Behringer Solina String Ensemble Analog Synthesizer Module User Manual

Indledning

The Behringer Solina String Ensemble is an all-analog synthesizer module designed to faithfully recreate the classic string sounds of the 1970s. This module offers a rich sonic array with six instrument presets, a multi-stage bucket brigade device ensemble chorus, and a Small Stone-style phase shifter. Its flexible design includes expanded I/O for versatile integration into various setups, including Eurorack systems. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your Solina String Ensemble module.

Image: Front panel of the Behringer Solina String Ensemble Analog Synthesizer Module, showing all controls and connections. From left to right, top row: MIDI In, Trig Out, Gate Out, Mod In, Mod Out, Phaser In, Phaser Out, VCA CV In, Audio Out/Phones. Middle row: Tune knob, red buttons for Contrabass, Cello, Viola, Violin, Trumpet, Horn, Modulation, Phaser, Color switch, Rate knob, Power indicator. Bottom row: Sliders for Volume Bass, Crescendo, Sustain Length, and Volume.

Opsætning

Before operating your Solina String Ensemble, ensure proper connections are made. The module is designed for desktop use or integration into a Eurorack system.

Strømtilslutning

• Connect the included DC power supply to the "DC IN" port on the rear of the module.
• Plug the power supply into a suitable electrical outlet. The "POWER" indicator on the front panel will illuminate when power is supplied.

Lydforbindelser

• Audio Out/Phones: Connect headphones or an audio cable from this 3.5mm jack to your mixer, audio interface, or amplifier til lydoutput.

MIDI-forbindelser

• MIDI i: Use a standard 5-pin MIDI cable to connect your MIDI controller or sequencer to this port for note and control data input.
• MIDI gennem: This port passes through the incoming MIDI data, allowing you to daisy-chain other MIDI devices.

Kontrol Voltage (CV) Connections

• Trig Out: Outputs a trigger signal.
• Port ud: Outputs a gate signal.
• Mod In/Out: Modulation input and output jacks for external modulation sources.
• Phaser In/Out: Input and output jacks for the internal phaser effect, allowing external processing or routing.
• VCA CV In: Voltage Kontrol Amplifier Control Voltage input for dynamic control over the VCA.

Eurorack Integration

The Solina String Ensemble module features a removable housing, allowing it to be integrated into a Eurorack modular synthesizer system. Refer to the Eurorack mounting instructions provided with your Eurorack case for proper installation.

Operating the Solina String Ensemble

This section details the functions of the front panel controls and how to use them to create and shape sounds.

Kontrol på frontpanelet

• TUNE Knop: Adjusts the overall pitch of the synthesizer. Rotate clockwise to increase pitch, counter-clockwise to decrease.
• Instrument Presets (Contrabass, Cello, Viola, Violin, Trumpet, Horn): These red buttons activate the corresponding instrument voices. Multiple voices can be active simultaneously to create rich ensemble sounds. An illuminated LED above each button indicates its active status.
• GRADUERING Knap: Engages or disengages the internal modulation effect.
• FASER Knap: Activates or deactivates the built-in phase shifter effect.
• FARVE Skifte: Modifies the tonal character of the ensemble effect. Experiment with both positions to find the desired timbre.
• SATS Knop: Controls the speed of the internal modulation and phaser effects. Turn clockwise for faster rates.
• MAGT Indikator: A red LED that illuminates when the unit is receiving power.
• LYDSTYRKE BAS Skyder: Adjusts the volume level of the bass section of the ensemble.
• CRESCENDO Skyder: Controls the attack time of the notes. Moving the slider up increases the time it takes for notes to reach full volume, creating a "crescendo" effect.
• OPHOLD LÆNGDE Skyder: Determines how long notes are sustained after the key is released. Moving the slider up increases the sustain time.
• BIND Skyder: Controls the overall output volume of the Solina String Ensemble.

Basic Sound Creation

1. Ensure the module is powered on and connected to an audio output.
2. Connect a MIDI controller to the MIDI In port.
3. Indstil BIND slider to a moderate level.
4. Press one or more of the instrument preset buttons (e.g., VIOLIN, CELLO).
5. Play notes on your MIDI controller.
6. Eksperimenter med CRESCENDO og OPHOLD LÆNGDE sliders to shape the envelope of the sound.
7. Engager GRADUERING og FASER effects and adjust the SATS knob to add movement and texture.
8. Juster TUNE knob for fine pitch adjustments.

Opretholdelse

Proper care will ensure the longevity and optimal performance of your Solina String Ensemble.

Rensning

• Afbryd altid strømmen før rengøring.
• Use a soft, dry cloth to wipe down the exterior of the module.
• Til genstridigt snavs, en let damp en klud med mild sæbe kan bruges, efterfulgt af en tør klud. Undgå slibende rengøringsmidler eller opløsningsmidler.
• Do not allow liquids to enter the module through openings or controls.

Opbevaring

• Opbevar modulet et køligt, tørt sted væk fra direkte sollys, ekstreme temperaturer og høj luftfugtighed.
• If storing for extended periods, consider using a dust cover to protect the controls and jacks.

Fejlfinding

If you encounter issues with your Solina String Ensemble, refer to the following common problems and solutions.

If the problem persists after trying these solutions, please contact Behringer customer support or visit their official webwebsted for yderligere hjælp.

Specifikationer

Garanti og support

For detaljerede garantioplysninger og teknisk support henvises til den officielle Behringer-brochure. website or contact their customer service department. Warranty terms and conditions may vary by region and retailer.

Du kan typisk finde supportressourcer, ofte stillede spørgsmål og kontaktoplysninger på Behringer Officiel Webwebsted.