Vangoa LED-1500

Vangoa 1500W tågemaskine med LED-lys brugsanvisning

1. Introduktion

The Vangoa 1500W Fog Machine is designed to produce atmospheric fog effects with integrated LED lighting. This device is suitable for various events, including parties, stages, and special effects. This manual provides essential information for the safe and effective operation, setup, maintenance, and troubleshooting of your fog machine.

Vangoa 1500W Fog Machine with LED lights and remote controls

Image 1.1: The Vangoa 1500W Fog Machine with its included remote controls, emitting purple fog.

2. Sikkerhedsoplysninger

Please read and understand all safety instructions before operating the fog machine. Failure to follow these instructions may result in injury or damage to the product.

  • Strømforsyning: This fog machine operates under 110-130V. Ensure your power source matches this requirement.
  • Væskeforbrug: Use only dedicated, non-toxic fog fluid. Never operate the machine without fluid in the tank. Using incorrect fluid can damage the machine and pose health risks.
  • Overophedningsbeskyttelse: The machine is equipped with an automatic overheat protection system. If the machine operates continuously for approximately 1 minute, it will stop to prevent overheating. Allow it to cool down before restarting. This protects the equipment's safety and performance.
  • Varm overflade: The fog machine's nozzle and surrounding areas become hot during operation. Avoid touching these surfaces to prevent burns.
  • Ventilation: Ensure adequate ventilation around the machine during operation to prevent heat buildup.
  • Afbrydelse: Always disconnect the main power plug before performing any service, maintenance, or refilling the fluid tank.
  • Placering: Place the machine on a stable, flat surface. Keep it away from flammable materials and ensure the fog output is directed away from people and sensitive equipment.
Back panel of the Vangoa Fog Machine showing power input, wired remote control input, and a warning label.

Billede 2.1: Bagside view of the fog machine highlighting power and remote connections, along with safety warnings.

3. Pakkens indhold

Bekræft at alle varer er til stede i pakken:

  • Vangoa 1500W Fog Machine (Model: LED-1500)
  • Wired Remote Control (3m cable)
  • Wireless Remote Control for Fog Output
  • Wireless Remote Control for LED Lights
  • Strømledning
Components of the Vangoa Fog Machine package including the machine, power cord, wired remote, and two wireless remotes.

Billede 3.1: Overview of the fog machine and its accessories.

4. Produktfunktioner

  • Høj effekt: 1500W heating element for rapid fog production.
  • High Volume Fog: Produces up to 25000 CFM (cubic feet per minute) of fog.
  • Integreret LED belysning: Funktioner 6-stage LED lights with 15 adjustable colors.
  • Lyseffekter: Includes 4 special lighting effects: FADE, FLASH, SMOOTH, and STROBE.
  • Stor tankkapacitet: 2.5-liter fluid tank for extended operation without frequent refills.
  • Flere kontrolmuligheder: Comes with a wired remote control and two distinct wireless remote controls (one for fog, one for lights).
  • Holdbar konstruktion: Built with iron and aluminum metals for excellent heat dissipation and longevity.
  • Sikkerhedscertificeringer: FCC, CE, and ROSH certified.
Vangoa Fog Machine emitting colored fog, with an illustration of 15 color options and 4 light effects.

Image 4.1: The fog machine demonstrating its 15 color options and 4 light effect modes.

Close-up of the Vangoa Fog Machine showing its spray nozzle, LED lights, cooling net, and independent power switch.

Billede 4.2: Detaljeret view of the machine's components, emphasizing durability and energy efficiency.

5. Opsætning

  1. Fill the Fluid Tank: Unscrew the cap of the fluid tank and carefully pour dedicated fog fluid (not included) into the tank. Ensure the tank is not overfilled. Securely fasten the cap.
  2. A hand pouring fog fluid into the machine's tank.

    Image 5.1: Step 1 - Filling the fog fluid tank.

  3. Connect Power and Wired Remote: Connect the power cord to the machine and then to a suitable 110-130V power outlet. Plug the wired remote control sensor cord into the designated port on the back of the machine.
  4. Tænd og forvarm: Flip the main power switch to the 'ON' position. The machine will begin to preheat. This process typically takes 3-4 minutes. The indicator light on the wired remote control will illuminate red during preheating and turn green when the machine is ready to produce fog.
  5. The wired remote control with its red indicator light, signifying preheating.

    Image 5.2: The wired remote control indicating preheating status.

6. Betjeningsvejledning

6.1 Tågeudgangskontrol

  • Kabelført fjernbetjening: Once the preheat indicator light turns green, press the button on the wired remote control to release fog. Release the button to stop fog production.
  • Wireless Remote Control (Fog): Use the dedicated wireless remote for fog output. Press the 'FOG' button to activate fog. Some models may have 'LOCK' and 'UNLOCK' buttons for continuous fog or timed bursts.
  • Kontinuerlig drift: The machine can operate continuously for approximately 1 minute before its overheat protection activates. Allow the machine to cool down for a few minutes before resuming fog production.

6.2 LED-lysstyring

  • Wireless Remote Control (Lights): Use the separate wireless remote control to manage the LED lights.
  • Farvevalg: Choose from 15 available colors using the color buttons on the remote.
  • Lyseffekter: Select from FADE, FLASH, SMOOTH, or STROBE modes to create dynamic lighting effects.
Diagram showing the wireless remote control for fog, the light output distance, and the wired remote control length.

Image 6.1: Control options for fog output, including wireless and wired remote distances.

Illustration of using both wired and wireless remote controls to operate the fog machine.

Image 6.2: Demonstrating the use of both wired and wireless remote controls.

Three images showing the fog machine with only LED lights on, only fog on, and both fog and LED lights on.

Image 6.3: Different operational modes: LED only, Fog only, and Fog with LED.

7. Vedligeholdelse

Regelmæssig vedligeholdelse sikrer din tågemaskines levetid og optimale ydeevne.

  • Væsketank: After each use, if there is remaining fluid, it is recommended to drain the tank and clean it with distilled water to prevent residue buildup.
  • Rensning: Periodically clean the exterior of the machine with a soft, dry cloth. Do not use abrasive cleaners or allow liquids to enter the internal components.
  • Dyse: Ensure the nozzle is clear of any blockages. If fog output is reduced, a small amount of fog machine cleaner (specifically designed for fog machines) can be run through the system.
  • Opbevaring: Store the machine in a cool, dry place away from direct sunlight and extreme temperatures. Ensure the fluid tank is empty or contains fresh fluid before long-term storage.

8. Fejlfinding

ProblemMulig årsagLøsning
Ingen tågeudgang
  • Ingen strøm
  • Ingen tågevæske
  • Maskinen er ikke forvarmet
  • Overophedningsbeskyttelse aktiveret
  • Pumpeblokering
  • Kontroller strømtilslutningen
  • Fill fluid tank
  • Wait for preheat indicator to turn green
  • Lad maskinen køle af
  • Contact support for pump issues
LED-lys virker ikke
  • Wireless remote battery low
  • Incorrect remote selected
  • Lystilstand slået fra
  • Udskift fjernbetjeningens batteri
  • Ensure correct light remote is used
  • Activate light mode via remote
Svag tågeproduktion
  • Lavt væskeniveau
  • Partial nozzle blockage
  • Utilstrækkelig forvarmning
  • Refill fluid tank
  • Rengør dysen (se Vedligeholdelse)
  • Allow full preheating cycle

9. Specifikationer

  • Modelnummer: LED-1500
  • Output Wattage: 1500 watt
  • Tågeoutput: Op til 25000 CFM
  • Tank kapacitet: 2.5 liter (2500 ml)
  • LED lys: 6-stage, 15 colors, 4 effects (FADE, FLASH, SMOOTH, STROBE)
  • Strømindgang: 110-130V
  • Varens vægt: 13.07 pund (5.93 kg)
  • Produktdimensioner: 19 x 11 x 8 tommer (48.26 x 27.94 x 20.32 cm)

10. Garanti og support

For warranty information or technical support, please refer to the documentation included with your purchase or contact Vangoa customer service directly. Keep your purchase receipt as proof of purchase.

Relaterede dokumenter - LED-1500

Preview Vangoa YSH402 Laserlys - DJ Partylys med lydaktivering og fjernbetjening
Udforsk Vangoa YSH402, en opgraderet DJ-festlampe med nordlyseffekter, lydaktivering og fjernbetjening. Ideel til fester, klubber og rumdekorationer, da den tilbyder dynamisk belysning til fester.tagog hændelser. Inkluderer produktparametre, funktioner og sikkerhedsretningslinjer.
Preview Vangoa Trådløs DMX Brugermanual - Model DMX-17
User manual for the Vangoa Wireless DMX system, model DMX-17. This guide covers product description, features, specifications, operating instructions for installation, ID code setting, and connection, as well as package contents and warranty information.
Preview VANGOA EWI-100 MIDI Saxofon Brugermanual | Elektronisk Blæseinstrument Guide
Oplev VANGOA EWI-100 MIDI-saxofonen, et kompakt elektronisk blæseinstrument og MIDI-inputenhed. Denne brugermanual indeholder detaljerede instruktioner om funktioner, betjening, MIDI-tilslutninger og spilleteknikker til EWI-100.
Preview Vangoa Sinco Connector Windows Bluetooth MIDI-enhedsforbindelsesvejledning
En omfattende guide til tilslutning af Vangoa MIDI-enheder som VMX, SMC-PAD og SMK25V2 til Windows-computere via Bluetooth ved hjælp af Sinco Connector-driveren, inklusive installations- og parringstrin.
Preview Vangoa VMK25 Pro 25-tangenters MIDI-keyboardcontroller brugermanual
Omfattende brugermanual til Vangoa VMK25 Pro, en MIDI-keyboardcontroller med 25 tangenter og 16 performance-pads, der beskriver dens funktioner, opsætning, betjening, specifikationer og fejlfinding.
Preview Vangoa VGK611 Oplyst Elektronisk Tastatur til Undervisning Brugermanual
Omfattende brugermanual til Vangoa VGK611 Lighted Teaching Electronic Keyboard, der dækker hovedfunktioner, panelkontroller, strømforsyning, betjeningstilstande, undervisningsfunktioner og sikkerhedsforanstaltninger. Ideel til begyndere og musikundervisning.