1. Introduktion
This manual provides essential information for the safe and effective operation of your HTVRONT Auto Tumbler Heat Press Machine. Designed for sublimation printing, this machine automatically applies ideal pressure for various drinkware, ensuring efficient and high-quality results. Please read these instructions thoroughly before use.
Image: HTVRONT Auto Tumbler Heat Press Machine, showcasing dets kompakte design og det medfølgende tilbehør.
2. Sikkerhedsoplysninger
- Automatisk slukning: The machine powers down after 15 minutes of inactivity to prevent overheating and conserve energy.
- Nødstop: Press the 'R' button to instantly halt heating and release the heat pad, ensuring user safety and preventing burns.
- Varmebestandige handsker: Always use the provided heat-resistant gloves when handling hot items or the heat press components.
- Ventilation: Betjen maskinen i et godt ventileret område.
- Overflade: Place the heat press on a stable, heat-resistant surface.
- Rør ikke ved varme overflader: Avoid direct contact with the heating element during and immediately after operation.
- Voltage: Ensure the machine is connected to a 120V power outlet.
3. Hvad er inkluderet
- Auto Tumbler Heat Press x1
- Heat-resistant Gloves x1 pair
- Heat-resistant Tape x1 roll
- Brugsanvisning x1
Image: The complete package contents of the HTVRONT Auto Tumbler Heat Press Machine.
4. Specifikationer
| Feature | Værdi |
|---|---|
| Anbefalede anvendelser | Sublimation printing on drinkware (tumblers, mugs, water bottles, sippy cups) |
| Øverste temperaturvurdering | 390°F (200°C) |
| Voltage | 120 volt |
| Wattage | 600 watt |
| Produktdimensioner | 32.7 cm L x 27.7 cm B x 16 cm H (12.9" L x 10.9" B x 6.3" H) |
| Varens vægt | 10.65 pund (4.84 kg) |
| Compatible Tumbler Diameter | 2.95 tommer (7.5 cm) til 3.18 tommer (8.1 cm) |
| Compatible Tumbler Volume | 280ml - 850ml (11-30oz) |
| Materiale | ABS skal |
Image: Visual guide for compatible tumbler dimensions and sizes.
5. Opsætning
- Pakker ud: Fjern forsigtigt alle komponenter fra emballagen. Gem emballagen til senere opbevaring eller transport.
- Placering: Position the heat press on a flat, stable, and heat-resistant surface in a well-ventilated area.
- Strømtilslutning: Connect the power cord to the machine's inlet and then to a standard 120V, 60Hz electrical outlet.
- Første gang tændt: Flip the power switch located at the back of the machine to the 'ON' position. The digital display will illuminate.
6. Betjeningsvejledning
6.1. Preparing Your Item
- Ensure your tumbler's diameter is between 2.95 and 3.18 inches.
- Wrap your sublimation design tightly around the tumbler and secure it with heat-resistant tape.
6.2. Indstilling af temperatur og tid
- Use the 'Mode' button to cycle through preset temperature and time settings, or manually adjust using the '+' and '-' buttons for temperature and time.
- Refer to the Quick Reference Chart below for recommended settings based on material.
6.3. Pressing Cycle
- Once settings are confirmed, carefully slide the prepared tumbler into the heating chamber. The machine will automatically detect the tumbler and apply appropriate pressure.
- Press the 'Enter' button to begin the heating cycle. The machine will automatically heat and press the design.
- The digital display will show the countdown.
6.4. Removing the Tumbler
- Upon completion of the cycle, the machine will automatically release the pressure and open.
- Wearing heat-resistant gloves, carefully remove the hot tumbler from the machine.
- Allow the tumbler to cool completely before removing the sublimation paper and tape.
Image: Control panel showing temperature and time settings.
6.5. Quick Reference Chart
| Grundmaterialer | Tid | Temperatur |
|---|---|---|
| Tumler i rustfrit stål | 130±20s | 370°F±10°F |
| Keramisk tumbler | 400±20s | 385°F±10°F |
| Glas tumbler | 300±20s | 370°F±10°F |
Note: These are general guidelines. Optimal settings may vary based on specific materials and sublimation paper.
7. Vedligeholdelse
- Rensning: Always unplug the machine and allow it to cool completely before cleaning. Wipe the exterior with a soft, damp klud. Brug ikke slibende rengøringsmidler, og nedsænk ikke maskinen i vand.
- Opbevaring: Opbevar varmepressen et tørt og støvfrit miljø, når den ikke er i brug.
8. Fejlfinding
- Uneven Heating/Ghosting: Ensure the sublimation paper is tightly wrapped around the tumbler with no gaps or wrinkles. Verify the tumbler diameter is within the recommended range (2.95-3.18 inches) for optimal pressure application.
- Tumbler Difficult to Remove: This may occur with mugs slightly larger than the recommended diameter. Ensure you are using heat-resistant gloves and carefully extract the item. Avoid forcing the tumbler.
- Maskinen tænder ikke: Check that the power cord is securely plugged into both the machine and a functioning 120V outlet. Ensure the power switch is in the 'ON' position.
- Auto-off funktion: If the machine powers off unexpectedly, it may be due to 15 minutes of inactivity. Simply turn it back on.
9. Garanti og support
HTVRONT is committed to providing excellent customer service. Should any issues arise with your Auto Tumbler Heat Press Machine, please contact HTVRONT customer support for assistance. They will work to provide a solution to ensure your satisfaction.
For support, please refer to the contact information provided in your product packaging or visit the official HTVRONT webwebsted.
