Yaheetech Full Upholstered Platform Bed Instruction Manual

1. Introduktion

Thank you for choosing the Yaheetech Full Upholstered Platform Bed. This manual provides detailed instructions for the safe assembly, operation, and maintenance of your new bed frame. Please read all instructions carefully before beginning assembly and retain this manual for future reference.

Figure 1: Yaheetech Full Upholstered Platform Bed (Beige)

2. Sikkerhedsoplysninger

• Do not exceed a weight limit of 800 lbs.
• Vær forsigtig med skarpe kanter og metaldele under montering og brug.
• Keep young children and pets away from the bed frame to prevent entrapment.
• Sørg for, at alle bolte og skruer er forsvarligt spændt før brug. Kontroller og efterspænd fastgørelseselementerne med jævne mellemrum.
• Saml sengerammen på en blød, ren overflade for at forhindre skader på produktet eller dit gulv.

3. Pakkens indhold

Før montering skal det kontrolleres, at alle komponenter er til stede og ubeskadigede. Pakken skal indeholde:

• Sengegavl (polstret)
• Sideskinner (polstrede)
• Wooden Slats (12 pieces, connected by fabric strap)
• Støtteben (med beskyttende fodpuder)
• Hardware Pack (bolts, screws, Allen wrench)
• Installationsvejledning (dette dokument)

4. Specifikationer

Figur 2: Produktmål og vægtkapacitet

5. Monteringsvejledning

Assembly typically requires two adults. Lay out all components on a soft, clean surface to prevent scratches. Follow the numbered steps below:

Step 1: Attach Headboard Legs

Secure the support legs to the headboard using the provided hardware. Ensure they are firmly attached.

Figure 3: Detail of Headboard and Support Legs

Trin 2: Saml sideskinner

Connect the upholstered side rails to the headboard and footboard (if separate) using the designated brackets and bolts. Ensure all connections are tight for stability.

Trin 3: Installer trælameller

Unroll the connected wooden slats across the bed frame. The slats are securely connected by a fabric strap to ensure proper spacing and prevent movement. Fasten the slats to the side rails as indicated in the detailed diagrams provided in the physical manual.

Figure 4: Multi-Support Slatted Frame

Trin 4: Endelig tilspænding

Once all components are in place, re-check all bolts and screws to ensure they are fully tightened. This will ensure the bed frame is stable and noise-free.

6. Betjeningsvejledning

This platform bed is designed to be used without a box spring. Simply place your mattress (latex, foam, or spring) directly onto the wooden slats.

• Ensure the mattress is centered and fully supported by the slats.
• The bed features 6 inches of under-bed space, allowing for easy cleaning with a vacuum robot or for storage.

Figure 5: Under-Bed Space for Cleaning

7. Vedligeholdelse

• Stofpleje: The linen upholstered fabric should be dry cleaned only. For minor spills, gently blot with a clean, damp klæde. Undgå skrappe kemikalier.
• Rammepleje: Periodically check all fasteners and re-tighten if necessary to maintain stability and prevent noise.
• Rensning: The 6-inch under-bed clearance allows for easy cleaning underneath the bed.

Figure 6: Soft Linen Fabric Detail

8. Fejlfinding

• Knirkende lyde: If the bed frame produces squeaking noises, re-tighten all assembly bolts and screws. Ensure the mattress is properly seated on the slats.
• Ustabilitet/Vinklen: Check that all connections are secure and that the support legs are firmly in place. Ensure the bed is on a level surface.
• Manglende dele: If any parts are missing upon arrival, please contact customer support immediately.

9. Garanti og support

Yaheetech products are designed for quality and durability. For any questions, concerns, or support needs, please refer to the contact information provided at the point of purchase or visit the official Yaheetech store online. Your satisfaction is our priority.

This product is eligible for 30-day easy returns. Customer support is available for assistance.