GoSports 54 Inch Air Hockey Arcade Table User Manual

1. Introduktion

Thank you for choosing the GoSports 54 Inch Air Hockey Arcade Table. This manual provides essential information for the safe assembly, operation, maintenance, and troubleshooting of your new air hockey table. Please read this manual thoroughly before use and retain it for future reference.

1.1 Pakkens indhold

Verify that all components listed below are present in your package. If any items are missing or damaged, please contact GoSports customer support.

• GoSports 54 Inch Air Hockey Table
• 2 Pushers
• 3 Pucks
• AC Adapter (for motor and scoreboard)
• Elektronisk resultattavle
• Monteringshardware
• Instruktionsmanual

Image 1.1: The GoSports 54 Inch Air Hockey Arcade Table with included accessories.

2. Sikkerhedsoplysninger

Overhold venligst følgende sikkerhedsforanstaltninger for at forhindre personskade eller beskadigelse af produktet:

• Hold små dele væk fra børn for at undgå kvælningsfare.
• Ensure the table is placed on a level, stable surface to prevent tipping.
• Brug kun den medfølgende AC-adapter.
• Do not expose the table to excessive moisture or direct sunlight.
• Voksenopsyn anbefales til yngre spillere.
• Do not attempt to modify or disassemble the AC motor or electronic components.
• Hold hænder og fingre væk fra bevægelige dele under drift.

3. Opsætning og montering

The GoSports 54 Inch Air Hockey Table comes largely pre-assembled. Follow these steps to complete the setup:

3.1 Fastgørelse af benene

1. Carefully unbox the air hockey table and place the main table body upside down on a soft, protected surface to prevent scratches.
2. Identify the four leg pieces and the corresponding attachment points on the underside of the table.
3. Align each leg with its designated corner and secure it using the provided hardware (screws, washers, nuts) as per the included assembly diagram. Ensure all connections are tight.
4. Attach the leg levelers to the bottom of each leg. Adjust them later to ensure the table is perfectly level.

3.2 Attaching the Goals

5. Locate the two goal assemblies.
6. Attach each goal to its respective end of the table using the provided screws.

3.3 Tilslutning af AC-adapteren

7. Once the table is fully assembled and upright, locate the AC adapter port, typically on the underside or side of the table.
8. Plug the AC adapter into the port and then into a standard electrical outlet. This powers the air blower and the electronic scoreboard.

Image 3.1: Illustration of the table's underside, indicating leg assembly points.

4. Betjeningsvejledning

4.1 Tænd/sluk

• After connecting the AC adapter, the air blower will automatically activate, creating a cushion of air for smooth puck movement.
• The electronic scoreboard will also power on.
• To turn off the table, simply unplug the AC adapter from the wall outlet.

4.2 Using the Electronic Scoreboard

The electronic scoreboard tracks scores for two players. It typically features:

• TIL/FRA/NULSTIL-knap: Press to turn the scoreboard on or off. Hold to reset scores to zero.
• Score Sensors: Located in each goal, these sensors automatically detect when a puck enters and update the score.
• Batterirum: The scoreboard may require AAA batteries for its display, even if the main air blower is AC powered. (Check product specifications for battery requirements).

Image 4.1: The electronic scoreboard with score tracking for two players.

4.3 Spiloplevelse

1. Each player stands at one end of the table, holding a pusher.
2. Place a puck in the center of the playing surface.
3. Players use their pushers to strike the puck, attempting to score by sending it into the opponent's goal.
4. The air blower ensures the puck glides smoothly across the surface.
5. The electronic scoreboard will automatically track goals.
6. The game typically ends when one player reaches a predetermined score (e.g., 7 goals).

Image 4.2: The AC powered air blower creates a smooth playing surface for the puck.

5. Vedligeholdelse

Proper maintenance will extend the life of your air hockey table:

• Rensning: Regularly wipe the playing surface with a soft, damp cloth. Avoid abrasive cleaners or solvents. Ensure the surface is dry before playing.
• Støvning: Dust the air holes on the playing surface periodically to ensure optimal airflow. A soft brush or compressed air can be used carefully.
• Opbevaring: When not in use, store the table in a dry, cool place away from direct sunlight and extreme temperatures.
• Puck and Pusher Care: Keep pucks and pushers clean. Replace worn or damaged items as needed.
• Benudliggere: Periodically check and adjust the leg levelers to maintain a perfectly level playing surface.

6. Fejlfinding

Se tabellen nedenfor for almindelige problemer og løsninger på disse:

7. Specifikationer

8. Garanti og kundesupport

GoSports products are manufactured with quality and durability in mind. For specific warranty details, please refer to the warranty card included with your product or visit the official GoSports webwebsted.

8.1 Kontaktoplysninger

If you have any questions, require assistance with assembly, or need to report missing/damaged parts, please contact GoSports customer support:

• Webwebsted: www.gosports.com
• E-mail: support@gosports.com
• Telefon: Refer to the GoSports webwebsted for regionale kontaktnumre.