1. Produktet er slutview
The OMTech CW-3000 Industrial Water Chiller is an essential cooling system designed for 40W K40 CO2 laser engraving and cutting machines. This unit efficiently radiates heat away from your laser tube, maintaining optimal operating temperatures without using a refrigeration compressor. Its design focuses on energy efficiency and reliable performance, ensuring the longevity and precision of your laser equipment.
Figur 1: Forside view of the OMTech CW-3000 Industrial Water Chiller, showing the digital display and control panel.
Key features include a 2.4-gallon (9L) enclosed water tank to minimize evaporation, high-grade brass inlet and outlet ports for leak-free operation, and internal sensors with a digital display for real-time monitoring and alarm functions.
2. Opsætning og installation
2.1 Udpakning og inspektion
Carefully remove the chiller from its packaging. Inspect the unit for any signs of damage during transit. Report any damage to your supplier immediately.
2.2 Placering
Place the chiller on a stable, level surface in a well-ventilated area. Ensure there is adequate space around the unit for proper airflow, especially around the fan vents.
2.3 Påfyldning af vandtanken
The chiller has a 2.4-gallon (9L) water tank. Use distilled or deionized water for optimal performance and to prevent mineral buildup. Do not use tap water. Fill the tank through the inlet port until the water level reaches the 'Normal' range on the water level gauge.
Figure 2: Illustration of the 9L water tank, indicating the fill level.
2.4 Connecting to Your Laser Machine
Connect the chiller's water inlet and outlet ports to your laser machine's cooling ports using appropriate tubing. The chiller's inlet port should connect to the laser's water outlet, and the chiller's outlet port should connect to the laser's water inlet. Ensure all connections are secure to prevent leaks.
Figur 3: Bagside view of the chiller, highlighting the brass inlet and outlet ports for water circulation.
Figur 4: Detaljeret view of the water inlet and outlet ports, designed for secure connections.
2.5 Strømtilslutning
Connect the chiller's power cord to a suitable electrical outlet. Ensure the voltage matches the chiller's requirements.
3. Betjening
3.1 Tænd
Flip the power switch to the 'ON' position. The chiller will begin circulating water and the digital display will show the current water temperature in Celsius.
Figure 5: The digital display provides real-time water temperature readings.
Figure 6: The digital display and indicator lights provide operational status at a glance.
3.2 Overvågning af ydeevne
The CW-3000 uses powerful fans to radiate 50W of heat for every 1°C rise in water temperature. Monitor the digital display to ensure the water temperature remains within acceptable limits for your laser machine. The 'Normal' indicator light (green) will be illuminated during normal operation, while the 'Alarm' indicator light (red) will activate if an issue is detected.
Figure 7: The internal cooling fan efficiently dissipates heat from the water.
Figure 8: Visual representation of the powerful cooling fans at work.
3.3 Alarmfunktioner
The chiller is equipped with internal sensors that trigger an alarm for conditions such as low water flow or high water temperature. If the alarm sounds, refer to the troubleshooting section to identify and resolve the issue.
4. Vedligeholdelse
4.1 Water Level Check and Refill
Regularly check the water level using the observation window. If the level is low, refill with distilled or deionized water. The enclosed tank design reduces evaporation, but periodic top-offs are necessary.
4.2 Water Replacement
It is recommended to replace the water in the tank every 1-3 months, depending on usage and water quality. To drain the water, use the quick drainage port located at the bottom of the unit.
Figure 9: The quick drainage port allows for easy removal of water for maintenance.
4.3 Rengøring
Keep the exterior of the chiller clean and free of dust. Periodically clean the fan vents to ensure unrestricted airflow, which is crucial for efficient heat dissipation.
Figure 10: For best results, consider using OMTech Laser Coolant.
5. Fejlfinding
5.1 Alarm Sounds / Red Indicator Light
- Lav vandstand: Check the water level gauge. If low, add distilled or deionized water until it reaches the 'Normal' range.
- Ingen vandgennemstrømning: Ensure the water pump is operating. Check for kinks or blockages in the water tubing. Verify connections are secure.
- High Water Temperature: Ensure the chiller is in a well-ventilated area and the fan vents are not obstructed. If the ambient temperature is very high, the chiller's cooling capacity may be exceeded. Allow the unit to cool down.
5.2 Ingen strøm
- Check the power cord connection to both the chiller and the electrical outlet.
- Verify the electrical outlet is functioning.
- Check the fuse located near the power socket on the chiller. Replace if blown.
5.3 Utætheder
- Tighten all water tube connections at both the chiller and the laser machine.
- Inspect tubing for cracks or damage and replace if necessary.
6. Specifikationer
Figure 11: Dimensions of the CW-3000 Water Chiller: 19"D x 11"W x 15"H.
| Specifikation | Værdi |
|---|---|
| Model | CW-3000 (LCW-3000-US) |
| Materiale | Metal, ABS, Copper |
| Nettovægt | 20.9 lb. (9.5 kg) |
| Tank kapacitet | 2.4 gal. (9 liter) |
| Maks. Strømningshastighed | 2.6 gal./min. (10 l/min.) |
| Kølekapacitet | 50W/°C |
| Produktmål (L x B x H) | 19" D x 11" B x 15" H |
| Wattage | 40 watt |
| Beskyttelse | Low Water Flow, High Water Temperature |
7. Garanti og support
OMTech provides a strong warranty and friendly 24/7 customer service for this product. If you encounter any issues or have questions regarding the OMTech CW-3000 Industrial Water Chiller, please contact OMTech customer support for assistance. Your satisfaction is guaranteed.
