Indledning
This manual provides essential information for the setup, operation, and maintenance of your HAIBOXING 16890SA 1/16 Scale 4WD Brushless RC Truck. Please read this manual thoroughly before operating the vehicle to ensure proper function and safety.
Image: The HAIBOXING 16890SA 1/16 Scale 4WD Brushless RC Truck.
Sikkerhedsoplysninger
Vigtige sikkerhedsforanstaltninger:
- Disconnect and remove the battery pack from the vehicle when not in use. This prevents potential damage from a leaking rechargeable battery pack.
- To prolong battery life, avoid completely draining the battery. Fully charge the battery pack before each use.
- Do not leave the battery pack uncharged for extended periods.
- Store the battery pack in a dry, clean, and cool environment.
- This is a model-grade product. Read the user manual carefully before use to avoid potential damage, loss of control, or safety hazards.
Hvad er der i æsken
Bekræft at alle komponenter er til stede ved udpakning:
- Fjernbetjening
- 7.4V (2S) 1200mAh Li-Po Batteries (Two included; one pre-installed in vehicle, one in box)
- Produktmanual
- USB Charging Cables (Two included)
- Skruetrækker
- Paddle Tires (x4)
- Body Decals
- Wheelie Bar
- Lille korsnøgle
- Wheel Hex. Pins (x6)
- M4 låsemøtrikker (x6)
- Body Clips (x4)
- Bind stik
Billede: Overview of the HAIBOXING 16890SA RC Truck and its included accessories.
Komponenter overview
Brushless Motor and Drivetrain
The HAIBOXING 16890SA is equipped with a 2840 3800KV brushless motor, providing efficient power delivery. The drivetrain features premium powdered metallurgy gears, metal universal driveshafts, and reinforced PA material for durability and high-speed performance.
Image: The HAIBOXING 16890SA RC Truck demonstrating its speed, highlighting the brushless motor and 4x4 off-road capabilities.
Chassis and Suspension
The refined 4WD chassis includes front and rear independent suspension and full-metal oil-filled shocks for superior handling across various terrains. Ball bearings and metal ball studs are integrated throughout the drivetrain and moving joints for smooth operation.
Billede: Detaljeret view of the HAIBOXING 16890SA's internal components, showcasing the 4WD drivetrain, aluminum body threaded oil-filled shocks, and metal gears.
Elektronisk system
The 2.4GHz remote control system provides a range of up to 330 feet. The electronic system features a separate receiver and a Hobbywing brushless ESC (Electronic Speed Controller) with water-resistant and thermal protection. It also includes motor anti-jam safeguards and low voltage alert indication.
Body and Tires
The vehicle features a flexible 1mm thick PVC body and includes animated DIY decals for customization. It comes with sponge-inserted off-road tires and optional paddle tires, suitable for snowy and sandy surfaces. A wheelie bar is provided to enhance stability during rapid acceleration.
Image: Close-up details of the HAIBOXING 16890SA, showing the separate ESC and receiver, paddle tires for sand, aluminum oil-filled shocks, and the optional wheelie bar.
Opsætning
Installation af batteri
Bilbatteri: The HAIBOXING 16890SA uses a 7.4V (2S) 1200mAh Li-Po battery. One battery is typically pre-installed. Ensure it is securely connected.
Batterier til fjernbetjening: The remote control requires AA batteries (not included). Open the battery compartment on the remote and insert the batteries according to the polarity indicators.
Opladning af batterier
Use the provided USB charging cables. Connect the cables to a compatible USB power adapter (rated at 5V, 2A or lower, not included). Connect the other end to the Li-Po batteries. The two included USB cables allow for simultaneous charging of both batteries.
Forsigtighed:
- Always supervise batteries during charging.
- Oplad ikke beskadigede eller hævede batterier.
- Charge batteries on a non-flammable surface away from combustible materials.
Throttle Range Calibration (ESC Setup)
To ensure the ESC (Electronic Speed Controller) matches the throttle range of your transmitter, calibration is necessary. This procedure should be performed when using a new ESC, a new transmitter, or after adjusting EPA/ATV parameters.
- Forberedelse af sender: Switch off the ESC. Turn on the transmitter. Set the throttle channel direction to "forward" and "reverse". Disable the "ABS" brake function on your transmitter.
- Gå ind i kalibreringstilstand: Hold the "SET" button on the ESC. While holding, switch on the ESC. Release the "SET" key immediately once the red LED begins to flash.
- Set Three Points: Follow the visual cues from the ESC's LED indicators to set the three throttle points:
- Neutral Point: With the throttle trigger at neutral, press the "SET" button. The green LED will flash once.
- End Point of Forward Direction: Pull the throttle trigger to its maximum forward position, then press the "SET" button. The green LED will flash twice.
- End Point of Backward Direction: Push the throttle trigger to its maximum backward position, then press the "SET" button. The green LED will flash three times.
- Færdiggørelse: Once the calibration process is finished, the motor will start after 3 seconds.
Note:
If you do not release the "SET" key after the red LED begins to flash, the ESC will enter program mode. In such a case, switch off the ESC and re-calibrate the throttle range from step A to D.
Image: Visual guide for calibrating the ESC throttle range, showing transmitter positions and corresponding LED feedback.
Betjeningsvejledning
Grundlæggende kontrol
- Gashåndtag: Pull the trigger towards you to accelerate forward. Push the trigger away from you to brake, and push again for reverse.
- Rat: Turn the steering wheel left or right to control the vehicle's direction.
Køretips
- Start with gentle throttle inputs to familiarize yourself with the vehicle's response.
- Practice steering in open areas before attempting more complex maneuvers.
- The vehicle is designed for all terrains. Adjust your driving style based on the surface (e.g., loose dirt, grass, sand).
Speed Performance
With the included 7.4V (2S) Li-Po batteries, the truck can reach speeds over 28 mph (45 km/h). For increased performance, equipping the vehicle with a 3S battery (not included) can enable speeds surpassing 40 mph (64 km/h).
Opretholdelse
Rensning
- After each use, especially in dirty or wet conditions, clean the vehicle to remove dirt, dust, and debris.
- Brug en blød børste eller trykluft til at rengøre svært tilgængelige områder.
- Wipe down the body and chassis with a damp cloth. Ensure all electronic components are dry before storage or next use.
Inspektion af komponenter
- Regularly check for loose screws, damaged parts, or worn tires.
- Inspect the suspension components, driveshafts, and gears for any signs of wear or damage.
- Ensure battery connectors are clean and free from corrosion.
Opbevaring
- Store the vehicle in a cool, dry place away from direct sunlight and extreme temperatures.
- Remove batteries from both the vehicle and the remote control before long-term storage.
- Store Li-Po batteries at a storage voltage (typically around 3.8V per cell) to maintain their health.
Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Køretøjet reagerer ikke på fjernbetjeningen. |
|
|
| Reduced speed or run time. |
|
|
| Steering issues. |
|
|
Specifikationer
- Produktdimensioner: 12 x 8.6 x 4.5 tommer
- Varens vægt: 1.92 pund
- Varemodelnummer: 16890SA
- Producentens anbefalede alder: 8 år og opefter
- Batterier: 1 Lithium Polymer battery required (included, 7.4V 1200mAh)
- Motor: 2840 3800KV børsteløs motor
- ESC: Hobbywing Brushless ESC (water-resistant, thermal protection)
- Fjernbetjeningssystem: 2.4 GHz
- Top Speed (2S Battery): Over 28 mph (45 km/h)
- Top Speed (3S Battery, not included): Over 40 mph (64 km/h)
Image: Dimensions of the HAIBOXING 16890SA RC Truck, showing its length, width, and height.
Garanti og support
The HAIBOXING 16890SA includes a 3-Month Protection Plan for factory-defective RC parts. For warranty claims or technical support, please contact the seller via Amazon Messages for prompt service.
