DEPSTECH 50FT Sewer Inspection Camera User Manual

1. Introduktion

This manual provides detailed instructions for the safe and effective operation of your DEPSTECH 50FT Sewer Inspection Camera. This device is designed for visual inspection in hard-to-reach areas such as pipes, drains, engine compartments, and wall cavities. It features a 1080P dual-lens camera, a 5-inch IPS display, and a 50-foot semi-rigid cable with IP67 waterproofing.

2. Sikkerhedsoplysninger

• Udsæt ikke enheden for ekstreme temperaturer eller direkte sollys.
• Hold enheden væk fra stærke magnetiske felter.
• Ensure the camera probe is securely connected before use.
• Forsøg ikke at skille enheden ad eller ændre den. Reparationer bør kun udføres af autoriseret personale.
• Clean the camera lens and probe after each use to maintain optimal performance.
• The camera probe is IP67 waterproof, but the main unit is not. Avoid exposing the main unit to water.
• Charge the device using the provided Type-C cable and a compatible power adapter (not included).

3. Pakkens indhold

Bekræft at alle varer er til stede i din pakke:

• Handheld Endoscope Inspection Camera (with built-in 32GB TF Card)
• 50FT Semi-Rigid Camera Cable with Dual Lens Probe
• Type-C opladerkabel
• Accessories: Hook, Magnet, Protective Cap
• Brugermanual
• Bæretaske

4. Produktet er slutview

4.1 Main Unit and Display

The main unit features a 5-inch IPS screen for clear, real-time observation. The ergonomic design ensures comfortable handling during extended use.

4.2 Camera Probe and Cable

The device includes a 50-foot semi-rigid cable with a 7.9mm dual-lens camera probe. The probe is IP67 waterproof and equipped with adjustable LED lights for illumination in dark environments.

4.3 Kontrolpanel

The control panel provides intuitive buttons for power, menu navigation, camera mode selection, light adjustment, and media capture.

• Power knap: Tryk og hold for at tænde/slukke enheden.
• Menu/Tilbage knap: Access menu options or go back.
• OK/Afspil knap: Confirm selections or play recorded media.
• Foto/video knap: Short press to take a photo, long press to start/stop video recording.
• Dim Lights/Up Button: Decrease LED brightness or navigate up in menus.
• Brighten Lights/Down Button: Increase LED brightness or navigate down in menus.
• Rotate 180°/Hold Switch Lens: Short press to rotate the image 180 degrees. Long press to switch between front, side, and split-screen camera views.

5. Opsætning

5.1 Opladning af enheden

Before first use, fully charge the device. Connect the Type-C charging cable to the charging port on the main unit and plug the other end into a USB power adapter (5V/1A recommended). The charging status LED indicator will show charging progress.

5.2 Connecting the Camera Probe

Insert the USB connector of the camera cable firmly into the USB port on the top of the main unit. Ensure it clicks into place for a secure connection. The device is designed to prevent accidental disconnection.

5.3 Indsættelse af TF-kortet

The device comes with a built-in 32GB TF card. If you need to replace it, gently insert a new Micro SD card (up to 32GB, Class 10 recommended) into the TF card slot until it clicks.

6. Betjeningsvejledning

6.1 Tænd/sluk

Tryk og hold på Power knap for a few seconds to turn the device on. Repeat the action to turn it off.

6.2 Justering af LED-lys

Brug Dim Lights/Up og Brighten Lights/Down buttons to adjust the brightness of the LED lights on the camera probe. This helps optimize visibility in various lighting conditions.

6.3 Skift kamera Views

The dual-lens camera offers multiple viewvalgmuligheder:

• Forreste kamera: Giver en direkte fremadgående view.
• Sidekamera: Provides a lateral view.
• Opdelt skærm: Viser både forside og side views simultaneously for comprehensive inspection.

Tryk længe på Rotate 180°/Hold Switch Lens button to cycle through these camera modes.

6.4 Optagelse af billeder og videoer

• Sådan tager du et billede: Tryk kort på Foto/video -knap.
• Sådan optager du video: Tryk længe på Foto/video -knap to start recording. Long press again to stop recording.

All captured media is saved to the inserted TF card.

6.5 Dataoverførsel

Sådan overfører du billeder og videoer til en computer:

1. Connect the main unit to your computer using the Type-C charging cable.
2. The device will appear as a removable storage device.
3. Alternatively, remove the TF card and insert it into a card reader connected to your computer.

6.6 Bluart 3.0 Technology

The device incorporates Bluart 3.0 technology, which enhances image clarity, processing speed, and low-light performance, providing a clearer and smoother inspection experience.

7. Vedligeholdelse

7.1 Rengøring

• After each use, wipe the camera lens and probe with a soft, damp klud. Til genstridigt snavs kan en lille mængde mild sæbe bruges.
• Ensure the lens is dry before storage.
• Clean the main unit with a dry, soft cloth. Do not use abrasive cleaners or immerse the main unit in water.

7.2 Opbevaring

• Store the device and its accessories in the provided carrying case to protect them from dust and damage.
• Opbevares på et køligt, tørt sted, væk fra direkte sollys og ekstreme temperaturer.
• Hvis batteriet opbevares i længere tid, skal du sørge for, at det er delvist opladet (ca. 50%) for at forlænge dets levetid.

8. Fejlfinding

• Intet billede på skærmen: Ensure the camera probe is securely connected to the main unit. Check if the device is powered on and fully charged.
• Billedet er sløret: Clean the camera lens. Adjust the LED brightness. Ensure the object is within the camera's focal range (Front Camera: 3-10 cm; Side Camera: 2-5 cm).
• Enheden tænder ikke: Charge the device for at least 30 minutes. If the issue persists, try pressing the reset button (if available, refer to Figure 4.5).
• Kan ikke optage billeder/videoer: Check if the TF card is inserted correctly and has sufficient storage space. Ensure the card is not write-protected.
• Difficulty maneuvering the cable: For longer runs or navigating tight bends, consider attaching the probe to a stiffer guide wire or pipe snake (not included) for better control.

9. Specifikationer

10. Garanti og support

DEPSTECH products are designed for reliability and performance. For warranty information, technical support, or service inquiries, please refer to the contact information provided with your purchase documentation or visit the official DEPSTECH webwebsted. Gem venligst din købsbevis til garantikrav.