GLADEN HTL 10 Højtydende Høj/Lav Konverter Brugermanual

1. Introduktion

The GLADEN HTL 10 is a high-performance high/low converter designed to integrate aftermarket amplifiers into car audio systems that lack dedicated line-level outputs. This device converts high-level (speaker-level) audio signals from your vehicle's head unit or factory amplifier into low-level (RCA) signals suitable for an external amplifier. It features galvanic separation to prevent ground loops and RF interference, ensuring a clean audio signal. Additionally, it can generate a remote turn-on signal via BTL detection or an external signal, simplifying ampinstallation af lifter.

2. Sikkerhedsoplysninger

• Professionel installation anbefales: Installation of this device requires knowledge of automotive electrical systems. If you are unsure, consult a qualified professional.
• Afbryd strømmen: Frakobl altid køretøjets batteri, før du udfører elektrisk arbejde, for at forhindre kortslutninger og skader.
• Korrekt ledningsføring: Ensure all connections are secure and correctly insulated to avoid electrical hazards and signal loss.
• Undgå fugt: Udsæt ikke enheden for vand eller overdreven fugt.
• Driftstemperatur: Ensure the device is installed in an area with adequate ventilation and within typical automotive operating temperatures.

3. Pakkens indhold

• 1 x GLADEN HTL 10 High Performance High/Low Converter

4. Produktet er slutview

The GLADEN HTL 10 features a compact design with clearly labeled connections for ease of installation.

This image displays the GLADEN HTL 10 High-to-Line Level Converter. On one side, it features a multi-pin connector for speaker input and power, along with a small switch. The opposite side shows two RCA output jacks, labeled 'L' and 'R' for left and right audio channels. The device is black with 'GLADEN HTL 10' and 'HIGH-TO LINE-LEVEL CONVERTER' printed on its surface.

Nøglekomponenter:

• Speaker Input + Power Connector: A multi-pin connector for connecting the high-level speaker signals from the source unit and providing power to the converter.
• RCA L/R-udgang: Two RCA jacks (Left and Right) that provide the converted low-level audio signal to your aftermarket amplivligere.
• Remote Generation Switch/Feature: Allows for automatic remote turn-on of an amplifier via BTL (Bridge-Tied Load) detection from the speaker signal or an external remote signal.

5. Opsætning

Follow these steps for proper installation of your GLADEN HTL 10 converter:

1. Afbryd batteriet: Before starting, disconnect the negative terminal of your vehicle's battery.
2. Identificér højttalerledninger: Locate the speaker output wires from your vehicle's head unit or factory amplifier. Identify the positive and negative wires for the channels you intend to use (e.g., front left, front right).
3. Connect Speaker Inputs: Connect the identified speaker wires to the corresponding inputs on the GLADEN HTL 10's Speaker Input + Power connector. Ensure correct polarity.
4. Tilslut strøm: Provide a fused 12V constant power connection and a ground connection to the appropriate pins on the Speaker Input + Power connector. Refer to the wiring diagram provided with the product for specific pin assignments.
5. Tilslut RCA-udgange: Connect standard RCA cables from the HTL 10's L/R Output jacks to the RCA inputs of your aftermarket amplivligere.
6. Remote Turn-On (Optional):
   • BTL Detection: The HTL 10 can automatically generate a remote turn-on signal when it detects an audio signal on its speaker inputs. Connect the remote output wire from the HTL 10 to your ampliferens fjerntændingsindgang.
   • External Remote: If preferred, you can use an external 12V remote signal to trigger the HTL 10's remote output. Connect this external signal to the designated remote input on the HTL 10's connector.
7. Sikker montering: Mount the GLADEN HTL 10 securely in a dry, accessible location, away from excessive heat or moving parts.
8. Gentilslut batteri: Once all connections are made and verified, reconnect the vehicle's battery.

6. Betjening

The GLADEN HTL 10 operates automatically once correctly installed and powered. When the vehicle's audio system is turned on, the converter will detect the high-level audio signal, convert it to a low-level RCA signal, and, if configured, activate the remote turn-on output for your amplifier. No further user interaction is typically required for its basic function.

7. Vedligeholdelse

The GLADEN HTL 10 is designed for reliable, maintenance-free operation. To ensure its longevity:

• Hold enheden ren og fri for støv og snavs. Brug en blød, tør klud til rengøring.
• Kontrollér regelmæssigt alle ledningsforbindelser for at sikre, at de forbliver fastgjorte.
• Undgå at udsætte enheden for ekstreme temperaturer eller direkte sollys i længere perioder.
• Forsøg ikke at åbne casing, as this may void the warranty and could damage internal components.

8. Fejlfinding

Ingen lyd fra Amplivligere:

• Tjek strøm: Ensure the HTL 10 is receiving proper 12V power and ground connections.
• Verify Speaker Inputs: Confirm that the high-level speaker inputs are correctly connected to the HTL 10 and that the source unit is producing sound.
• RCA-forbindelser: Check that the RCA cables are securely connected between the HTL 10 and the amplivligere.
• AmpLifier fjernbetjening: Sørg for amplifier is turning on. Verify the remote turn-on signal from the HTL 10 is reaching the amplivligere.

Noise or Hum in Audio:

• Jording: Ensure all ground connections for the HTL 10 and the amplifier are solid and free from corrosion.
• Galvanic Separation: The HTL 10's galvanic separation feature is designed to prevent ground loops. If noise persists, re-check all wiring for proper insulation and routing away from power cables.
• Interferens: Ensure RCA cables are not routed parallel to power cables, which can induce noise.

9. Specifikationer

10. Garanti og support

For warranty information and technical support, please refer to the documentation provided with your purchase or contact your authorized Gladen dealer or the manufacturer directly. Keep your proof of purchase for warranty claims.