SCHNEIDER SCDI30M

SCHNEIDER Domino Induktionskogeplade SCDI30M Brugermanual

Model: SCDI30M

1. Vigtige sikkerhedsoplysninger

Please read this manual carefully before installing or using your SCHNEIDER Domino Induction Hob SCDI30M. Keep this manual for future reference.

  • Elektrisk sikkerhed: Ensure the hob is correctly installed by a qualified electrician and connected to a suitable power supply. Do not operate with wet hands.
  • Varme og forbrændinger: The hob surface will become hot during and after use. Do not touch hot surfaces. Use oven mitts.
  • Ventilation: Ensure adequate ventilation around the hob as per installation instructions to prevent overheating.
  • Gryder: Brug kun induktionskompatibelt køkkengrej. Ikke-kompatibelt køkkengrej varmes ikke op.
  • Børn og kæledyr: Keep children and pets away from the hob during operation and while it is cooling down.
  • Rensning: Always disconnect the power supply before cleaning. Allow the hob to cool completely.

2. Produktet er slutview

The SCHNEIDER Domino Induction Hob SCDI30M is a compact and efficient cooking solution featuring two induction zones with precise knob controls. Its total power output of 3500 watts ensures rapid heating and uniform cooking.

SCHNEIDER Domino Induction Hob SCDI30M

Billede 1: Forside view of the SCHNEIDER Domino Induction Hob SCDI30M, showing its sleek black glass surface and two control knobs at the bottom.

Nøglefunktioner:

  • Domino induction hob design
  • Two cooking zones with individual boosters
  • Total power output of 3500 Watts
  • Compact dimensions: 28.8 cm (width) x 52 cm (depth)
  • Intuitive knob controls for precise temperature adjustment
  • 9 cooking levels per zone
  • Integrated timer function

3. Installation og opsætning

Installation of the SCHNEIDER Domino Induction Hob SCDI30M should only be performed by a qualified professional to ensure electrical safety and proper ventilation.

SCHNEIDER Domino Induction Hob SCDI30M Installation Dimensions

Image 2: Technical drawing showing the dimensions for the hob and the required cutout in the countertop, with measurements in millimeters.

Cutout Dimensions (in mm):

DimensionVærdi (mm)
Hob Length (L)288
Hob Width (W)520
Hob Height (H)60
Cutout Depth (D)56
Cutout Length (A)268
Cutout Width (B)500
Minimum Clearance (X)50

Ensure a minimum clearance of 250mm below the hob for proper ventilation, as indicated in the diagram. The hob is designed for flush mounting with a seal to prevent liquid ingress.

4. Betjeningsvejledning

The SCHNEIDER Domino Induction Hob SCDI30M is controlled via two intuitive rotary knobs, one for each cooking zone.

4.1 Turning On/Off and Adjusting Power

  1. Placer en induktionskompatibel pande på den ønskede kogezone.
  2. Turn the corresponding control knob clockwise to activate the zone and select a power level from 1 to 9. The display will show the selected level.
  3. To turn off a zone, turn its knob counter-clockwise until the display turns off.

4.2 Boosterfunktion

Each cooking zone is equipped with a booster function for rapid heating. This provides direct access to maximum power.

  • To activate the booster, turn the knob past level 9 to the 'B' (Booster) setting.
  • The booster will operate for a set period or until manually deactivated, providing intense heat for boiling water quickly or searing.
  • To deactivate, simply turn the knob back to a numbered power level.

4.3 Timer funktion

The integrated timer allows you to set a cooking duration for precise results.

  • While a cooking zone is active, press the timer button (usually indicated by a clock icon).
  • Use the +/- buttons or turn the knob (depending on model specifics) to set the desired cooking time.
  • Once the time expires, the cooking zone will automatically switch off, and an audible signal may sound.

4.4 Egnet køkkengrej

Induction hobs require cookware with a magnetic base. Test your cookware by placing a magnet on the bottom; if it sticks, it's compatible.

  • Compatible materials include cast iron, enameled steel, and stainless steel with a magnetic base.
  • Avoid glass, ceramic, aluminum, copper, or non-magnetic stainless steel cookware.

5. Vedligeholdelse og rengøring

Regular cleaning will keep your SCHNEIDER Domino Induction Hob in optimal condition.

  • Før rengøring: Always ensure the hob is switched off and has completely cooled down. Disconnect from the power supply if possible.
  • Daglig rengøring: For light spills and general cleaning, wipe the glass surface with a soft cloth dampened with warm soapy water. Dry thoroughly with a clean, soft cloth.
  • Genstridige pletter: For burnt-on food or stubborn stains, use a specialized ceramic hob scraper (held at a shallow angle) to gently remove residue, followed by a ceramic hob cleaner.
  • Undgå: Do not use abrasive sponges, scouring pads, harsh chemical cleaners, or steam cleaners, as these can damage the glass surface.
  • Kontrolknapper: The control knobs can usually be pulled off for cleaning. Wash them in warm soapy water, dry, and reattach.

6. Fejlfinding

If you encounter issues with your hob, refer to the following common problems and solutions before contacting customer service.

ProblemMulig årsagLøsning
Kogepladen tænder ikkeNo power supply; Child lock activated; Overheating protectionCheck power connection; Deactivate child lock (if applicable); Allow hob to cool down.
Kogezonen varmer ikke opNon-compatible cookware; Pan not centered; Pan too small/largeUse induction-compatible cookware; Center pan on zone; Use appropriate pan size.
Display shows an error code (e.g., 'E' followed by numbers)Specific internal fault or conditionRefer to the specific error code in a more detailed manual (if available) or contact customer service. Try resetting power.
Usædvanlig støj under driftNormal fan noise; Cookware vibrationA low hum or fan noise is normal. Some cookware may vibrate slightly. This is not a fault.

If the problem persists after attempting these solutions, please contact SCHNEIDER customer support.

7. Specifikationer

FeatureSpecifikation
MærkeSCHNEIDER
ModelSCDI30M
Type kogepladeInduktion
Antal kogezoner2
Samlet effekt3500 watt
KontroltypeKnob controls
Madlavningsniveauer9 pr zone
Booster funktionYes, on both zones
Timer funktionIntegreret
MaterialeGlas
Dimensioner (B x D)28.8 cm x 52 cm
StrømkildeElektrisk kabel

8. Garanti og support

Your SCHNEIDER Domino Induction Hob SCDI30M comes with a manufacturer's commercial warranty of 2 years.

For warranty claims, technical support, or spare parts inquiries, please contact SCHNEIDER customer service. Keep your proof of purchase for warranty validation.

Note: Information regarding the availability of spare parts is not provided in the product details. Please contact SCHNEIDER directly for such inquiries.

Relaterede dokumenter - SCDI30M

Preview Schneider SCDI30M Induktionskogeplade Brugermanual
Omfattende brugermanual til Schneider SCDI30M induktionskogeplade, der dækker sikkerhedsinstruktioner, installation, brug og vedligeholdelse. Lær, hvordan du betjener din induktionskogeplade sikkert og effektivt.
Preview Schneider Aktiv - Ausgabe 3/87: Tests, tip og tricks til Schneider Computer
En umfassender Überblick über die März 1987 Ausgabe von Schneider Aktiv, mit Tests to Spielen wie Aliens!, Software med Sybex Star-Texter og tiefgehenden Artikeln til CP/M, dBase og dem Schneider PC.
Preview Brugermanual til Schneider PC-Super-Angulon 28mm f/2.8 objektiv | Perspektivkorrektion og Shift-fotografering
Omfattende brugermanual til Schneider PC-Super-Angulon 28mm f/2.8 objektivet, der beskriver dets funktioner til perspektivkorrektion, parallelforskydning, stor billedcirkel og tekniske specifikationer. Ideel til arkitektur- og produktfotografering.
Preview Brugervejledning til bærbar computer fra Schneider SCL141CTP
Brugermanual til Schneider SCL141CTP bærbar computer, der beskriver funktioner, opsætning og brug af Intel Quad Core-processoren og Windows 10-operativsystemet.
Preview Schneider modeljernbanesignaler: Hoved- og fjernsignaler type L (H0 1:87)
Detaljeret overview af Schneider Modellbahnzubehörs hoved- og fjernsignaler af type L til modeljernbaner i skala H0 (1:87), der dækker produkttyper, dimensioner, samling, signalbetydninger og sikkerhedsinstruktioner. Indeholder modeller til SBB og Epoche III+.
Preview Schneiders nationale politik for indsamling og opbevaring af biometriske data
Politik, der beskriver Schneider National Carriers, Inc. og Schneider National Bulk Carriers, Inc.'s indsamling, opbevaring, brug og videregivelse af biometriske data indsamlet via Netradynes Driver.i-system.