HIBREW H10A Programmable Espresso Machine User Manual

1. Vigtige sikkerhedsforanstaltninger

Please read all instructions carefully before using the HIBREW H10A Espresso Machine. Retain this manual for future reference. Improper use may result in injury or damage to the appliance.

• Sørg for, at apparatet er tilsluttet en jordet stikkontakt med den korrekte lydstyrke.tage (120 volt).
• Apparatet, netledningen eller stikket må ikke nedsænkes i vand eller andre væsker.
• Hold hænder og ledninger væk fra varme overflader og damp.
• Tag stikket ud af maskinen før rengøring og når den ikke er i brug.
• Brug ikke apparatet med en beskadiget ledning eller stik.
• Dette apparat er kun til husholdningsbrug.

2. Produktet er slutview

The HIBREW H10A is a programmable semi-automatic espresso machine designed for home and office use. It features a 19-bar high-pressure pump, a brushed stainless steel body, and a steam wand for milk frothing. Its programmable functions allow for precise control over coffee extraction and milk preparation.

Figur 2.1: Forside view of the HIBREW H10A Espresso Machine, showing an espresso shot being brewed into a glass cup.

Figure 2.2: Dimensions and key features of the HIBREW H10A Espresso Machine.

3. komponenter

• Main Unit (Stainless Steel Body)
• 1.8L aftagelig vandtank
• Portafilter (58mm)
• Filter Baskets (Single/Double Shot)
• Steam Wand with Detachable Head
• Drip Tray (Stainless Steel with Red Water Level Reminder)
• Tamper (Included)
• Måleske

4. Indledende opsætning

4.1 Udpakning

1. Fjern forsigtigt al emballage og tilbehør.
2. Inspect the machine for any damage. Do not use if damaged.
3. Placer maskinen på en stabil, flad og varmebestandig overflade.

4.2 Rengøring ved første brug

1. Vask vandtanken, portafilteret, filterkurvene og drypbakken med varmt sæbevand. Skyl grundigt og tør.
2. Fyld vandbeholderen med frisk, koldt vand.
3. Run several cycles of hot water through the group head and steam wand without coffee to flush the internal system.

4.3 Påfyldning af vandtanken

The machine features a 1.8L removable water tank. Lift the tank from the back of the machine, fill it with fresh, cold water, and securely place it back into position.

Figure 4.1: Details of the digital display, carrying handle, removable water tank, and drip tray.

5. Betjeningsvejledning

5.1 Tænd/sluk

Press the power button (usually indicated by a universal power symbol) to turn the machine on or off. The machine will undergo a brief heating cycle upon startup.

5.2 programmerbare funktioner

The HIBREW H10A offers several programmable settings for customized brewing. Refer to the control panel and the following instructions:

Figur 5.1: Overview of programmable settings on the control panel.

• Pre-infusion Time Adjustment: Press and hold the single cup and double cup buttons simultaneously for 2 seconds to enter pre-infusion time setting (0-10 seconds). Use the single/double cup buttons to adjust.
• Extraction Temperature Adjustment: Press and hold the single cup/double cup button for 2 seconds to enter temperature setting. Adjust hot extraction temperature (90°C-95°C) or cold extraction temperature (25°C).
• Brew Volume Adjustment: Press and hold the single cup/double cup button for 2 seconds to customize the capacity (single cup: 35-150ml, double cup: 70-300ml).
• Steam Temperature Adjustment: Press and hold the steam button for 2 seconds to customize the steam temperature setting (125°C-150°C).
• Temperature Display Conversion: Skift mellem visning af Celsius (°C) og Fahrenheit (°F).
• Gendan fabriksindstillinger: Reset all programmable settings to their default values.

Figure 5.2: Adjusting extraction temperature on the HIBREW H10A.

5.3 Fremstilling af espresso

1. Maling af kaffe: Use freshly ground coffee beans. For optimal espresso, a fine grind is recommended. The machine is compatible with a 58mm portafilter.
2. Filling and Tamping: Place the desired filter basket into the portafilter. Fill with ground coffee and tamp evenly with firm pressure. Wipe any excess grounds from the rim.
3. Montering af portafilter: Sæt portafilteret i gruppehovedet, og drej det fast til højre, indtil det er sikkert låst.
4. Brygning: Place your cup(s) under the portafilter spouts. Press the single or double cup button to start brewing. The machine will automatically stop based on your programmed brew volume.

Figure 5.3: Illustration of the espresso extraction process and portafilter components.

5.4 Dampning af mælk

The powerful steam system with a 270° rotatable steam wand allows for quick production of dense hot milk froth for lattes and cappuccinos.

1. Ensure the machine is heated to steam temperature (125°C-150°C).
2. Fyld en mælkeskummerkande med kold mælk.
3. Sænk spidsen af ​​dampdysen lige under mælkens overflade.
4. Turn the steam knob to activate the steam. Move the pitcher up and down to create froth.
5. Once desired texture and temperature are reached, turn off the steam and wipe the wand immediately with a damp klæde.

5.5 Cup Warming Function

The top of the espresso machine features a cup warming tray. Place your espresso cups on this tray to keep them warm, ensuring your coffee stays hot longer after brewing.

6. Rengøring og vedligeholdelse

6.1 Daglig rengøring

• Drypbakke: Empty and clean the stainless steel drip tray daily. The red water level reminder indicates when it needs emptying.
• Portafilter og filterkurve: Efter hver brug skal du fjerne portafilteret, kassere kaffegrumsen, og skylle portafilteret og filterkurven under varmt vand.
• Dampstang: Tør dampdysen af ​​med en tynd advarsel umiddelbart efter dampning af mælk.amp cloth to prevent milk residue from drying and clogging. The detachable design allows for thorough cleaning.

6.2 Afkalkning

Regular descaling is essential to maintain machine performance and extend its lifespan, especially in areas with hard water. Follow the instructions provided with a suitable descaling solution. Descaling frequency depends on water hardness and usage.

7. Fejlfinding

If you encounter issues with your HIBREW H10A Espresso Machine, refer to the following common problems and solutions:

8. Produktspecifikationer

9. Garanti og support

For warranty information or technical support, please refer to the documentation included with your purchase or contact HIBREW customer service. Keep your proof of purchase for warranty claims.