-harness will now be inline with the factory radio wiring.
- Connect Aftermarket Components: The T-harness provides RCA outputs from the integrated impedance converter for connecting to an aftermarket amplifier. Connect your amplifier's input cables to these RCA outputs. Ensure proper left/right channel connections.
- Sikker ledningsføring: Route and secure all wiring to prevent pinching or interference with moving parts.
- Gentilslut batteri: Tilslut køretøjets negative batteripol igen.
- Test system: Turn on the vehicle and test the functionality of the factory radio and any newly installed aftermarket audio components. Adjust amplifier gain settings as needed.
Billede 1: The PAC LPHCH42 Integration T-Harness, featuring two green multi-pin connectors and an integrated clear impedance converter module. This harness facilitates connecting aftermarket audio equipment to a factory radio without cutting wires.
Video 1: This video demonstrates the plug-and-play functionality of a car radio system adapter harness, similar to the LPHCH42. It shows how the adapter connects inline with the factory wiring, providing RCA outputs for additional audio components like an amplifier, without requiring wire cutting or splicing.
5. Betjeningsvejledning
Once installed, the PAC LPHCH42 T-Harness operates passively, providing a low-level audio signal from the factory radio to your aftermarket amplifier via the RCA outputs. The integrated impedance converter ensures proper signal matching for optimal audio quality.
- Lydsignal: The harness taps into the speaker-level outputs of the factory radio and converts them to a low-level RCA signal.
- Amplifier kontrol: Your aftermarket amplifier will receive its audio input from the RCA connections provided by the T-harness. Power and remote turn-on for the amplifier must be wired separately according to the amplifier's instructions.
- Lydstyrkekontrol: The factory radio's volume control will continue to adjust the overall system volume, including the ampforstærket signal.
6. Specifikationer
| Feature | Specifikation |
|---|---|
| Model | LPHCH42 |
| Kompatibilitet | 2021 Non-Amplified Chrysler with UConnect 5 |
| Materiale | Kobberledninger |
| Varens vægt | 0.35 pund (ca. 5.6 ounces) |
| Connector Type | 12-benet |
| Pakkedimensioner | 8.5 x 8.25 x 1 tommer |
7. Fejlfinding
- Ingen lydoutput:
- Check all connections to ensure they are secure and fully seated.
- Bekræft amplifier is powered on and receiving a remote turn-on signal.
- Bekræft amplifier's gain settings are not set too low.
- Ensure the factory radio is functioning correctly.
- Forvrænget lyd:
- Juster amplifier's gain settings to prevent clipping.
- Check for proper grounding of the amplivligere.
- Sørg for, at ingen ledninger er klemt eller beskadiget.
- Intermitterende lyd:
- Inspect all connections for looseness or corrosion.
- Verify the vehicle's battery connections are secure.
8. Vedligeholdelse
The PAC LPHCH42 T-Harness requires minimal maintenance. Periodically inspect all connections to ensure they remain secure and free from corrosion. Keep the harness free from excessive moisture and extreme temperatures to ensure long-term reliability.
9. Garanti og support
For specific warranty information and technical support regarding your PAC LPHCH42 Integration T-Harness, please refer to the manufacturer's official webwebstedet eller kontakt deres kundeserviceafdeling. Gem din købsbevis til garantikrav.
