Wildgame Innovations WGI-KICK2-2PK

Wildgame Innovations Kicker 18MP Trail Camera User Manual

Model: WGI-KICK2-2PK

Indledning

This manual provides comprehensive instructions for the setup, operation, and maintenance of your Wildgame Innovations Kicker 18MP Trail Camera. Please read this manual thoroughly before using your device to ensure proper functionality and longevity.

Pakkens indhold

The Wildgame Innovations Kicker 18MP 2-Pack includes:

Note: Batteries and SD cards are not included and must be purchased separately.

Two Wildgame Innovations Kicker 18MP Trail Cameras, with AA batteries and 16GB SD cards displayed alongside them.

Image: Two Wildgame Innovations Kicker 18MP Trail Cameras. The image also shows AA batteries and 16GB SD cards, which are for illustrative purposes only and are not included with the product.

Opsætning

1. Batteriinstallation

The Kicker 18MP Trail Camera requires 8 "AA" batteries (not included) for operation. For optimal performance, use high-quality alkaline or lithium batteries.

  1. Find batterirummet på kameraet.
  2. Åbn kammerdøren.
  3. Isæt 8 "AA"-batterier, og sørg for at polerne (+/-) vender korrekt som angivet inde i batterirummet.
  4. Luk batteridækslet ordentligt for at bevare kameraets vejrbestandighed.

2. Installation af SD-kort

A Class 4 or higher SD card (up to 32GB, not included) is required to store images and videos.

  1. With the camera powered off, locate the SD card slot.
  2. Insert the SD card into the slot with the label facing up until it clicks into place.
  3. To remove, gently push the SD card in until it clicks, then release, and it will eject.

3. Montering af kameraet

The camera is designed for outdoor use and features a tree mount for secure placement.

  1. Select a suitable location, such as a tree or post, that provides a clear view af det ønskede område.
  2. Use the included mounting strap or a compatible cable lock (not included) to secure the camera.
  3. Ensure the camera is stable and pointed correctly. Adjust the angle as needed.

Betjeningsvejledning

1. Tænd/sluk

To power on the camera, locate the power switch and slide it to the "ON" position. To power off, slide the switch to "OFF".

2. Grundlæggende indstillinger

Access the camera's menu to configure settings such as:

Refer to the on-screen menu for detailed navigation and adjustment of these parameters.

3. Optagelse af billeder og videoer

Once powered on and configured, the camera will automatically capture images or videos when motion is detected within its 60-foot detection range. The 0.7-second trigger speed ensures quick capture of activity.

4. Forbindelse

The camera features Wi-Fi connectivity for smartphone compatibility. Consult the camera's display or a dedicated mobile application (if available) for instructions on connecting your smartphone to the camera for media transfer or remote control.

Opretholdelse

1. Udskiftning af batteri

When the battery indicator shows low power, replace all 8 "AA" batteries simultaneously. Do not mix old and new batteries or different battery types.

2. SD-kortstyring

Regularly check the SD card for available storage space. Format the SD card periodically to maintain optimal performance and prevent data corruption. Always back up important files før formatering.

3. Rensning

Use a soft, dry cloth to clean the camera lens and housing. Avoid abrasive cleaners or solvents. Ensure the camera is dry before closing any compartments.

4. Miljøhensyn

The camera is designed for outdoor use with an IP65 international protection rating, indicating resistance to dust and low-pressure water jets. However, avoid submerging the camera in water or exposing it to extreme weather conditions for prolonged periods.

Fejlfinding

ProblemMulig årsagLøsning
Kameraet tænder ikke.
  • Batterierne er døde eller forkert installeret.
  • Power switch is not in the "ON" position.
  • Udskift batterierne med nye, og sørg for korrekt polaritet.
  • Verify the power switch is set to "ON".
No images/videos are captured.
  • SD-kortet er fuldt eller ikke isat korrekt.
  • Problemer med detektionsrækkevidde.
  • Forkerte indstillinger.
  • Insert a formatted SD card or clear existing data.
  • Ensure camera is positioned within 60ft of target area.
  • Check camera settings for proper mode (photo/video) and trigger sensitivity.
Dårlig billed-/videokvalitet.
  • Beskidt linse.
  • Forhold med lavt lys.
  • Camera movement.
  • Rengør kameralinsen med en blød klud.
  • Ensure adequate lighting or adjust camera placement.
  • Monter kameraet sikkert for at forhindre bevægelse.

Specifikationer

Garanti og support

For warranty information, technical support, or service inquiries, please refer to the official Wildgame Innovations webwebstedet eller kontakt deres kundeserviceafdeling direkte. Gem din købskvittering til garantikrav.

Wildgame Innovations Official Webwebsted: www.wildgameinnovations.com

Relaterede dokumenter - WGI-KICK2-2PK

Preview Wildgame Innovations KICK2 Scouting Camera User Manual
Comprehensive user manual for the Wildgame Innovations KICK2 scouting camera, covering battery and SD card installation, power, modes, settings, mounting, image retrieval, formatting, warranty, and regulatory information.
Preview Wildgame Innovations Encounter 2.0 mobilt trailkamera opsætnings- og betjeningsvejledning
En omfattende guide til opsætning, betjening og montering af Wildgame Innovations Encounter 2.0 Cellular Trail Camera, inklusive app-integration, konfiguration af indstillinger og fejlfinding.
Preview Wildgame Innovations W6E infrarødt digitalt spejderkamera brugermanual
Denne brugermanual indeholder omfattende instruktioner til Wildgame Innovations W6E infrarødt digitalt spejderkamera, der dækker opsætning, funktioner, betjening og vedligeholdelse for effektiv overvågning af dyreliv.
Preview Wildgame Innovations Terra Extreme User Manual - Setup and Operation
Comprehensive user manual for the Wildgame Innovations Terra Extreme Digital Game Scouting Camera (Model WGI-TERAX). Covers battery and SD card installation, power settings, quick sets, date/time configuration, custom photo and video settings, camera modes, mounting, image retrieval, SD card formatting, warranty information, and regulatory compliance.
Preview Wildgame Innovations SPARK™ Spejderkamera Brugermanual
Brugermanual til Wildgame Innovations SPARK™-rekordkameraet, der dækker batteriinstallation, opsætning af SD-kort, indstillinger for tidszone og dato, forsinkelses- og strømtilstande, synkronisering af atomur, billedhentning, montering, formatering af SD-kort og garantioplysninger.
Preview Wildgame Innovations Mirage User's Manual
This user's manual guides you through the setup and operation of the Wildgame Innovations Mirage trail camera. Learn about battery installation, SD card usage, mode settings, motion sensitivity, exposure, resolution, and image retrieval. Includes warranty information and FCC compliance details.