1. Introduktion
Welcome to the world of ROBOTIME 3D Wooden Puzzles! This instruction manual provides essential information for assembling, operating, and maintaining your Big Ben (TG507) and Eiffel Tower (TGL01) DIY model building kits. These kits offer a fun and engaging experience, culminating in beautiful, illuminated architectural replicas.
The Big Ben model is a replica of the famous British landmark, while the Eiffel Tower model represents the iconic French structure. Both models feature integrated LED lighting to enhance their display.
Image 1.1: The assembled ROBOTIME Big Ben and Eiffel Tower 3D wooden puzzles, showcasing their intricate details and warm LED illumination.
2. Hvad er der i æsken
Upon opening your ROBOTIME 3D Wooden Puzzle kit, you will find the following components:
- 3D Wooden Puzzle Pieces: Precisely cut wooden sheets containing all the parts required for assembly.
- LED lys: Integrated lighting components to illuminate your finished model.
- Instruktionsmanual: A detailed, step-by-step guide specific to your model (Big Ben or Eiffel Tower).
- Sanding Paper: For smoothing edges if necessary.
- Small Tools (Optional): Some kits may include a small tool for easier assembly.
Note: A Type-C cable for the Eiffel Tower's LED lights is not included and must be arranged separately.
3. Opsætning og montering
Assembling your ROBOTIME 3D wooden puzzle is a rewarding process. Please follow the specific instructions provided in the manual included with your kit for the best results. The general steps are outlined below:
3.1 Forberedelse
- Udpak komponenter: Fjern forsigtigt alle træplader og andre komponenter fra emballagen.
- Identificer dele: Familiarize yourself with the different wooden sheets and the parts labeled on them. Refer to the parts diagram in your kit's manual.
- Forbered arbejdsområde: Ensure you have a clean, well-lit, and spacious area to work on.
3.2 Samlingsproces
- Punch Out Pieces: Gently press out the individual wooden pieces from their sheets. If a piece is difficult to remove, use a craft knife or the provided tool to carefully cut the connecting points.
- Glatte kanter: Use the included sanding paper to smooth any rough edges on the pieces for a better fit and finish.
- Følg de nummererede trin: The included instruction manual provides a numbered, pictorial guide. Assemble the pieces in the exact order specified.
- Interlock Pieces: Most pieces interlock without glue. Apply gentle, even pressure to fit them together. If a connection is particularly tight, ensure alignment before applying force.
- Integrer LED-lys: As you progress, the manual will guide you on where and how to install the LED light components. Ensure wires are routed correctly and connections are secure.
- Complete Sections: Build the model section by section, ensuring each part is firmly in place before moving to the next.
Image 3.1: The Big Ben model, fully assembled and illuminated, serving as a decorative piece.
Billede 3.2: Detaljeret views of the Big Ben model, highlighting the craftsmanship.
Image 3.3: Detailed features of the Eiffel Tower model, including its power input.
4. Betjening af LED-lysene
Once your model is fully assembled and the LED lights are integrated, you can illuminate your creation.
- Strømkilde: The LED lights are typically powered via a USB connection. For the Eiffel Tower, a Type-C USB cable (not included) is required.
- Forbindelse: Connect the USB cable to the designated port on your model (e.g., the Type-C port on the Eiffel Tower) and plug the other end into a compatible USB power adapter (e.g., phone charger, computer USB port, power bank).
- Aktivering: The lights should illuminate automatically once power is supplied. There is typically no separate switch.
Image 4.1: The Eiffel Tower model, illuminated and displayed as a decorative item.
5. Vedligeholdelse
To ensure the longevity and appearance of your ROBOTIME 3D wooden puzzle models, follow these simple maintenance guidelines:
- Rensning: Dust the model regularly with a soft, dry cloth or a soft brush. Avoid using abrasive cleaners or wet cloths, which can damage the wood.
- Undgå fugt: Keep the models away from water, high humidity, and direct exposure to liquids, as wood can warp or swell.
- Undgå direkte sollys: Prolonged exposure to direct sunlight can cause the wood to fade or crack. Place your models in a location with indirect light.
- Håndteres med forsigtighed: While assembled, the models are sturdy, but avoid dropping them or applying excessive force, which could break delicate parts.
6. Fejlfinding
Hvis du støder på problemer under montering eller betjening, kan du overveje følgende almindelige løsninger:
- Brikkerne passer ikke:
- Ensure you are using the correct pieces for the current step. Refer to the instruction manual's diagrams.
- Check for rough edges and use sanding paper to smooth them.
- Ensure proper alignment before applying gentle pressure. Do not force pieces.
- Manglende stykker:
- Double-check all wooden sheets and packaging. Small pieces can sometimes be overlooked.
- If a piece is genuinely missing, contact ROBOTIME customer support (see Section 8).
- LED-lys virker ikke:
- Sørg for, at USB-kablet er korrekt tilsluttet til både modellen og strømkilden.
- Prøv en anden USB-strømadapter eller -port.
- Verify that the internal wiring connections are intact and not pinched or broken during assembly.
- Modellen er ustabil:
- Review previous assembly steps to ensure all connections are firm and pieces are fully interlocked.
- Ensure the model is placed on a flat, stable surface.
7. Specifikationer
Key specifications for the ROBOTIME 3D Wooden Puzzle models:
- Produkttype: 3D Wooden Puzzle DIY Model Building Kit
- Inkluderede modeller: Big Ben (TG507), Eiffel Tower (TGL01)
- Materiale: Træ
- Belysning: Integrerede LED-lys
- Power Source for LEDs: USB (Type-C for Eiffel Tower, cable not included)
- Assembly Size (Big Ben): Cirka 3.9 x 4.2 x 7.5 tommer (L x B x H)
- Assembly Size (Eiffel Tower): Dimensions vary slightly, refer to product packaging for exact measurements.
- Fabrikant: ROBOTIME
Image 7.1: Dimensions of the assembled Big Ben model.
8. Garanti og support
ROBOTIME is committed to providing high-quality products. While specific warranty details are not provided in this general manual, most products come with a standard manufacturer's warranty against defects in materials and workmanship.
For any questions, concerns, or support needs regarding your ROBOTIME 3D Wooden Puzzle kit, please contact ROBOTIME customer service through their official channels or the retailer where you purchased the product.
You can visit the official ROBOTIME store for more information and contact options: ROBOTIME Official Store
