maXpeedingrods T6-seriens gevindskårne hjul til Tesla Model Y AWD 2020+ instruktionsmanual

1. Introduktion

This manual provides essential information for the installation, operation, and maintenance of your maXpeedingrods T6 Series Coilovers. These coilovers are specifically designed for the Tesla Model Y AWD 2020+ to enhance driving performance and adjustability.

Figure 1: Complete maXpeedingrods T6 Series Coilover Kit

2. Nøglefunktioner

• Anvendelse: Designed for Tesla Model Y AWD 2020+ vehicles.
• T6 Series Street Performance: Optimized for street driving, featuring an upgraded damper knob for easier adjustment, high-quality damping oil for improved viscosity, and full aluminum plates for enhanced durability. This series aims to balance comfort, performance, and safety.
• Højtræksfjedre: Front and Rear spring rates are 10kg/mm (560 lbs/in). Springs are stress-tested over 600,000 times with less than 0.04% distortion, ensuring long-term performance.
• 24 niveauer justerbar Dampeh: Allows precise control over ride characteristics. Settings are categorized for different driving conditions:
  • Level 0-8: Recommended for street use.
  • Level 9-16: Recommended for mountain roads or varied terrain.
  • Level 17-24: Recommended for race track use.
• Justerbar højde: Thread-type ride height adjustment allows for a lowering range of 0-45 mm from the original ride height. This design helps reduce turning noise and improves steering feel and response.

Figure 2: Benefits of maXpeedingrods T6 Series Coilovers on Tesla Model Y

3. Komponent overview

The maXpeedingrods T6 Series Coilover system consists of several key components working in unison to provide adjustable suspension performance:

Figur 3: Detaljeret view of a maXpeedingrods Coilover with labeled components.

• Gummibeslag øverst: Made from 6061-T6 aluminum, designed for lightweight performance and reduced noise.
• 24-Way Damping Adjustable Knob: Located at the top of the strut for easy access to adjust rebound damping.
• High Tensile Spring: Provides consistent spring rate and durability.
• Støvstøvle i fuld længde: Protects the damper shaft from contaminants, extending the life of the coilover.
• 6061-T6 Aluminum Perch: Lightweight and strong, used for spring support and height adjustment.
• Matte Finish Lower Mount: Anti-rust and heavy-duty construction for secure attachment to the vehicle.
• Locking Rings: Used in conjunction with the perches to secure desired ride height settings.

4. Installation

Warning: Professional installation is highly recommended. Improper installation can lead to vehicle damage, loss of control, and serious injury. Always refer to your vehicle's specific service manual for detailed removal and installation procedures.

General installation steps include:

1. Løft køretøjet sikkert og fastgør det på donkrafte.
2. Fjern hjulene.
3. Carefully disconnect and remove the OEM suspension components.
4. Install the new maXpeedingrods coilovers, ensuring all bolts are torqued to the manufacturer's specifications (refer to your vehicle's service manual).
5. Adjust initial ride height and damping settings as desired (see Section 5).
6. Monter hjulene igen, og sænk køretøjet.
7. Perform a professional wheel alignment after installation.

5. Betjening og justeringer

5.1 Damping justering

Your coilovers feature 24 levels of damping adjustment. The adjustment knob is located at the top of each strut. To adjust:

1. Find damping adjustment knob on the top of the coilover.
2. Turn the knob clockwise for a firmer ride (harder damping) or counter-clockwise for a softer ride (softer damping).
3. Refer to the recommended settings in Section 2 (Features) for guidance based on your driving conditions.

Figur 4: Damper Adjustment Knob

Figure 5: Recommended Damping Settings for Various Driving Conditions

5.2 Ride Height Adjustment

The coilovers allow for 0-45 mm of ride height adjustment. To adjust the ride height:

1. Safely lift the vehicle and support it on jack stands.
2. Loosen the locking rings on the coilover body using the provided spanner wrenches.
3. Rotate the lower perch to raise or lower the vehicle. Ensure both sides of an axle are adjusted equally.
4. Once the desired height is achieved, tighten the locking rings securely.
5. Lower the vehicle and perform a bounce test to settle the suspension.
6. A professional wheel alignment is required after any significant ride height adjustment.

6. Vedligeholdelse

Regular maintenance ensures optimal performance and longevity of your coilovers:

• Regelmæssig inspektion: Periodically check for any signs of leaks, damage, or loose components. Inspect the dust boots for tears.
• Rensning: Keep the coilover bodies and threads clean, especially after driving in harsh conditions (e.g., salt, dirt). Use mild soap and water, then rinse thoroughly.
• Smøring: Apply a thin layer of anti-seize lubricant to the threads of the coilover body to prevent corrosion and ensure smooth height adjustments.
• Momentkontrol: Re-check the torque of all mounting bolts periodically, especially after the first few hundred miles of driving.

7. Fejlfinding

Hvis du oplever problemer med dine coilovers, kan du overveje følgende almindelige problemer og løsninger:

• Støj (Klunken/Knirken):
  • Kontroller alle monteringsbolte for korrekt moment.
  • Inspect spring perches and locking rings for tightness.
  • Ensure no components are rubbing against each other or the vehicle chassis.
  • Verify top mount bearings are not worn.
• Ujævn kørehøjde:
  • Re-measure and adjust the ride height on all four corners.
  • Ensure spring preload is set correctly (7-10 mm recommended).
• Dårlig håndtering/kørekvalitet:
  • Juster damping settings (softer for comfort, firmer for performance).
  • Sørg for at dæktrykket er korrekt.
  • Verify wheel alignment is within specifications.
• Væskelækager:
  • A small amount of oil residue is normal. Significant fluid leakage indicates a seal failure. Contact customer support for assistance.

Ved vedvarende problemer skal du kontakte en kvalificeret biltekniker.

8. Specifikationer

9. Garanti og support

maXpeedingrods products are backed by a manufacturer's warranty. For specific warranty terms, claims, or technical support, please refer to the warranty card included with your product or visit the official maXpeedingrods webwebsted. Gem din købsbevis af garantihensyn.

For further assistance, you may contact maXpeedingrods customer service directly.