Indledning
These Rough Country Power Running Boards are designed to provide convenient and secure vehicle access. The retractable E-Boards remain tucked away when not in use, maintaining a clean vehicle aesthetic, and automatically extend when a door is opened. They feature an anti-slip surface for secure footing and integrated LED lights for illumination during deployment. Constructed from lightweight yet durable aluminum, these 6-inch all-season steps are equipped with dual motor technology and can support up to 660 lbs per side. An automatic 'SAFE-STOP' mechanism engages if an obstruction is detected, and an interior bypass switch allows for manual override.
Hvad er der i æsken
- (2) Electric Running Boards
- (4) Step Brackets/Actuators
- (4) EBoard Lights
- (4) Magnetic Door Triggers
Image: All components included in the Rough Country Power Running Boards kit, including the two running boards, four step brackets/actuators, four LED lights, and four magnetic door triggers, along with wiring and mounting hardware.
Opsætning og installation
Installation of the Rough Country Power Running Boards is designed to be straightforward with no drilling required for most applications. The steps tuck neatly under the rocker panel when not in use, offering a clean, streamlined appearance.
Installation overståetview
The following video provides a detailed guide for installing Rough Country E-Board Electric Power Steps. While the video demonstrates installation on a Chevy GMC, the general process and principles apply to the Ram 1500 model.
Video: Detailed installation guide for Rough Country E-Board Electric Power Steps. This video demonstrates the process on a Chevy GMC, but the steps for mounting, wiring, and connecting components are generally applicable to the Ram 1500 model.
Key Installation Steps
- Forbered køretøj: If your vehicle has existing factory steps, remove them first.
- Monter motorer: Install each motor as far forward and as far back as possible on each side of the vehicle. Ensure they are finger-tight initially.
- Monter kontrolmodul: Secure the control module and its bracket in the middle factory step location. Tighten securely.
- Route Wiring Harness: Lay out the fully integrated plug-and-play harness to identify all connections. Connect the main connectors to the control module. Route the passenger side motor and light wires along the frame. Route the driver side motor and light wires across the frame and to their respective locations.
- Connect Battery Leads: Route the battery connection wires along the frame and up into the engine compartment.
- Installer LED-lys: Clean the installation area thoroughly. Remove the backing from the LED lights and adhere them to the pinch weld, aiming for the middle of each door. Connect the LED lights to the harness.
- Sikker ledningsføring: Use provided cable ties to secure the wiring harness to existing factory harnesses, ensuring it is tucked up and away from heat and moving parts.
- Route Interior Wires: Remove interior panels and pull back carpet to expose the floorboard plug. Drill a small hole (7/16 inch) in the plug, being careful to avoid factory wiring. Route the brown (passenger side trigger), white (driver side trigger), and black (on/off valet switch) wires into the cab.
- Install Valet Switch: Clean the desired mounting location for the on/off valet switch. Attach the switch and plug it into the black wire. Bundle excess wires and tuck them under the dash.
- Install Door Triggers: Remove sill plates and B-pillar covers. Feed the trigger wires through the weather stripping. Use a paint pen to mark the exact alignment point for the magnetic triggers on the door jamb and the door itself. Apply the magnetic triggers, ensuring proper alignment for activation.
- Monter trinbrætter: Slide the aluminum sliders into the block cast on each motor bracket. Position the running boards to be even front to back. Cinch them down with the provided Allen bolts.
- Afsluttende kontrol: Perform a final check to ensure all wiring is zip-tied and secure. Permanently attach the power leads to the battery.
Troubleshooting Magnet Alignment
If the triggers are not working after temporary power connection, it may be due to magnet alignment. Use a regular magnet (such as one on a flashlight) to touch the installed trigger. If the steps deploy, the wiring is functional, and only the magnet's placement needs adjustment. Ensure one door is closed at a time when testing, as the circuit will be broken if the door is open.
Betjeningsvejledning
The Rough Country Power Running Boards are designed for automatic operation. When a vehicle door is opened, the E-Boards will automatically extend, and the integrated LED lights will illuminate. When the door is closed, the steps will retract and the lights will shut off. An interior bypass switch allows for manual override of this automatic function.
Image: A white Ram 1500 truck with the power running boards fully deployed, providing an extended step for easy access. The integrated LED lights are visible, illuminating the step area.
Sikkerhedsfunktioner
- Automatic 'SAFE-STOP': If an obstruction is detected during deployment or retraction, the steps will automatically stop to prevent accidents.
- Interior Bypass Switch: Allows for manual control of the steps, overriding the automatic function when needed.
- Skridsikker overflade: The textured surface of the running boards ensures a secure and stable step, even in wet or icy conditions.
Opretholdelse
To ensure the longevity and optimal performance of your Rough Country Power Running Boards, regular maintenance is recommended:
- Regelmæssig rengøring: Clean the running boards regularly with mild soap and water to remove dirt, mud, and road salt. This helps maintain the anti-slip surface and the powder coat finish.
- Undersøg forbindelser: Periodically check all electrical connections and mounting hardware for tightness. Ensure no wires are pinched or exposed.
- Smøring: While not explicitly stated, it is generally good practice to periodically inspect moving parts of the step mechanism for any signs of wear or to apply a silicone-based lubricant if squeaking or stiffness occurs.
Fejlfinding
If you encounter issues with your power running boards, consider the following:
- Trin uden udfoldelse/tilbagetrækning:
- Check all electrical connections for proper seating and damage.
- Verify that the fuses for the harness are intact.
- Ensure the magnetic door triggers are correctly aligned and functioning (refer to the magnet alignment troubleshooting in the Setup section).
- Check the interior bypass switch to ensure it is not in the 'off' position.
- Steps Making Unusual Noises:
- Inspect the step mechanism for any obstructions or debris.
- Check for loose mounting hardware.
- LED-lys virker ikke:
- Check the wiring connections to the LED lights.
- Ensure the main harness is receiving power.
Specifikationer
- Farve: Sort
- Mærke: Groft land
- Materiale: Legeret stål, aluminium
- Udvendig finish: Pulverlakeret
- Emnemål (L x B x H): 40 x 10 x 10 tommer
- Køretøjsservicetype: Ram 1500, Crew Cab (2009-2018), Truck
- Varens vægt: 90 pund
- Vægtgrænse: 660 Pounds (per side)
- UPC: 840269938467
- Biltilpasningstype: Køretøjsspecifik pasform
- Model: Rough Country LED Power Running Boards for 2009-2018 Ram 1500 | Crew Cab - PSR050205
- Producentens varenummer: PSR050205
- Position: Sænke
- Konstruktion: Boring påkrævet: Nej
Garanti
Rough Country backs its products with a five-year limited warranty. This warranty protects against structural and workmanship damage after purchase, providing peace of mind and ensuring prompt service and replacements if needed.
Sikkerhedsoplysninger
Rough Country recommends that a certified technician install lift systems. Knowledge of Rough Country instructions, suspension procedures, and post-installation checks are required. If a system is installed without the necessary knowledge and expertise, it may impact the integrity and operating safety of the vehicle.
Juridisk ansvarsfraskrivelse
It is ultimately the buyer's responsibility to have all bolts and nuts checked for tightness after the first 500 miles, and then again every 1,000 miles. Wheel alignment, steering system, suspension, and driveline systems must be inspected by a qualified, professional mechanic at least every 3,000 miles.
