Indledning
This manual provides detailed instructions for the safe and efficient operation of your Haisito P30 30 Amp Smart Battery Charger. Please read this manual thoroughly before use and retain it for future reference.
Produkt overview
The Haisito P30 is a versatile 6V/12V/24V smart battery charger, maintainer, and desulfator designed for various battery types, including Lithium, LiFePO4, and Lead-Acid (AGM, Gel, SLA, MF, Flooded, VRLA, Wet batteries). It features one-button start, adjustable current levels, pulse repair mode, trickle charge function, and multiple safety protections.
Image: The Haisito P30 Smart Battery Charger with its digital display and battery clamps.
Sikkerhedsoplysninger
Always prioritize safety when operating battery charging equipment. Failure to follow safety guidelines can result in injury or damage to property.
- Ensure proper ventilation during charging to prevent gas buildup.
- Brug øjenbeskyttelse og handsker, når du håndterer batterier.
- Rygning er forbudt, og der må ikke være gnister eller åben ild i nærheden af batteriet eller opladeren.
- Connect the charger to the battery terminals correctly (positive to positive, negative to negative) before plugging into a power outlet.
- Disconnect the power cord from the outlet before disconnecting the battery clamps.
- Avoid overcharging; the P30 features automatic full charge stop protection.
- The charger includes built-in protections against overvoltage, short circuit, overcurrent, and overheating.
Opsætning
- Pak opladeren ud: Remove the Haisito P30 charger and all accessories from the packaging.
- Undersøg for skader: Tjek oplader, kabler og clampKontroller for tegn på skade. Må ikke anvendes, hvis produktet er beskadiget.
- Tilslut batteri Clamps: Sæt batteriet i klamp cable into the designated port on the charger. Ensure a secure connection.
- Tilslut strømkabel: Plug the AC power cable into the charger.
- Forbered batteri: Sørg for, at batteripolerne er rene og fri for korrosion.
Image: The Haisito P30 charger demonstrating its portable design with foldable handles, storage clips for cables, and integrated harness storage.
Betjeningsvejledning
1. Connecting to a Battery
- Tilslut den røde positive (+) clamp til den positive (+) batteripol.
- Tilslut den sorte negative (-) clamp til den negative (-) batteripol.
- Plug the charger's AC power cable into a suitable electrical outlet. The charger will display "OFF" until connected to a battery.
- Opladeren vil automatisk registrere batterivolumentage (6V, 12V, or 24V) and begin the charging process.
Video: A demonstration of connecting the Haisito Smart Battery Charger to a battery, showing the automatic detection of voltage and the display of charging information.
2. Selecting Charging Mode and Current
The P30 charger features a one-button start and a clear LCD display. Use the "Mode Selection" button to cycle through different battery types and adjust the charging current.
- Batterityper: The charger supports Lithium, LiFePO4, and Lead-Acid (AGM/GEL/SLA/MF/FLOODED/VRLA/Wet) batteries. The charger automatically identifies the battery type.
- Justerbar strøm: For 12V batteries, you can select from LOW (3A), MEDIUM (15A), or HIGH (30A) charging currents. For 6V and 24V batteries, the current adjusts automatically (6V/10A Max, 24V/16A Max). Select the appropriate current based on your battery's capacity and charging requirements.
Image: The Haisito P30 charger's display showing the three-speed current selection (Low 3A, Medium 15A, High 30A) and the Repair Mode option.
3. Forståelse af LCD-skærmen
The large LCD provides real-time information about the charging process:
- Ladestrøm: Viser den aktuelle opladning ampslette.
- Charge Voltage: Viser det aktuelle batterivolumentage.
- Batteri Voltage: Indicates the detected battery voltage (6V, 12V, 24V).
- Opladningsmængde: Displays the amount of charge delivered (AH).
- Indetemperatur: Shows the internal temperature of the charger.
- FUL: Indikerer, at batteriet er fuldt opladet.
- OFF: Indicates the charger is powered on but not connected to a battery.
- Ende: Indicates the repair process has ended.
Image: A close-up of the Haisito P30's LCD display, showing various charging parameters like charge current, voltage, temperature, and status indicators.
Vedligeholdelsesfunktioner
1. Trickle Charge & Maintainer
Once a battery is fully charged, the P30 automatically switches to trickle charge mode. This function maintains the battery at an optimal charge level without overcharging, making it suitable for long-term storage and battery maintenance.
2. Pulse Repair Mode (Desulfator)
The Pulse Repair mode is designed to activate and restore older, sulfated batteries. This process can help improve battery performance and extend its lifespan. To use, select the "Repair" mode on the charger. The display will show "End" when the repair process is complete.
Fejlfinding
- Charger displays "OFF" when connected to battery: Sørg for batteri clamps are securely connected to the correct terminals (positive to positive, negative to negative). Check if the AC power cable is properly plugged into the outlet.
- Opladning starter ikke: Verify the battery type is compatible with the charger. Ensure the battery is not severely damaged or completely dead (below minimum voltage for detection).
- Oplader overophedning: The charger has built-in temperature protection. If it overheats, it will reduce current or stop charging. Ensure adequate ventilation around the charger.
- Display shows error code: Se den specifikke fejlkode i den fulde produktmanual (hvis tilgængelig), eller kontakt kundesupport.
Specifikationer
- Model: H-30 (P30)
- Input bindtage: 100-240V AC
- Udgang Voltage: 6V / 12V / 24V DC (Automatic Detection)
- Max udgangsstrøm: 6V/10A, 12V/30A, 24V/16A
- Adjustable Current (12V): LOW (3A), MEDIUM (15A), HIGH (30A)
- Understøttede batterityper: Lithium, LiFePO4, Lead-Acid (PB/AGM/GEL/EFB, MF, FLOODED, VRLA, SLA, Wet batteries)
- Driftstemperatur: -10°C (14°F) til 40°C (104°F)
- Beskyttelsesfunktioner: Temperature protection, low voltage beskyttelse, overvoltage protection, short circuit protection, overcurrent protection, electrostatic spark protection, reverse polarity protection, full charged stop protection.
- Produktdimensioner: 8.4 x 10.4 x 6 tommer
- Varens vægt: 3.54 pund
- Certificeringer: UL
Image: The Haisito P30 charger shown with its packaging and instruction manual, highlighting its compact dimensions.
Garanti og support
For warranty information or technical support, please refer to the contact details provided in your product packaging or visit the official Haisito webwebsted. Beskyttelsesplaner kan købes separat.
Manufacturer: Haisito
Første tilgængelighedsdato: 3. august 2023
