Fermax Sup Milo digitalt intercom-system brugermanual

Indledning

This manual provides essential instructions for the installation, operation, and maintenance of your Fermax Sup Milo Digital Intercom System. Please read this manual thoroughly before installation and use to ensure proper function and safety. Keep this manual for future reference.

The Fermax Sup Milo Digital Intercom System is designed to provide clear communication and enhanced security for residential and commercial premises. It integrates advanced technology with a robust design to offer reliable access control and communication solutions.

Sikkerhedsoplysninger

Always follow basic safety precautions to reduce the risk of fire, electric shock, and injury to persons. This product should only be installed and serviced by qualified personnel.

• Afbryd strømmen før installation eller servicering.
• Udsæt ikke enheden for regn eller fugt.
• Sørg for, at alle ledningsforbindelser er sikre og overholder lokale el-forskrifter.
• Forsøg ikke at reparere enheden selv. Overlad al service til kvalificeret servicepersonale.

Pakkens indhold

Bekræft at alle komponenter er til stede, før installationen påbegyndes. Pakken indeholder typisk:

• Fermax Sup Milo Digital Intercom Unit (Aluminum Plate)
• Monteringsudstyr
• Connection cables (may vary by kit)
• Brugervejledning (dette dokument)

Note: Specific components may vary based on the purchased kit.

Opsætning og installation

This section outlines the general steps for installing the Fermax Sup Milo Digital Intercom System. Professional installation is recommended.

1. Forberedelse af stedet

• Choose a suitable mounting location, typically near an entrance, at an accessible height.
• Sørg for, at overfladen er flad og stabil.
• Verify access to necessary power and communication wiring.

2. Montering af enheden

1. Carefully remove the front panel of the intercom unit to access mounting holes.
2. Position the unit and mark the drilling points on the wall.
3. Bor huller og isæt passende vægankre om nødvendigt.
4. Secure the intercom unit to the wall using the provided mounting screws.

3. Ledningsforbindelser

Refer to the wiring diagram specific to your system configuration. General connections include:

• Strømforsyning: Connect to a stable 100V power source. Ensure correct polarity.
• Kommunikationsbus: Connect the digital bus lines to the indoor units and central control unit.
• Døråbner: Connect the door release mechanism (e.g., electric strike) to the designated terminals.
• Hjælpeindgange/udgange: Connect any additional devices such as external cameras or sensors as required.

Billede 1: Forside view of the Fermax Sup Milo Digital Intercom System, showing the aluminum plate and digital keypad. This image illustrates the exterior design of the main unit.

4. Første opstart og konfiguration

1. Once all wiring is complete and secure, restore power to the system.
2. The unit will perform a self-test. Observe any indicator lights or sounds.
3. Follow the system's programming guide (usually provided separately or accessible via a master unit) to configure apartment numbers, access codes, and other settings.

Betjeningsvejledning

Making a Call from the Outdoor Panel

1. To call an apartment: Enter the apartment number using the digital keypad.
2. Press the "Call" button (often represented by a bell icon or similar).
3. The indoor unit will ring. Once answered, communication can begin.

Receiving a Call and Opening the Door (Indoor Unit)

1. When the indoor unit rings, press the "Answer" button to establish communication with the visitor.
2. To open the door, press the "Door Release" button on your indoor unit.
3. Døren vil låse op i en kort periode.

Using Access Codes

If configured, authorized users can enter a pre-programmed access code on the outdoor digital keypad to unlock the door without needing to call an indoor unit.

1. Enter your personal access code using the digital keypad.
2. Press the "Enter" or "Door Release" button.
3. Døren vil låse op.

Opretholdelse

Regular maintenance ensures the longevity and optimal performance of your Fermax intercom system.

Rensning

• Rengør ydersiden af ​​enheden med en blød, damp klæde.
• Brug ikke slibende rengøringsmidler, opløsningsmidler eller kemiske spraymidler, da disse kan beskadige overfladen og de elektroniske komponenter.
• Sørg for, at der ikke kommer væske ind i enhedens åbninger.

Inspektioner

• Periodically check for any visible damage to the unit or wiring.
• Sørg for, at alle monteringsskruer er stramme.
• Test the communication and door release functions regularly.

Softwareopdateringer

If applicable, consult your installer or Fermax support for information on firmware updates that may improve performance or add new features.

Fejlfinding

Dette afsnit omhandler almindelige problemer, du kan støde på. Kontakt teknisk support ved mere komplekse problemer.

Specifikationer

Technical specifications for the Fermax Sup Milo Digital Intercom System (Model: 8424299951713).

• Model: Fermax Sup Milo Digital Intercom System
• Varenummer: 8424299951713
• Fabrikant: Fermax
• Dimensioner (pakke): Cirka 0.1 x 0.1 x 0.1 cm
• Weight (Unit): 108 gram
• Materiale: Metal, Plastic, Polycarbonate (Aluminum Plate)
• Strømkilde: External Power Supply (100V)
• Voltage: 100V
• Wattage: 100W
• Batterier påkrævet: Ingen
• Farve: Multicolored (referring to internal components or subtle design elements, main plate is aluminum)

Garantioplysninger

Fermax products are manufactured to high-quality standards. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Fermax webwebsted. Gem din købsbevis til garantikrav.

Typically, warranty covers manufacturing defects for a specified period from the date of purchase. Damage due to improper installation, misuse, or unauthorized repairs is generally not covered.

Kundesupport

If you require technical assistance, have questions about your product, or need to report a problem, please contact your local Fermax distributor or visit the official Fermax webwebsted for supportressourcer.

Webwebsted: www.fermax.com

Hav venligst dit modelnummer (8424299951713) og købsoplysninger klar, når du kontakter support.