ADATA Fusion 1600W Titanium Power Supply Unit User Manual

1. Introduktion

This manual provides essential information for the proper installation, operation, and maintenance of your ADATA Fusion 1600W Titanium Power Supply Unit (PSU). Designed for high-performance computing systems, this 80 Plus Titanium certified PSU features ATX 3.0 and PCIe 5.0 compatibility, ensuring stable and efficient power delivery. Please read this manual thoroughly before proceeding with installation or use.

2. Sikkerhedsoplysninger

• Elektrisk fare: Power supplies contain high voltage-komponenter. Åbn ikke strømforsyningen casing. Service bør kun udføres af kvalificeret personale.
• Strømafbrydelse: Always disconnect the AC power cord from the wall outlet before installing, removing, or cleaning the PSU or any other computer components.
• Korrekt jording: Ensure your computer system and the wall outlet are properly grounded to prevent electrical shock.
• Ventilation: Do not block the ventilation openings of the PSU. Ensure adequate airflow within your computer case to prevent overheating.
• Fugtighed: Keep the PSU away from water, humidity, and other liquids.
• Temperatur: Operate the PSU within the specified temperature range. Avoid extreme heat or cold.
• Kabelstyring: Route cables carefully to avoid pinching or damage, which can lead to short circuits or fire hazards.

3. Pakkens indhold

Bekræft at alle varer er til stede i din pakke:

• ADATA Fusion 1600W Titanium Power Supply Unit
• Modular Cable Set (including Motherboard, CPU, PCIe/GPU, SATA, and Molex cables)
• AC strømledning
• Monteringsskruer
• Brugervejledning (dette dokument)

4. Opsætning

4.1. Fysisk installation

1. Ensure your computer is powered off and the AC power cord is disconnected from the wall outlet.
2. Åbn din computerkasse.
3. Locate the PSU mounting area, typically at the bottom or top rear of the case.
4. Carefully slide the ADATA Fusion PSU into the designated slot.
5. Fastgør strømforsyningen til kabinettet med de medfølgende monteringsskruer.

4.2. Kabelforbindelser

The ADATA Fusion 1600W PSU is fully modular, allowing you to connect only the cables required for your system. Refer to the image below for port identification.

This image displays the ADATA Fusion 1600W Titanium Power Supply Unit from an angled top-down perspective. The modular cable connection panel is visible on the left side, labeled for SATA & Molex, Prime Port - Motherboard, CPU & VGA, and 12VHPWR. The top features a fan grill with a geometric pattern, revealing the cooling fan beneath. The side of the unit shows the 'FUSION' branding.

1. Bundkort strøm: Tilslut 24-bens ATX-kablet fra strømforsyningen til den tilsvarende port på dit bundkort.
2. CPU Power: Connect the 4+4-pin or 8-pin EPS/CPU cable(s) from the PSU to the CPU power connector(s) on your motherboard.
3. PCIe/GPU Power: Connect the appropriate 6+2-pin or 12VHPWR PCIe 5.0 cables from the PSU to your graphics card(s). Ensure all required power connectors on your GPU are utilized.
4. SATA/Molex Power: Connect SATA power cables to your storage drives (HDDs, SSDs) and optical drives. Use Molex cables for other peripherals as needed.
5. Perifere forbindelser: Connect any other necessary cables for case fans, RGB controllers, or other components.
6. AC strøm: Once all internal connections are made, connect the AC power cord to the PSU and then to a grounded wall outlet.

5. Betjening

After completing the installation and cable connections:

1. Ensure the power switch on the back of the PSU is in the 'ON' position.
2. Power on your computer system.
3. The ADATA Fusion PSU is designed for efficient and stable operation. Its 80 Plus Titanium certification indicates high power efficiency, reducing heat generation and energy consumption.
4. This PSU supports Prime Ecosystem Management Software. Refer to the ADATA website for software download and instructions on monitoring and controlling PSU performance, fan speeds, and other features.

6. Vedligeholdelse

• Rensning: Periodically clean the exterior of the PSU and the fan grill to prevent dust buildup. Use compressed air to gently remove dust from the fan and internal components (ensure the PSU is powered off and unplugged).
• Kabelinspektion: Kontroller regelmæssigt alle kabelforbindelser for at sikre, at de er sikre og fri for beskadigelse.
• Miljøforhold: Maintain a clean, dry, and well-ventilated environment for your computer system to optimize PSU lifespan and performance.

7. Fejlfinding

If you encounter issues with your ADATA Fusion PSU, consider the following common troubleshooting steps:

• Ingen strøm:
  • Sørg for, at netledningen er korrekt tilsluttet både strømforsyningen og stikkontakten.
  • Verify the PSU power switch is in the 'ON' position.
  • Check the wall outlet with another device to confirm it has power.
  • Ensure all modular cables are firmly seated in both the PSU and the respective components.
• Systemustabilitet/nedbrud:
  • Confirm that your PSU wattage is sufficient for all installed components.
  • Tjek for løse kabelforbindelser.
  • Overvåg systemtemperaturerne for at sikre, at komponenterne ikke overopheder.
• Ventilatorstøj:
  • Ensure the PSU fan is not obstructed by cables or dust.
  • If using Prime Ecosystem Management Software, check fan speed settings.

If problems persist after attempting these steps, contact ADATA customer support for further assistance.

8. Specifikationer

9. Garanti og support

ADATA provides a limited warranty for the Fusion 1600W Titanium Power Supply Unit. For detailed warranty terms, conditions, and registration information, please visit the official ADATA webwebstedet eller se garantikortet, der følger med dit produkt.

For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact ADATA customer service through their official webwebstedet eller kontaktoplysningerne på din produktemballage.

ADATA Officiel Webwebsted: www.adata.com