Dreo Smart Wall Heater with ALCI Plug

1. Vigtige sikkerhedsinstruktioner

Læs og forstå alle sikkerhedsinstruktioner, før du bruger dette apparat. Manglende overholdelse af disse instruktioner kan resultere i elektrisk stød, brand eller alvorlig personskade.

• ALCI Anti-Leakage Plug: This heater is equipped with an ALCI (Appliance Leakage Current Interrupter) plug for enhanced safety. It automatically cuts off power in case of ground fault, reducing the risk of electric shock. Test the ALCI plug monthly as per instructions.
• Overophedningsbeskyttelse: The heater features internal and environmental overheat protection systems to prevent fire hazards. If the unit overheats, it will automatically shut off.
• Air Outlet Self-Correction: An air outlet self-correction system helps prevent malfunctions.
• Placering: Ensure proper clearance around the heater. Do not block air inlets or outlets. Do not operate near water or in excessively damp miljøer.
• Strømforsyning: Connect the heater to a 120V, 12.5A electrical outlet. Do not use extension cords.
• Børn og kæledyr: Keep children and pets away from the heater. Use child lock feature when available.
• Opretholdelse: Always unplug the heater before cleaning or performing any maintenance. Clean with a soft, dry cloth.

2. Produktet er slutview

The Dreo Smart Wall Heater is designed to provide efficient and safe heating for indoor spaces. Its wall-mounted design saves floor space, while smart features offer convenient control.

• Magt: 1500W for rapid heating.
• oscillation: 120° vertical oscillation for widespread warmth.
• Smart kontrol: Compatible with Dreo app, Alexa, and Google Home for voice and remote control.
• Justerbar termostat: Customize temperature settings from 41°F to 95°F.
• 24-timers timer: Schedule heating cycles for convenience.
• Sikkerhedsfunktioner: ALCI plug, internal/environmental overheat protection, air outlet self-correction.

3. Pakkens indhold

• Space Heater Body
• Fjernbetjening
• Accessory Package (for installation)
• Hurtig startvejledning
• Brugermanual

4. Opsætning og installation

4.1 Vægmontering

The Dreo Smart Wall Heater is designed for easy wall mounting. Use the provided drilling guide and accessory package for secure installation. Ensure the mounting location is clear of obstructions and provides adequate ventilation.

Image: Dimensions and installation guide for the Dreo Wall Heater, showing measurements and mounting points.

4.2 Strømtilslutning

Connect the heater's ALCI plug directly into a standard 120V, 12.5A wall outlet. Do not use extension cords or power strips.

Image: The Dreo Wall Heater showing its integrated ALCI safety plug.

4.3 App Setup and WiFi Pairing

To enable smart control, download the Dreo app from your device's app store. Follow the in-app instructions to pair your heater with your mobile device. Ensure Bluetooth is enabled and your heater is plugged in. Hold the Fan Angle button on the heater for 5 seconds to start WiFi connection settings. The WiFi icon will blink during pairing.

4.4 Integration af stemmestyring

The Dreo Smart Wall Heater supports voice control via Amazon Alexa and Google Home. Link your Dreo account within the respective smart home app to enable voice commands for power, mode, speed, temperature, and fan angle adjustments.

5. Betjeningsvejledning

5.1 Kontrolpanel overview

The heater features an intuitive control panel with touch-sensitive buttons and a digital display.

5.2 Tænd/sluk

Tryk på tænd / sluk-knappen (Ⓢ) on the control panel or remote, or use the Dreo app/voice command to turn the heater on or off.

5.3 Heat Settings and ECO Mode

Cycle through heat settings (H1, H2, H3) or ECO mode using the mode button (≡). H1 is 900W, H2 is 1300W, and H3 is 1500W. In ECO mode, the heater maintains a set temperature by cycling on and off.

5.4 Kun blæsertilstand

Select Fan Only mode to circulate air without heating. This can be accessed via the mode button or app.

5.5 Vertical Oscillation

Adjust the vertical oscillation angle (60°, 90°, 120°, or full oscillation) using the oscillation button (↻) on the control panel or remote. This directs heat where desired.

Image: The Dreo Wall Heater demonstrating its 120-degree vertical oscillation feature, distributing heat across a wider area.

5.6 Justerbar termostat

Use the '+' and '-' buttons to set your desired temperature between 41°F and 95°F. The heater will automatically maintain this temperature.

5.7 24-timers timer

Tryk på timerknappen (🕔) to set an auto-off timer from 1 to 24 hours. This allows for scheduled operation.

5.8 Fjernbetjening

Den medfølgende fjernbetjening giver nem adgang til alle varmelegemets funktioner på afstand.

5.9 App-kontrolfunktioner

The Dreo app offers comprehensive control:

• Skærmindstillinger: Adjust display brightness (Auto, On, Off).
• Panel Sound: Mute or unmute button sounds.
• Børnelås: Lock device buttons to prevent unintended operation.
• Registrering af åbent vindue: Receive notifications if ambient temperature drops rapidly while the device is running.
• Ambient Temp Always On: Choose to always display ambient temperature.
• Temperaturenhed: Skift mellem Fahrenheit og Celsius.
• Ambient Temp Calibration: Calibrate the temperature sensor for accuracy.
• Tidsplaner: Set up custom heating schedules for timed on/off or specific periods.

6. Vedligeholdelse

Regelmæssig vedligeholdelse sikrer optimal ydeevne og levetid for din varmeovn.

• Rensning: Always unplug the heater before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use abrasive cleaners or immerse the heater in water.
• Filter: The heater may include a detachable filter. Refer to the full user manual for instructions on cleaning or replacing the filter to maintain air quality and heating efficiency.

7. Fejlfinding

If you encounter issues with your Dreo Smart Wall Heater, refer to the following common solutions:

• Varmeapparat tænder ikke:
  • Ensure the ALCI plug is fully inserted into a working outlet and the reset button on the plug is pressed.
  • Kontroller om stikkontakten fungerer ved at tilslutte en anden enhed.
  • Verify the power button on the heater or remote is pressed.
• Ingen varmeeffekt:
  • Confirm the heater is in a heat mode (H1, H2, or H3) and not Fan Only mode.
  • Check if the set temperature is higher than the ambient room temperature.
  • Sørg for, at luftindtag og -udtag ikke er blokeret.
• Problemer med appforbindelse:
  • Sørg for, at din mobilenheds Bluetooth er aktiveret.
  • Verify your WiFi network is 2.4GHz (5GHz networks are not supported).
  • Restart connection settings by holding the Fan Angle button for 5 seconds.
  • To unpair WiFi and restore factory settings, long press the power button for 10 seconds.
• Unøjagtig temperaturaflæsning:
  • Ensure the heater's temperature sensor is not obstructed or exposed to direct heat sources.
  • Use the Ambient Temp Calibration feature in the Dreo app to adjust the reading if necessary.

8. Specifikationer

9. Garanti og support

Dreo provides a limited warranty for this product. For detailed warranty information, product registration, or technical support, please refer to the official Dreo webwebsted eller kontakt kundeservice.

• Online support: Besøg Dreo Official Store
• Kundeservice: Se din produktemballage eller den officielle Dreo-manual. webwebsted for kontaktoplysninger.