DBPOWER 1600A 18000mAh Portable Car Jump Starter (Model DJS90) Instruction Manual

1. Produktet er slutview

The DBPOWER DJS90 Portable Car Jump Starter is a versatile device designed to provide emergency jump-starting for vehicles, act as a portable power bank, and offer essential lighting functions. It features a high peak current of 1600A and an 18000mAh battery capacity, capable of starting various 12V vehicles.

Figure 1: DBPOWER DJS90 Portable Car Jump Starter and included accessories.

Nøglefunktioner:

• Vehicle Jump Starting: 1600A peak current for 12V vehicles (up to 7.5L gas / 5.5L diesel engines).
• Bærbar Power Bank: 18000mAh capacity with 2 USB outputs for charging smartphones, tablets, and other devices.
• Nødlys LED: Features stable, strobe, and SOS signal modes.
• Sikkerhedsbeskyttelse: Heavy-duty smart clamps with low/high voltage, over-temperature, short-circuit, reverse polarity, and jump starter time-out protection.
• Holdbarhed: Operates in temperatures from -4°F to 140°F.

2. Pakkens indhold

Bekræft at alle varer er til stede i din pakke:

Figure 2: What's in the Box - DBPOWER DJS90 Jump Starter and accessories.

• 1x DBPOWER DJS90 Jump Starter Unit
• 1x Intelligent Jumper Clamps
• 1x USB Line (Charging Cable)
• 1x brugermanual
• 1x Hard Shell Storage Case

3. Opsætning og opladning

Before initial use, fully charge the jump starter. It is recommended to recharge the device after each use to maintain optimal battery life.

Opladning af Jump Starter:

1. Locate the USB input port on the jump starter.
2. Connect the provided USB charging cable to the input port.
3. Plug the other end of the USB cable into a suitable USB power adapter (not included) or a car's USB port.
4. The LED display will indicate the charging progress. Ensure the device is fully charged before storing or using for jump-starting.

Figure 3: Multifunction ports on the DBPOWER DJS90.

4. Betjeningsvejledning: Start af et køretøj med startkabler

Always ensure the jump starter is at least 50% charged before attempting to jump-start a vehicle.

Trin-for-trin guide:

1. Klargør køretøjet: Sluk for bilens tænding og alt tilbehør. Træk parkeringsbremsen.
2. Connect Jumper Cables to Jump Starter: Open the protective flap on the jump starter and firmly insert the blue end of the intelligent jumper clamps into the car jump start output port.
3. Tilslut Clamps til batteri: Attach the red (positive, +) clamp to the positive terminal of the vehicle's battery. Attach the black (negative, -) clamp til den negative pol på køretøjets batteri. Sørg for en sikker forbindelse.
4. Kontroller indikatorlys: Indikatorlampen på den intelligente jumper-kl.amps should turn solid green, indicating a safe and ready connection. If it flashes or shows a different color, refer to the troubleshooting section.
5. Start køretøj: Enter your vehicle and start the engine. If the vehicle does not start immediately, wait 30 seconds before trying again. Do not attempt more than 3 consecutive starts.
6. Fjern Clamps: Once the vehicle starts, immediately remove the black (negative) clamp from the vehicle battery, followed by the red (positive) clamp. Then, disconnect the jumper clamps fra jumpstarteren.

Figure 4: Instructions to Start Your Vehicle.

5. Operating Instructions: Power Bank & LED Light

Bruger som en Power Bank:

The DJS90 can charge various electronic devices via its USB output ports.

1. Connect your device's USB charging cable to one of the jump starter's USB output ports.
2. Jumpstarteren vil automatisk begynde at oplade din enhed.
3. The 18000mAh capacity can provide multiple charges for smartphones, tablets, and other small electronics.

Figure 5: Power Bank Capabilities.

Brug af LED-lyset:

The built-in LED light offers multiple modes for different situations.

1. Locate the power button for the LED light (often integrated with the main power button or a dedicated light button).
2. Press and hold the button to turn on the stable light mode.
3. Press the button again to cycle through strobe mode, SOS signal mode, and then off.

Figure 6: Four Lighting Modes.

6. Sikkerhedsfunktioner

The DBPOWER DJS90 is equipped with intelligent jumper clamps that provide multiple safety protections:

Figure 7: Smart Clamps Safety Protections.

• Lav/Høj Voltage Beskyttelse: Prevents damage from incorrect voltage niveauer.
• Overtemperaturbeskyttelse: Shuts down if the device gets too hot.
• Kortslutningsbeskyttelse: Forhindrer skader fra utilsigtede kortslutninger.
• Omvendt polaritetsbeskyttelse: Alerts and prevents operation if clamps er forbundet forkert.
• Jump Starter Time-Out Protection: Automatically shuts off after a period of inactivity to conserve power.

7. Vedligeholdelse

• Genoplad regelmæssigt: For optimal performance and longevity, fully recharge the jump starter after each use and at least every three months if stored.
• Opbevaring: Store the device in its hard shell case in a cool, dry place, away from direct sunlight and extreme temperatures.
• Rensning: Wipe the unit and clamps with a dry, soft cloth. Do not use harsh chemicals or abrasive materials.

8. Fejlfinding

• Køretøjet starter ikke: Sørg for, at clamps are securely connected to the correct battery terminals. Check the jump starter's battery level. If the intelligent clamps' indicator light is not solid green, refer to the manual for specific error codes or try reconnecting.
• Jump Starter Not Charging: Verify the charging cable and adapter are working correctly. Ensure the charging port on the jump starter is clean and free of debris.
• LED lys virker ikke: Check if the jump starter is powered on. Press and hold the light button to activate.

9. Specifikationer

10. Garanti og support

DBPOWER is committed to ensuring customer satisfaction. If you have any questions or require assistance with your product, please do not hesitate to contact our customer support team. We aim to respond to all inquiries within 24 hours.

For support, please visit the official DBPOWER webwebstedet eller se kontaktoplysningerne på din produktemballage.