Edostory Hot Tub Oppustelig Bærbar Oval Spa Brugermanual

1. Introduktion

Thank you for choosing the Edostory Inflatable Portable Oval Spa. This hot tub is designed to provide a relaxing and comfortable bubble massage experience for 2-3 individuals. Featuring 90 powerful bubble jets, a user-friendly digital control panel, and durable PVC construction, this spa offers convenience and enjoyment. Please read this manual thoroughly before setup and operation to ensure safe and efficient use of your new hot tub.

Figure 1.1: Edostory Inflatable Portable Oval Hot Tub, showcasing its compact design and included side table.

2. Sikkerhedsoplysninger

Din sikkerhed er altafgørende. Følg alle advarsler og instruktioner for at forhindre skader eller skader.

• Temperaturgrænse: Do not use this outdoor spa in temperatures less than 39 °F (4 °C). Operating below this temperature can damage the unit and void the warranty.
• Overvågning: Always supervise children and individuals with health conditions when the hot tub is in use.
• Elektrisk sikkerhed: Ensure the power outlet is properly grounded and protected by a Ground Fault Circuit Interrupter (GFCI). Do not use extension cords.
• Vandkemi: Maintain proper water chemistry to prevent health hazards and damage to the hot tub. Consult a pool or spa professional for guidance.
• Ingen dykning: This is not a diving pool. Do not dive or jump into the hot tub.
• Placering: Place the hot tub on a flat, stable surface capable of supporting the weight of the hot tub filled with water and occupants.
• Kemikaliehåndtering: Handle all chemicals according to manufacturer's instructions. Avoid direct contact with skin and eyes.

3. Pakkens indhold

Bekræft, at alle nedenstående varer er inkluderet i din pakke. Hvis der mangler eller er beskadigede varer, bedes du kontakte kundesupport.

Figure 3.1: All components included in the Edostory Hot Tub package.

• 1x Inflatable Hot Tub
• 2x filterpatroner
• 1x dæksel
• 1x Ground Sheet
• 2x Air Valve Cap
• 2x reparationssæt
• 1x oppustningsslange
• 1x Drainage Bung
• 2x Child Safety Key
• 2x Filter Cover
• 1x Water Inlet / Outlet Spanner
• 1x Brugsanvisning (dette dokument)

4. Opsætning

Setting up your Edostory Hot Tub is a straightforward process thanks to its advanced built-in inflation system.

1. Vælg en placering: Select a flat, level surface free of sharp objects. Ensure the area can support the weight of the filled hot tub (approximately 145 gallons of water plus occupants).
2. Lay Out Ground Sheet: Place the provided ground sheet on your chosen location to protect the bottom of the hot tub.
3. Placering af spabad: Unfold the inflatable hot tub on top of the ground sheet.
4. Oppustning af spabadet:
   

   Figure 4.1: Detailed steps for connecting the inflation hose and initiating inflation.
   • Connect the inflation hose to the air outlet on the hot tub's pump unit.
   • Connect the other end of the inflation hose to the air inlet valve on the hot tub.
   • Plug in the hot tub's power cord.
   • Press the 'Bubble' button on the digital control panel to begin inflation. The hot tub will inflate quickly. Once fully inflated and firm, turn off the bubble function and disconnect the hose.
5. Fyld med vand: Fill the hot tub with water using a garden hose until the water level is between the 'Min' and 'Max' lines indicated inside the tub.
6. Installer filterpatroner: Insert the two filter cartridges into their designated housings inside the hot tub.

5. Betjeningsvejledning

The digital control panel provides easy access to all hot tub functions.

Figur 5.1: Overview af det digitale kontrolpanel og dets funktioner.

• Tænd/sluk: Tryk på tænd/sluk-knappen for at tænde eller slukke for enheden.
• Temperaturkontrol:
  • Brug Temperaturstigning button (up arrow) to raise the desired water temperature up to a maximum of 104 °F (40 °C).
  • Brug Temperatur fald button (down arrow) to lower the desired water temperature down to a minimum of 43 °F (6 °C).
  • The current water temperature is shown on the Temperatur display.
• Varmesystem: Tryk på Varmeapparat button to activate the heating function. The heater will automatically turn off once the set temperature is reached.
• Boblestråler: Tryk på Boble button to activate the 90 bubble jets for a relaxing massage. Press again to turn off.
• Filter Filtration: Tryk på Filter button to activate the water filtration system. This helps keep your water clean and clear. It is recommended to run the filter regularly.

6. Vedligeholdelse

Regelmæssig vedligeholdelse er afgørende for dit spabads levetid og hygiejne.

Water Filtration and Chemistry

Figure 6.1: Water filtration system with filter cartridge installation points.

• Filterpatroner: The hot tub includes two filter cartridges. These should be cleaned regularly (e.g., weekly) and replaced every 1-2 months depending on usage and water quality. Dirty filters can reduce water flow and heating efficiency.
• Vandbehandling: Use appropriate hot tub chemicals (e.g., chlorine, bromine, pH adjusters) to maintain balanced water chemistry. Test the water regularly using test strips.
• Tømning og rengøring: It is recommended to drain and clean the hot tub every 1-3 months. Use the drainage bung to empty the water. Clean the interior with a soft cloth and mild, non-abrasive cleaner. Rinse thoroughly.

Dæk og opbevaring

Figure 6.2: The hot tub cover features secure buckles to keep it in place.

• Hot Tub Cover: Always use the provided cover when the hot tub is not in use. This helps retain heat, keeps debris out, and improves safety. Secure the cover using the child safety keys.
• Vinterisering (hvis relevant): If storing the hot tub for winter or in temperatures below 39 °F (4 °C), ensure it is completely drained, cleaned, and dried. Deflate and store in a dry, protected area.

7. Fejlfinding

This section addresses common issues you might encounter with your Edostory Hot Tub.

8. Specifikationer

Key technical specifications for the Edostory Inflatable Portable Oval Spa.

9. Garanti og support

For specific warranty details and terms, please refer to the warranty card included with your product or contact the seller directly. EDOSTORY is committed to providing excellent customer support.

If you encounter any issues not covered in this manual or require further assistance, please reach out to the customer support team of your retailer or the manufacturer. Keep your purchase receipt as proof of purchase for warranty claims.

For general inquiries or to purchase replacement parts, please visit the official EDOSTORY webwebstedet eller kontakt deres kundeservicelinje.