Indledning
The Cisco Catalyst 1300-24P-4G switch is a fully managed network switch designed to provide reliable and secure connectivity for small business networks. This device facilitates digital transformation by offering comprehensive Layer 2/3 capabilities, an intuitive web dashboard, advanced networking features, and Power over Ethernet Plus (PoE+) support.
Image: Cisco Catalyst 1300 Series Managed Switches banner, highlighting the product line.
Hvad er der i æsken
Bekræft at alle varer er til stede i pakken:
- Cisco Catalyst 1300-24P-4G Switch
- Netledning eller adapter
- USB Type C kabel
- Mounting hardware (for rack or wall mounting)
Opsætningsinstruktioner
1. Fysisk installation
The switch can be installed on a desktop or mounted in a rack. Ensure adequate ventilation around the device to prevent overheating.
- Desktopplacering: Placer kontakten på en flad, stabil overflade.
- Rack montering: Use the provided mounting hardware to secure the switch in a standard 19-inch equipment rack.
2. Tilslut strøm
Connect the provided power cord to the switch's power input and then to a grounded electrical outlet. The switch will power on automatically.
3. Tilslut netværkskabler
Connect your network devices (computers, servers, access points, IP cameras, etc.) to the 24 Gigabit Ethernet ports using standard Ethernet cables. For uplink connections to your core network or other switches, use the 4x 1GE SFP uplink ports.
Image: Front panel of the Cisco Catalyst 1300-24P-4G switch, showing 24 Gigabit Ethernet ports with PoE+ capability and 4 SFP uplink ports.
4. Adgang til indledende konfiguration
The Cisco Catalyst 1300 series switches offer multiple ways for initial configuration:
- Web Brugergrænseflade (Web UI): Connect a computer directly to any of the switch's data ports. The switch will typically obtain an IP address via DHCP or use a default IP. Access the Web UI via a web browser.
- Cisco Business Mobile-app: Download the Cisco Business mobile app for guided setup and management.
- Cisco Business Dashboard: For centralized management of multiple Cisco Business devices.
Refer to the Cisco documentation for detailed steps on accessing the management interface and initial setup wizard.
Betjeningsvejledning
Tænd/sluk
Once connected to power, the switch will automatically power on. To power off, disconnect the power cord. For proper shutdown procedures, consult the advanced configuration guide if available through the management interface.
Netværksforbindelse
The switch provides 24 Gigabit Ethernet ports for connecting devices at 10/100/1000 Mbps speeds. The 4 SFP ports are for 1 Gigabit Ethernet uplinks, allowing connection to other network devices or a core network.
Power over Ethernet Plus (PoE+)
The 24 ports support PoE+ with a total power budget of 195W. This allows you to power compatible devices such as IP phones, wireless access points, and IP cameras directly through the Ethernet cable, simplifying deployment and reducing cabling requirements.
Management interface
The switch is fully managed, offering advanced configuration options through its Web UI, CLI (Command Line Interface), and Cisco Business mobile app. These interfaces allow you to configure VLANs, QoS, security features, and monitor network performance.
Image: Multiple Cisco Catalyst 1300 Series switches stacked, illustrating scalability.
Opretholdelse
Firmware opdateringer
Tjek regelmæssigt Cisco-supporten website for the latest firmware updates. Applying updates can improve performance, add new features, and address security vulnerabilities. Follow the instructions provided with the firmware package for a safe update process.
Rensning
Keep the switch clean and free of dust. Use a soft, dry cloth to wipe the exterior. Do not use liquid or aerosol cleaners directly on the switch. Ensure ventilation openings are clear of obstructions.
Miljøhensyn
Operate the switch within its specified temperature range (up to 45 degrees Celsius) and humidity levels. Avoid placing the switch in direct sunlight or near heat sources.
Fejlfinding
Ingen strøm
- Kontroller, at netledningen er korrekt tilsluttet til både afbryderen og stikkontakten.
- Sørg for, at stikkontakten er funktionel.
Ingen netværksforbindelse
- Check the Ethernet cable connections to ensure they are secure and not damaged.
- Verify the link/activity LEDs on the switch ports are illuminated.
- Confirm the connected device is powered on and configured correctly.
- Check the switch's configuration via the Web UI to ensure ports are enabled and VLAN settings are correct.
PoE+ Device Not Receiving Power
- Ensure the connected device is PoE+ compatible.
- Check the PoE status LEDs on the switch.
- Verify the switch's PoE power budget (195W) is not exceeded.
- Consult the switch's Web UI for PoE port settings and power allocation.
Forbedrede sikkerhedsfunktioner
The switch includes advanced security features such as IP-MAC port binding to detect and block deliberate network attacks, and IPv6 First Hop Security for protection against address spoofing and man-in-the-middle attacks on IPv6 networks. If experiencing security-related issues, review these configurations in the management interface.
Specifikationer
| Feature | Detalje |
|---|---|
| Modelnummer | C1300-24P-4G |
| Produktmål (LxBxH) | 17.5 cm x 11.76 cm x 1.73 cm |
| Varens vægt | 10.16 pund (4.62 kilo) |
| Antal havne | 24 x 10/100/1000 GE, 4 x 1GE SFP Uplinks |
| Interface Type | PoE, SFP |
| PoE Power Budget | 195 Watts (PoE, PoE+) |
| Dataoverførselshastighed | 1 Gigabit i sekundet |
| Voltage | 28 volt |
| Maksimal driftstemperatur | 45 grader Celsius |
| Etui materiale | Plast |
| Energieffektivitet | IEEE 802.3az Energy Efficient Ethernet compliant |
| UPC | 889728521512 |
Image: Feature comparison table between Cisco Catalyst 1200 Series Smart Switches and 1300 Series Managed Switches.
Garantioplysninger
Cisco Catalyst 1300-24P-4G Managed Switch leveres med en Begrænset livstidsgaranti på hardware. This warranty covers defects in materials and workmanship under normal use. Additionally, it includes complimentary 1 års teknisk support.
For specific terms and conditions, including return to factory replacement procedures, please refer to the official Cisco warranty documentation available on their webwebsted.
Note: Some users have reported challenges with warranty claims or technical support when products are purchased from unauthorized resellers. It is recommended to register your product with Cisco and retain proof of purchase from an authorized channel to ensure full warranty and support eligibility.
Støtte
For further assistance, technical support, or to access additional documentation and software downloads, please visit the official Cisco support webwebsted:
You can also utilize the Cisco Business mobile app for convenient access to support resources and device management.
