Yaheetech metalsengeramme 140 x 200 cm brugsanvisning

1. Introduktion

Tak, fordi du har valgt Yaheetech metalsengerammen. Denne manual indeholder vigtige oplysninger om sikker montering, betjening og vedligeholdelse af din nye sengeramme. Læs venligst disse instruktioner omhyggeligt, inden du begynder monteringen, og gem dem til senere brug.

Image 1.1: Fully assembled Yaheetech Metal Bed Frame.

2. Sikkerhedsoplysninger

• Sørg for, at alle komponenter er til stede og ubeskadigede før montering. Må ikke anvendes, hvis der mangler eller er dele i stykker.
• Saml sengerammen på en blød, ren overflade for at forhindre ridser.
• Tighten all screws and bolts securely during assembly. Periodically check and re-tighten all fasteners to ensure stability.
• Overskrid ikke den maksimale vægtkapacitet på 360 kg.
• Hold små dele væk fra børn under montering for at undgå kvælningsfare.
• Stå eller hop ikke på sengerammen.
• Use the bed frame only for its intended purpose.

3. Pakkens indhold

Before starting assembly, verify that all parts are included in your package. While specific part numbers may vary, the package typically contains:

• Komponenter til hovedgærdet
• Fodpladekomponenter
• Sideskinner
• Lamelbundskomponenter
• Støtteben
• Anti-slip stoppers
• Assembly hardware (screws, bolts, washers, Allen key)
• Brugsanvisning

4. Opsætnings- og monteringsvejledning

Follow these steps carefully to assemble your Yaheetech Metal Bed Frame. It is recommended to have two people for assembly.

4.1. Forbered området

Clear a spacious area for assembly. Lay out all components on a soft, clean surface to prevent damage.

4.2. Assemble the Headboard and Footboard

Connect the headboard and footboard sections according to the diagrams provided in your specific assembly guide. Ensure all bolts are finger-tightened initially.

4.3. Attach Side Rails

Attach the side rails to the assembled headboard and footboard. Make sure the connections are secure. Do not fully tighten bolts yet.

4.4. Install Support Legs

The bed frame features 10 solid support legs for enhanced stability. Attach these legs to the designated points on the frame. Ensure they are firmly attached and evenly distributed.

Image 4.1: Reinforced support structure with 10 legs.

4.5. Assemble the Slatted Base

Position the metal slats into their designated slots on the side rails. Ensure each slat is properly aligned and secured. Some slats may require pressing into place to secure them.

Image 4.2: Detail of slat attachment mechanism.

4.6. Install Anti-Slip Stoppers

Attach the anti-slip stoppers to the designated areas on the bed frame. These prevent the mattress from sliding.

Image 4.3: Anti-slip stoppers keep the mattress in place.

4.7. Endelig tilspænding

Når alle komponenter er på plads og justeret, skal alle bolte og skruer strammes helt med den medfølgende unbrakonøgle. Spænd ikke for hårdt.

5. Betjeningsvejledning

5.1. Mattress Placement

Place your 140 x 200 cm mattress directly onto the slatted base. The design ensures the mattress remains stable and does not slide.

5.2. Opbevaring under sengen

The bed frame offers a ground clearance of 32 cm, providing ample space for under-bed storage. Utilize this area for boxes or containers to maximize room efficiency.

Image 5.1: 32 cm ground clearance for optimal storage.

6. Vedligeholdelse

• Rensning: Tør metalrammen af ​​med en blød kludamp klud. Undgå slibende rengøringsmidler eller barske kemikalier, der kan beskadige overfladen.
• Inspektion: Kontrollér regelmæssigt alle bolte og skruer for at sikre, at de forbliver stramme. Spænd dem igen om nødvendigt for at opretholde stabiliteten og forhindre knirken.
• Flytning: Når du flytter sengerammen, skal du løfte den i stedet for at trække den for at undgå at beskadige rammen eller gulvet.

7. Fejlfinding

• Knirkende lyde: If the bed frame squeaks, check all connections and tighten any loose bolts. Ensure the mattress is properly seated on the slats.
• Ustabilitet/Vinklen: Verify that all support legs are firmly on the ground and all fasteners are securely tightened. Ensure the bed frame is on a level surface.
• Madrasglidende: Confirm that the anti-slip stoppers are correctly installed and positioned.

8. Specifikationer

Detailed specifications for the Yaheetech Metal Bed Frame (Model YA-00129393):

Image 8.1: Product dimensions and load capacity.

9. Garanti og support

Yaheetech is committed to providing quality products. For any questions regarding assembly, missing parts, or product performance, please contact Yaheetech customer support. Please refer to your purchase documentation for specific warranty details.

Kontaktoplysninger:

• Besøg den officielle Yaheetech webwebsted for supportressourcer.
• Refer to your purchase platform (e.g., Amazon) for seller contact options.