TFA Dostmann 60.3550.16 Radiostyret vægur Brugsanvisning

Indledning

Thank you for choosing the TFA Dostmann 60.3550.16 Radio Controlled Wall Clock. This modern analogue clock offers high accuracy through radio signal reception, automatically adjusting for daylight saving time. Designed for clarity and ease of use, it features a clear dial with large numbers and a distinct second hand, protected by a glass cover. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your new wall clock.

Billede: Forside view of the TFA Dostmann 60.3550.16 Radio Controlled Wall Clock. This image illustrates the clock's modern design, clear dial, and distinct hands.

Sikkerhedsoplysninger

Læs venligst disse sikkerhedsinstruktioner omhyggeligt, inden du bruger enheden, for at forhindre personskade eller beskadigelse.

• Denne enhed er kun beregnet til indendørs brug.
• Udsæt ikke uret for ekstreme temperaturer, direkte sollys eller høj luftfugtighed.
• Undgå at tabe uret eller udsætte det for hårde stød.
• Opbevar batterier utilgængeligt for børn. Søg omgående læge ved indtagelse.
• Replace batteries promptly when low to prevent leakage, which can damage the device.
• Bortskaf brugte batterier i henhold til lokale regler. Batterier må ikke smides i ild.
• Do not attempt to repair the device yourself. Contact qualified personnel for service.

Pakkens indhold

Sørg for at alle varer er til stede i pakken:

• 1x TFA Dostmann 60.3550.16 Radio Controlled Wall Clock
• 1x brugsanvisning

Note: 1x AA 1.5V battery is required and not included in the package.

Opsætning

1. Batteriinstallation

To power your clock, install one AA 1.5V battery:

1. Fjern batteridækslet på bagsiden af ​​uret.
2. Insert one new AA 1.5V battery, ensuring the correct polarity (+ and -).
3. Sæt batterirummets dæksel på igen.

Billede: Bagside view of the clock showing the battery compartment. This image helps identify where to insert the battery and locate control buttons.

2. Indledende tidssynkronisering

After battery insertion, the clock will automatically attempt to receive the DCF radio time signal. This process may take several minutes:

1. The hands will move to the 12 o'clock position and then begin searching for the radio signal.
2. Når signalet er modtaget, vil uret automatisk indstille sig til det korrekte tidspunkt.
3. Place the clock near a window or in an open area for optimal signal reception during initial setup. Avoid placing it near electronic devices that may cause interference.

3. Manual Time Setting (If Radio Signal Unavailable)

In areas with poor radio signal reception, you may need to manually set the time. Refer to the back of the clock for control buttons:

• REC-knap: Press this button to initiate a manual search for the radio signal.
• SET -knap: If the radio signal cannot be received, press and hold the SET button to manually adjust the time. Each press will advance the minute hand.

4. Montering

The clock is designed for wall mounting:

1. Select a suitable location on a wall, ensuring it is sturdy enough to hold the clock's weight (approximately 455g).
2. Brug en skrue eller et søm (medfølger ikke), der passer til din vægtype.
3. Hang the clock using the integrated hanging hole on the back of the device.

Drift

Automatisk tidsjustering

Once the radio signal is successfully received, your TFA Dostmann wall clock will automatically:

• Maintain precise time accuracy.
• Adjust automatically for Daylight Saving Time (summer/winter time changes).

The clock will periodically check and update its time signal to ensure continuous accuracy.

Opretholdelse

Rensning

To clean your clock:

• Brug en blød, tør eller let damp klæde.
• Do not use abrasive cleaners, solvents, or polishing agents, as these can damage the glass cover or casing.

Udskiftning af batteri

When the clock hands stop moving or the time becomes inaccurate, it is time to replace the battery:

1. Remove the old AA 1.5V battery from the compartment.
2. Insert a new AA 1.5V battery, observing correct polarity.
3. The clock will then attempt to resynchronize with the radio signal.

Fejlfinding

Hvis du støder på problemer med dit ur, kan du se følgende almindelige problemer og løsninger:

• Clock not setting time or displaying incorrect time:
  - Ensure the battery is new and inserted with correct polarity.
  - Press the 'REC' button on the back to initiate a manual signal search.
  - Move the clock to a different location, preferably near a window and away from electronic devices (TVs, computers, microwaves) that may cause interference.
  - Allow sufficient time (up to several hours) for the clock to receive the radio signal, especially during initial setup or after battery change.
• Hands are stuck or not moving:
  - Replace the battery with a fresh AA 1.5V battery.
  - Check for any obstructions preventing the hands from moving freely.
• Dårlig radiosignalmodtagelse:
  - The radio signal (DCF77) is transmitted from Mainflingen, Germany. Reception can be affected by geographical location, building materials, and local interference.
  - Try placing the clock in different orientations or locations within the room.
  - If consistent reception is not possible, use the manual time setting feature.

Specifikationer

Billede: Forside view of the clock with dimensions. This image visually represents the physical size of the clock.

Garanti og support

TFA Dostmann products are manufactured with quality and precision. For warranty information, please refer to the terms and conditions provided at the point of purchase or visit the official TFA Dostmann website. If you require technical support or have questions not covered in this manual, please contact your retailer or the TFA Dostmann customer service department.

Gem venligst denne manual til fremtidig reference.