Fortis EX20700 Extension Kit for Diverter Valves

Indledning

This manual provides instructions for the installation, operation, and maintenance of the Fortis EX20700 Extension Kit for Diverter Valves. This kit is designed to extend the reach of various Fortis valve trims, ensuring proper fit and function in specific plumbing configurations. Please read these instructions thoroughly before beginning installation.

Pakkens indhold

Verify that all components are present before proceeding with installation. The Fortis EX20700 Extension Kit typically includes the following parts:

• Main Extension Pipe
• Extension Sleeves (2)
• Connecting Pins (2)
• Sealing Ring (1)

Figur 1: eksploderede view of the Fortis EX20700 Extension Kit components. This image displays the main extension pipe, two extension sleeves, two connecting pins, and a sealing ring, illustrating how the parts fit together for assembly.

Opsætning og installation

This extension kit is designed to be installed with compatible Fortis diverter valves. Refer to the specific diverter valve's instruction manual for detailed valve installation steps. The following steps outline the general procedure for installing the extension kit:

1. Forberedelse: Ensure the water supply to the diverter valve is turned off. Clear the work area and have all necessary tools ready.
2. Identificér forbindelsespunkter: Locate the points on your Fortis diverter valve trim where the extension is required.
3. Assemble Extension: Carefully align the main extension pipe with the valve body or existing trim component. Insert the connecting pins through the designated holes to secure the main extension pipe.
4. Install Sleeves: Slide the extension sleeves over the main extension pipe, ensuring a snug fit. These sleeves often provide aesthetic coverage and additional stability.
5. Sikre forbindelser: Tighten any threaded connections by hand, then use an appropriate wrench for a final quarter-turn, being careful not to overtighten. Ensure the sealing ring is properly seated to prevent leaks.
6. Test for lækager: Once installation is complete, slowly turn on the water supply and carefully inspect all connections for any signs of leakage. Address any leaks immediately by tightening connections or re-seating components.

If you encounter any difficulties, consult a qualified plumber.

Drift

The Fortis EX20700 Extension Kit itself does not have operational controls. Its function is to extend the reach of your Fortis diverter valve. Operate the diverter valve according to its specific user manual. The extension kit ensures that the valve's functionality is maintained with the extended trim.

Opretholdelse

To maintain the finish and performance of your Fortis EX20700 Extension Kit:

• Rensning: Clean the brushed gold finish regularly with a soft, damp klud. Undgå slibende rengøringsmidler, stærke kemikalier eller skuresvampe, da disse kan beskadige overfladen.
• Inspektion: Periodically check all connections for tightness and signs of wear. If any components appear damaged or loose, consult a professional for repair or replacement.
• Undgå skader: Do not use excessive force when operating the diverter valve, as this could stress the extension components.

Fejlfinding

If you experience issues after installing the Fortis EX20700 Extension Kit, consider the following:

• Lækager ved tilslutninger: If water leaks from the extension kit connections, ensure all components are properly seated and tightened. The sealing ring must be correctly positioned. Do not overtighten.
• Løse komponenter: If any part of the extension feels loose, re-check the connecting pins and ensure they are fully engaged.
• Difficulty Operating Valve: If the diverter valve becomes difficult to operate after installation, verify that the extension kit is not impeding the valve's internal mechanism. Re-installation may be necessary, ensuring proper alignment.

For persistent issues, contact Fortis customer support or a qualified plumbing professional.

Specifikationer