Indledning
This manual provides instructions for the Schwinn Quick Wrap Bike Light Set, designed to enhance visibility and safety during cycling. The set includes one headlight and one taillight, both featuring LED technology for bright illumination. Please read these instructions thoroughly before use.
Image: The Schwinn Quick Wrap Bike Light Set, featuring a white headlight and a red taillight.
Pakkens indhold
- 1 x Schwinn Quick Wrap LED Headlight
- 1 x Schwinn Quick Wrap LED Taillight
Note: 3 AAA batteries are required for each light and are not included.
Opsætning
1. Batteriinstallation
- Locate the battery compartment on the rear of each light unit.
- Åbn forsigtigt dækslet til rummet.
- Sæt 3 AAA-batterier i hver lampe, og sørg for korrekt polaritet (+/-).
- Luk dækslet til batterirummet forsvarligt.
2. Monteringsvejledning
The Quick Wrap bike lights feature a tool-free strap design for easy attachment.
- For the Headlight: Wrap the integrated strap around your bicycle's handlebar. Ensure the light faces forward and is positioned securely.
- For the Taillight: Wrap the integrated strap around your bicycle's seat post. Ensure the light faces backward and is positioned securely.
Image: The headlight attached to a bicycle handlebar, facing forward.
Image: The taillight attached to a bicycle seatpost, facing backward.
Betjeningsvejledning
Each light unit has a single power button to control its functions.
- Tænd/sluk: Press the power button once to turn the light on. Press and hold the button for approximately 2 seconds to turn the light off.
- Skift tilstande: With the light on, press the power button repeatedly to cycle through the available lighting modes:
- Konstant tilstand: Giver kontinuerlig belysning.
- Flashtilstand: Provides intermittent flashing for increased visibility.
Image: The Schwinn Quick Wrap Bike Lights demonstrating the two available modes: steady and flash.
Opretholdelse
Udskiftning af batteri
When the light output diminishes or the light fails to turn on, it is time to replace the batteries. Follow the battery installation steps outlined in the Setup section.
Rensning
The lights are waterproof (IPX4 rated). To clean, wipe the exterior with a damp klæde. Brug ikke slibende rengøringsmidler eller opløsningsmidler.
Fejlfinding
- Lyset tænder ikke:
- Ensure batteries are installed correctly with the proper polarity.
- Udskift gamle batterier med nye AAA-batterier.
- Lyset er svagt:
- Udskift batterierne med nye AAA-batterier.
Produktspecifikationer
Image: A table detailing the specifications for the headlight and taillight.
| Feature | Forlygte | Baglygte |
|---|---|---|
| Lysstyrke | 40 lumen | 10 lumen |
| Stråleafstand | 32 fod | 20 fod |
| Strømkilde | 3 AAA Batteries (each light) | |
| Steady Mode Run Time | Op til 20 timer | Op til 18.5 timer |
| Flash Mode Run Time | Op til 107 timer | Op til 127 timer |
| Materiale | Plast | |
| Vandmodstand | IPX4 (vandtæt) | |
| Monteringstype | Quick Wrap Strap (Handlebar/Seat Post) | |
| Antal indstillinger | 2 (Steady, Flash) | |
| Varens vægt | 0.1 kilogram (i alt for sættet) | |
| Modelnavn | Schwinn LED værktøjsfri cykellygte | |
| UPC | 038675265035 | |
Garantioplysninger
This Schwinn product comes with a Limited Warranty. For specific details regarding warranty coverage and terms, please refer to the documentation included with your purchase or visit the official Schwinn webwebsted.
Kundesupport
For further assistance, technical support, or inquiries regarding your Schwinn Quick Wrap Bike Light Set, please visit the official Schwinn webwebstedet eller kontakt deres kundeserviceafdeling. Kontaktoplysninger kan typisk findes på produktemballagen eller mærkets officielle online tilstedeværelse.