Produkt overview
The Einhell TC-BD 630/1 drill press is a precision tool designed for various drilling tasks in wood and metal. It features a robust construction and adjustable settings to accommodate different materials and drilling requirements. This manual provides essential information for safe operation, setup, maintenance, and troubleshooting.
Figur 1: Forside view of the Einhell TC-BD 630/1 Drill Press, showcasing its red and black housing, the drill chuck, and the adjustable work table.
Sikkerhedsinstruktioner
Overhold altid følgende sikkerhedsforanstaltninger for at forhindre personskade og beskadigelse af værktøjet.
- Read and understand all instructions before operating the drill press.
- Brug passende personlige værnemidler (PPE), herunder sikkerhedsbriller, høreværn og handsker.
- Sørg for, at arbejdsemnet er sikkert klamped before drilling.
- Hold hænder og fingre væk fra det roterende borehoved.
- Afbryd strømmen, før du foretager justeringer, skifter bor eller udfører vedligeholdelse.
- Brug ikke maskinen i damp eller våde forhold.
- Sørg for, at arbejdsområdet er godt oplyst og fri for rod.
- The on/off switch with zero voltage trigger prevents accidental restart after a power failure.
Opsætning og montering
Før første brug skal du sørge for, at alle komponenter er til stede og korrekt samlet.
- Udpakning: Carefully remove all parts from the packaging. Verify against the packing list.
- Samling af base og søjle: Fastgør søjlen sikkert til basen ved hjælp af de medfølgende fastgørelseselementer.
- Headstock Installation: Mount the headstock onto the top of the column.
- Work Table Attachment: Slide the work table assembly onto the column and secure it at a comfortable working height.
- Montering af borepatron: Insert the toothed crown chuck and MK2 chuck onto the spindle. Ensure it is firmly seated.
- Chip Guard Installation: Attach the folding chip guard for safety during operation.
Figur 2: Detalje view of the drill chuck and the transparent, folding chip guard, emphasizing safety features.
Betjeningsvejledning
Follow these steps for safe and effective operation of your drill press.
1. Adjusting Drilling Speed
The drill press offers 12 speed levels (200 to 2,450 rpm) to suit different materials. Speed adjustment is done by changing the belt position on the pulleys located in the headstock.
- Afbryd strømforsyningen.
- Open the top cover of the headstock.
- Loosen the motor tensioning bolt to allow belt movement.
- Move the belt to the desired pulley combination for the required speed. Refer to the speed chart inside the cover.
- Retighten the motor tensioning bolt and close the cover.
Figur 3: Intern view of the drill press headstock, showing the belt and pulley system used for adjusting drilling speeds.
2. Adjusting Work Table
The work table can be adjusted for height, rotation, and tilt to accommodate various workpieces.
- Højdejustering: Loosen the table locking handle and use the crank to move the table up or down the column. Securely tighten the handle once the desired height is reached.
- Rotation: The table can rotate up to 90° around the column. Loosen the table locking handle, rotate, and retighten.
- Vip: The table can tilt up to 45° left or right. Loosen the tilt locking bolts, adjust the angle, and retighten.
Figure 4: Illustration demonstrating the vertical height adjustment of the drill press work table.
Figure 5: Illustration demonstrating the tilt adjustment of the drill press work table, allowing angled drilling.
3. Setting Drilling Depth
The adjustable depth stop allows for precise and repeatable drilling up to a maximum depth of 60 mm.
- Lower the drill bit until it just touches the workpiece.
- Lock the spindle in this position.
- Adjust the depth stop collar to the desired drilling depth.
- Unlock the spindle. The drill will stop at the preset depth during operation.
Figure 6: Detail of the adjustable depth stop, which ensures consistent drilling depth for repetitive tasks.
4. Boreoperation
Figure 7: A user demonstrating the drill press in action, drilling into a wooden workpiece, highlighting proper usage.
- Select the appropriate drill bit (1.5 to 16 mm diameter) and secure it firmly in the chuck.
- Position the workpiece on the table and clamp it securely to prevent movement during drilling.
- Adjust the table height and depth stop as needed.
- Turn on the drill press using the ON switch.
- Slowly lower the drill bit into the workpiece using the three-arm cross handle, applying steady, even pressure.
- Once drilling is complete, retract the drill bit from the workpiece.
- Turn off the drill press using the OFF switch.
Opretholdelse
Regelmæssig vedligeholdelse sikrer din borepresses levetid og optimale ydeevne.
- Rensning: After each use, clean the machine of dust, chips, and debris. Use a brush or vacuum cleaner. Do not use solvents that may damage plastic parts.
- Smøring: Periodically apply a light machine oil to moving parts such as the column, rack, and spindle.
- Bælteinspektion: Regularly check the drive belt for wear, cracks, or tension. Replace if necessary.
- Vedligeholdelse af borepatron: Hold spændepatronens kæber rene og fri for snavs for at sikre korrekt greb om borehovederne.
- Opbevaring: Opbevar borepressen et tørt og rent miljø, når den ikke er i brug.
Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Motor starter ikke. | No power supply; ON/OFF switch with zero voltage trigger activated. | Check power connection; press the ON switch again. |
| Drill bit wobbles. | Drill bit not properly secured; bent drill bit; damaged chuck. | Re-secure drill bit; replace bent bit; inspect/replace chuck. |
| Overdreven vibration. | Loose components; worn bearings; unbalanced workpiece. | Check all fasteners; contact service for bearings; secure workpiece properly. |
| Borehovedet sidder fast. | Too much feed pressure; dull drill bit; incorrect speed for material. | Reduce pressure; sharpen/replace bit; adjust speed. |
Specifikationer
Key technical specifications for the Einhell TC-BD 630/1 Drill Press.
Figur 8: Forside view technical drawing with key dimensions, including drilling depth and table size.
Figur 9: Side view technical drawing with overall height and table adjustment range.
- Model: TC-BD 630/1 (4520597)
- Strømindgang: 630 W
- Voltage: 230 volt
- Hastighedsniveauer: 12 (200 - 2,450 rpm)
- Drilling Depth (max.): 60 mm
- Drill Diameter (max.): 16 mm
- Chuck type: Toothed crown chuck with MK2 chuck
- Bordjustering: Height adjustable, 90° rotatable, 45° tiltable
- Produktdimensioner: 33.5 x 83.2 x 57 cm
- Varens vægt: 19.4 kg
- Særlige funktioner: Induction motor, ball bearing drill spindle, adjustable depth stop, folding chip guard.
Garanti og support
For warranty information, technical support, or spare parts, please contact Einhell customer service or visit the official Einhell webwebstedet. Behold din købskvittering som købsbevis.
Du kan finde mere information og kontaktoplysninger på Einhell butiksside.
