1. Introduktion
This manual provides essential information for the installation, operation, and maintenance of the Growatt MIN 3000TL-XH Single-Phase Hybrid Inverter. The Growatt MIN 3000TL-XH is a single-phase hybrid inverter designed for both grid-tied operation and battery storage, offering a maximum output power of 3000W. It features two independent MPPT controllers, allowing for flexible solar panel configurations, and is compatible with Growatt ARK XH batteries ranging from 5.12 to 17.92 kW. Its compact, IP65-rated design makes it suitable for outdoor installation in private or commercial settings.
2. Sikkerhedsoplysninger
Læs alle sikkerhedsinstruktioner omhyggeligt inden installation og betjening. Manglende overholdelse af disse instruktioner kan resultere i elektrisk stød, brand eller alvorlig personskade.
- Installation må kun udføres af kvalificeret personale.
- Ensure the inverter is disconnected from all power sources (DC and AC) before performing any maintenance or service.
- Åbn ikke inverteren casing. Der er ingen dele indeni, som kan serviceres af brugeren.
- The inverter is IP65 rated for outdoor use, but avoid direct exposure to extreme weather conditions.
- Sørg for korrekt jording af inverteren.
- Hold børn og uautoriserede personer væk fra inverteren.
3. Opsætning og installation
The Growatt MIN 3000TL-XH inverter is designed for easy installation. Follow these steps for proper setup.
3.1 Udpakning og inspektion
Carefully unpack the inverter and inspect it for any signs of damage during transit. Report any damage to your supplier immediately.
3.2 Montering af inverteren
Choose a suitable mounting location, preferably on a solid wall, away from direct sunlight and sources of heat. Ensure adequate ventilation around the unit.
Image: Growatt MIN 3000TL-XH Inverter. This image displays the front of the inverter, highlighting its sleek, compact design and the user interface panel.
3.3 Elektriske forbindelser
Connect the DC input from the solar panels to the MPPT inputs, ensuring correct polarity. Connect the AC output to the grid. If using batteries, connect the Growatt ARK XH battery system to the designated battery terminals. All connections must comply with local electrical codes.
- DC-indgang: Connect solar panel strings to the two independent MPPT inputs.
- AC-udgang: Connect to the single-phase grid (phase and neutral).
- Batteriforbindelse: For hybrid operation, connect compatible Growatt ARK XH batteries. Communication between the inverter and battery is via data cable, no separate gateway is required.
- Jording: Sørg for, at inverteren er korrekt jordforbundet.
4. Betjening af inverteren
Once installed, the Growatt MIN 3000TL-XH inverter will automatically begin operation when sufficient solar power is available and grid connection is established.
4.1 Display og betjeningselementer
The inverter features a touch button and an OLED display for monitoring system status and adjusting settings. Refer to the on-screen menu for detailed information.
4.2 driftstilstande
The MIN 3000TL-XH operates as a hybrid inverter, capable of:
- Grid-tied operation: Feeding excess solar power to the grid.
- Batteriopladning: Storing excess solar power in connected batteries.
- Batteri afladning: Supplying power from batteries to loads or the grid.
- Eget forbrug: Prioritizing power usage from solar and batteries for local loads.
4.3 Eksportkontrol
The inverter supports export control functionality, allowing you to limit the amount of power fed back to the grid, if required by local regulations.
5. Vedligeholdelse
The Growatt MIN 3000TL-XH inverter requires minimal maintenance. Regular checks ensure optimal performance and longevity.
- Visuel inspektion: Periodically check the inverter and all connections for any visible damage, corrosion, or loose wiring.
- Rensning: Keep the inverter's cooling fins and vents free from dust and debris to ensure proper heat dissipation. Use a soft, dry cloth for cleaning.
- Ydeevneovervågning: Regularly monitor the inverter's performance via the display or a connected monitoring system to ensure it is operating efficiently.
- Firmwareopdateringer: Check with Growatt support or your installer for any available firmware updates to ensure the inverter has the latest features and optimizations.
6. Fejlfinding
This section provides guidance for common issues. For more complex problems, contact qualified service personnel.
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Inverter not producing power | No DC input (solar panels), AC grid disconnected, Inverter fault | Check solar panel connections and sunlight. Verify AC grid connection. Check inverter display for error codes. |
| Lav effekt | Insufficient sunlight, dirty solar panels, shading, MPPT issue | Ensure panels are clean and free from shading. Check MPPT input voltages on display. |
| Fejlmeddelelse på displayet | Internal fault, connection issue, overvoltage/undervoltage | Note the error code and consult the full Growatt manual or contact technical support. |
7. Specifikationer
Key technical specifications for the Growatt MIN 3000TL-XH Single-Phase Hybrid Inverter.
| Feature | Værdi |
|---|---|
| Model | MIN 3000TL-XH |
| Maksimal effektivitet | 98.2 % |
| MPPT controllere | 2 uafhængige |
| Recommended Max DC Panel Power | 6000 W |
| Maks. Voltage | 500 V |
| Opstart Voltage | 100 V |
| Operation VoltagRækkevidde | 70-500 V |
| Nominel bindtage | 360 V |
| Overvoltage Beskyttelse | SPD Type II continuous |
| Vise | Touch button and OLED display |
| Beskyttelse mod indtrængen | IP65 |
| Kompatible batterier | Growatt ARK XH (5.12 to 17.92 kW) |
8. Garanti og support
For warranty information, please refer to the warranty card included with your product or visit the official Growatt webwebstedet. Behold din købskvittering som købsbevis.
For technical support, troubleshooting assistance beyond this manual, or spare parts, please contact your authorized Growatt dealer or Growatt customer service. Provide your product model and serial number when seeking support.
Fabrikant: GROWATT
Modelnummer: MIN 3000TL-XH
