ALLIMITY SX RCU 03 Remote Control Instruction Manual

1. Introduktion

This manual provides instructions for the ALLIMITY SX RCU 03 replacement remote control. This remote is designed to function with various Octagon SX Series receivers without requiring complex programming. Please read this manual carefully to ensure proper use and to maximize the functionality of your remote control.

Kompatible modeller:

• Octagon SX88, SX88+, SX88+ SE S2, SX88+ SE WL S2, SX88+ SE C/T2, SX88+ SE WL C/T2
• Octagon SX87 S2, SX87WL S2
• Octagon SX89 S2, SX89 WL
• Octagon SX887, SX887 WL, SX888, SX889, SX889WL
• Octagon SX88 Optima, SX88 Optima combo
• Octagon SF8008

2. Opsætning

2.1 Batteriinstallation

The ALLIMITY SX RCU 03 remote control requires two AAA batteries (not included) for operation.

1. Find batterirummets dæksel på bagsiden af ​​fjernbetjeningen.
2. Tryk ned på tappen, og skub dækslet af.
3. Isæt to AAA-batterier, og sørg for, at de positive (+) og negative (-) poler er justeret korrekt med markeringerne inde i batterirummet.
4. Skub batteridækslet tilbage på plads, indtil det klikker sikkert.

The remote is ready for use immediately after battery installation for compatible Octagon SX Series receivers.

Billede 1: Forside view of the ALLIMITY SX RCU 03 remote control, showing all buttons and layout.

3. Betjening af fjernbetjeningen

The ALLIMITY SX RCU 03 remote control is designed to replicate the functions of your original Octagon SX Series remote. No programming is required for basic receiver functions; simply insert batteries and point the remote at your receiver.

3.1 Knapfunktioner ovenforview

The remote features standard buttons for TV control and receiver functions. Refer to Image 1 for button layout.

• Tænd/sluk (rød knap): Tænder eller slukker for modtageren.
• TV Control Section (Blue Buttons): VOL-, VOL+, SET, TV/AV. These buttons are typically used for basic TV functions and may require the learning function for full compatibility with your television.
• Nummerknapper (0-9): Til direkte kanalvalg.
• Navigation Cluster (OK, Arrows): Bruges til at navigere i menuer og bekræfte valg.
• Menu: Accesses the main menu of the receiver.
• Udgang: Afslutter den aktuelle menu eller skærm.
• VOL+/VOL-: Adjusts receiver volume.
• CH+/CH- (Page+/Page-): Changes channels or navigates pages.
• F1, F2, F3, F4 (Color Buttons): Function buttons, their specific use depends on the receiver's software or current menu.
• Mediekontrolknapper (Afspil, Pause, Stop, Spol tilbage, Spol frem, Spring over): Til styring af medieafspilning.
• Dedicated App Buttons (NETFLIX, KODI, YuTbe, WEBTV): Direct access to these applications if supported by your receiver.
• Andre knapper: INFO, AUDIO, SUBTITLE, TEXT, OPTION, IPTV, RECALL, SAT, TV/RADIO, V.FORMAT, RESOLUTION, SLEEP. These buttons provide access to various receiver features.

4. Learning Function (for TV Control)

The ALLIMITY SX RCU 03 remote control includes a learning function to program basic TV control buttons (Power, Volume, TV/AV) from your original TV remote. This allows you to control both your receiver and basic TV functions with a single remote.

Billede 2: Bagside view of the remote control, displaying the "Learning Procedure" instructions.

Learning Procedure:

1. Press and hold the "SET" key for 3 seconds until the red light illuminates brightly.
2. Press the "POWER" key in the TV CONTROL area. The red light will flash slowly.
3. Keep your original TV remote's IR emitter facing the ALLIMITY remote's IR emitter (within 3cm distance). Press the "POWER" key on your TV remote 3 times. The red light will flash 3 times and then remain lit, indicating successful learning.
4. To learn other keys (e.g., VOL+, VOL-, TV/AV), repeat steps 2 and 3 for each desired key.
5. Press the "SET" key again to exit the learning status. The red light will turn off.

If the learning process fails, the red light may flash rapidly or turn off without flashing three times. In such cases, repeat the procedure from step 1.

5. Vedligeholdelse

5.1 Rengøring

To clean the remote control, use a soft, dry cloth. Do not use abrasive cleaners, solvents, or wet cloths, as these can damage the surface or internal components.

5.2 Udskiftning af batteri

Udskift batterierne, når fjernbetjeningen reagerer langsomt eller holder op med at virke. Udskift altid begge batterier samtidig med nye AAA-batterier. Bland ikke gamle og nye batterier eller forskellige typer batterier.

5.3 Opbevaring

Store the remote control in a dry place, away from direct sunlight and extreme temperatures. If the remote will not be used for an extended period, it is recommended to remove the batteries to prevent leakage.

6. Fejlfinding

• Fjernbetjeningen svarer ikke:
  • Kontroller, om batterierne er isat korrekt med den rigtige polaritet.
  • Udskift gamle batterier med nye.
  • Sørg for, at der ikke er nogen forhindringer mellem fjernbetjeningen og receiverens IR-sensor.
  • Make sure you are within the operating range (up to 10 meters).
• TV control buttons not working after learning:
  • Repeat the learning procedure carefully, ensuring the IR emitters are closely aligned and the original remote's button is pressed firmly.
  • Ensure your original TV remote is functioning correctly during the learning process.
• Some receiver functions not working:
  • Verify that your receiver model is listed as compatible in the introduction section.
  • Ensure the receiver is powered on and functioning correctly.

7. Specifikationer

8. Garanti og support

Information regarding specific warranty terms and customer support for the ALLIMITY SX RCU 03 remote control is not available in this manual. Please refer to the product packaging or contact your retailer for details on warranty coverage and support options.