Oricom UHF3904WP Brugermanual til pakke

1. Introduktion

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Oricom UHF3904WP Bundle Pack. This bundle includes the Oricom UHF390 5 Watt CB Radio with Controller Speaker Microphone and the ANU240 6.5dBi UHF CB Antenna with Parallel Spring Base. Please read this manual thoroughly before using the product to ensure proper functionality and safety.

Image: Oricom banner emphasizing connectivity on the go.

2. Pakkekomponenter

Your Oricom UHF3904WP Bundle Pack should contain the following items:

• Oricom UHF390 5 Watt CB Radio Unit
• Controller Speaker Microphone
• ANU240 6.5dBi UHF CB Antenna with Parallel Spring Base
• Mounting Bracket and Hardware for Radio
• Strømkabel
• Brugervejledning (dette dokument)

Image: The Oricom UHF390 CB radio unit, controller speaker microphone, and the ANU240 antenna components.

3. Opsætning og installation

3.1. UHF390 CB Radio Installation

The UHF390 radio unit is designed for discreet installation, typically under the dashboard or seat, with the controller speaker microphone providing all necessary controls. Ensure the mounting location is secure, dry, and away from excessive heat or direct sunlight.

1. Montering: Use the supplied mounting bracket and hardware to securely fasten the radio unit in your desired location. Ensure adequate ventilation around the unit.
2. Strømtilslutning: Connect the red wire of the power cable to the positive (+) terminal of your vehicle's 12V DC power source (e.g., battery or accessory fuse box). Connect the black wire to a suitable ground point (e.g., vehicle chassis). Ensure connections are secure and fused appropriately.
3. Antenneforbindelse: Connect the coaxial cable from the ANU240 antenna to the antenna port on the rear of the UHF390 radio unit. Tighten securely by hand.
4. Mikrofonforbindelse: Plug the controller speaker microphone cable into the designated port on the radio unit.

Billede: Nærbillede view of the Oricom UHF390 radio unit and its controller speaker microphone, showing the display and controls.

3.2. ANU240 Antenna Installation

The ANU240 antenna is a 6.5dBi ground independent UHF CB Antenna with an elevated feed, heavy-duty parallel spring base, and fibreglass whip. It allows for various mounting options on bullbars or other suitable vehicle points. A specific mounting bracket (not supplied) may be required depending on your chosen mounting option.

1. Monteringssted: Choose a mounting location that provides a clear line of sight for the antenna, ideally as high as possible on the vehicle for optimal performance. Ensure the location is robust enough to support the antenna.
2. Sikker montering: Attach the parallel spring base to your chosen mounting bracket (e.g., bullbar bracket). Ensure it is firmly secured to prevent movement during vehicle operation.
3. Antennesamling: Screw the fibreglass whip onto the elevated feed of the spring base. Ensure it is hand-tightened.
4. Kabelføring: Route the coaxial cable from the antenna to the UHF390 radio unit, ensuring it is protected from sharp edges, heat, and moving parts. Avoid kinking or excessively bending the cable.

Billede: Demonteret view of the ANU240 antenna, showing the fibreglass whip and the spring base with elevated feed.

Image: Close-up of the ANU240 antenna's connection point, illustrating how the whip attaches to the base.

4. Betjeningsvejledning

The Oricom UHF390 is operated primarily via the Controller Speaker Microphone, which features a backlit LCD display for clear visibility of channel and settings.

4.1. Grundlæggende betjening

• Tænd/sluk: Tryk og hold på MAGT button on the microphone to turn the unit on or off.
• Lydstyrkekontrol: Brug drejeknap on the microphone to adjust the speaker volume.
• Kanalvalg: Drej på CH (Channel) knob eller brug Op/Ned piletaster on the microphone to select one of the 80 available CB channels.
• Send (PTT): Tryk og hold på PTT-knap (Push-To-Talk) on the side of the microphone to transmit. Release to receive.

Image: A person holding and operating the Oricom controller speaker microphone inside a vehicle.

4.2. Controller Speaker Microphone Features

The controller speaker microphone provides crystal-clear audio and convenient control directly from the mic. It features a 3-colour backlit display (red, amber, or green) for enhanced user interface visibility.

• LCD-skærm: The built-in backlit LCD display shows the current channel, signal strength (S/RF meter), and other essential information.
• Menu navigation: Brug MENU knappen og Op/Ned piletaster or Jog Dial (if applicable) to navigate through the radio's settings and features.
• CTCSS/DCS-koder: Access the menu to set Continuous Tone-Coded Squelch System (CTCSS) or Digital Coded Squelch (DCS) codes for private communication within a group. Refer to the full manual for detailed setup.
• Prioriteret kanal: The radio supports a priority channel function. Consult the full manual for programming and accessing your preferred priority channel.
• Duplex (Range Extender): Utilize the Duplex function to extend your communication range by accessing repeater stations. Refer to the full manual for activation and usage.

Image: Banner highlighting the controller speaker microphone with its three-colour backlit display options.

Image: Banner illustrating the intuitive jog dial for menu navigation on the Oricom microphone.

5. Vedligeholdelse

Proper maintenance ensures the longevity and optimal performance of your Oricom CB radio and antenna.

• Rensning: Wipe the radio unit and microphone with a soft, damp cloth. Do not use abrasive cleaners or solvents. Ensure the unit is powered off before cleaning.
• Forbindelser: Kontrollér regelmæssigt alle kabelforbindelser (strøm, antenne, mikrofon) for at sikre, at de er fastgjorte og fri for korrosion.
• Antenne inspektion: Regularly inspect the antenna for any signs of damage, such as cracks in the fibreglass whip or corrosion on the base. Ensure the spring base is functioning correctly.
• Miljøbeskyttelse: While designed for rugged use, avoid exposing the radio unit to extreme temperatures, direct water immersion, or excessive dust.

6. Fejlfinding

If you encounter issues with your Oricom UHF3904WP Bundle Pack, refer to the following common problems and solutions:

For more detailed troubleshooting or issues not listed here, please refer to the comprehensive user manual available on the Oricom website or contact Oricom customer support.

7. Tekniske specifikationer

Key specifications for the Oricom UHF3904WP Bundle Pack:

• Mærke: Oricom
• Model: UHF3904WP (Bundle Pack)
• Radio model: UHF 390
• Antenne model: ANU240
• Udgangseffekt: 5 watt
• Kanaler: 80 CB -kanaler
• Særlige funktioner: CTCSS DCS Codes, Colour Display, Backlit LCD, Durable Antenna, Intuitive Jog Dial, Priority Channel, Duplex (Range Extender)
• Antennegennemgang: 6.5dBi
• Antennebase: Heavy Duty Parallel Spring Base
• Varens vægt: Approximately 2.08 kg (Bundle)
• Oprindelsesland: Australien

Image: Banner summarizing key features of the Oricom UHF390, including 5-year warranty, 3-colour LCD, heavy-duty microphone, large LCD, dual speaker, and micro-sized transceiver.

8. Garanti og support

Oricom products are manufactured with quality materials and are backed by a comprehensive warranty.

• Garanti: This product typically comes with a 5-year warranty. Please retain your proof of purchase for warranty claims. The warranty covers defects in materials and workmanship under normal use.
• Returpolitik: Refer to your point of purchase for their specific returns policy, which is typically 30 days for refunds/replacements.
• Kundesupport: For technical assistance, troubleshooting, or warranty inquiries, please contact Oricom customer support. Visit the official Oricom webwebsted for kontaktoplysninger og yderligere ressourcer.
• Online ressourcer: Further information, FAQs, and updated manuals may be available on the Oricom Store on Amazon or the main Oricom webwebsted.