AsperX AX260 3000A Jumpstarter med luftkompressor Brugermanual

1. Sikkerhedsoplysninger

Læs alle sikkerhedsadvarsler, instruktioner, illustrationer og specifikationer, der følger med dette produkt. Undladelse af at følge alle instruktionerne nedenfor kan resultere i elektrisk stød, brand og/eller alvorlig personskade.

• Bær altid øjenværn, når du arbejder med batterier.
• Brug ikke jumpstarteren, hvis den er beskadiget.
• Hold jumpstarteren væk fra børn.
• Udsæt ikke produktet for regn eller våde forhold.
• Ensure proper polarity connection (red to positive, black to negative) to avoid sparks or damage.
• Do not use the air compressor continuously for extended periods to prevent overheating. Allow it to cool down between uses.
• Opbevar enheden på et køligt, tørt sted væk fra direkte sollys.

2. Pakkens indhold

Bekræft at alle varer er til stede i din pakke:

• 1 x AsperX AX260 Jump Starter with Air Compressor
• 1 x Smart Jumper kabel
• 1 x USB-A til USB-C-kabel
• 1 x bæretaske
• 1 x Pump Tube
• 3 x luftdyser
• 1 x brugermanual

3. Produktet er slutview

The AsperX AX260 is a versatile device combining a powerful jump starter, an air compressor, a power bank, and an LED flashlight. It features a 3.4-inch LCD display for easy operation and monitoring.

Nøglefunktioner omfatter:

• 3000A spidsstrøm: Capable of starting 12V vehicles with up to 10L Gas and 8.0L Diesel engines.
• 150 PSI luftkompressor: Features tire pressure detection and adjustable inflation modes (PSI, BAR, KPA).
• Advanced Battery Protection System: Over 10 types of safety protections for secure operation.
• 400-Lumen LED Light: Offers constant lighting, flash, and SOS modes.
• Power Bank funktionalitet: USB-A output and USB-C input for charging electronic devices.

4. Opsætning

Before initial use, fully charge the AsperX AX260 jump starter. Use the provided USB-A to USB-C cable to charge the device. The LCD display will indicate the charging status.

5. Betjeningsvejledning

5.1. Start af et køretøj med startkabler

The AX260 can jump start 12V vehicles with up to 10L gas or 8.0L diesel engines.

1. Insert the smart jumper cable into the 12V auto start connector port on the AX260 jump starter.
2. Tilslut den røde clamp til den positive (+) pol på bilbatteriet og den sorte terminalamp til den negative (-) terminal.
3. Ensure the connections are secure. The LCD display on the jump starter will indicate correct operation. If the car battery voltage is below 0V, press the 'BOOST' button on the jump starter.
4. Start your car engine immediately.
5. Once the engine starts, remove the jumper cables from the vehicle battery, then from the jump starter.

5.2. Brug af luftkompressoren

The AX260's air compressor supports 3 optional units (PSI, BAR, KPA) and features automatic inflation stop.

1. Connect the pump tube to the air inflation opening on the AX260.
2. Attach the appropriate air nozzle to the pump tube and secure it to the item you wish to inflate (e.g., tire valve).
3. Press the 'M' button to select the desired inflation mode (car, motorcycle, bicycle, ball).
4. Use the '+' and '-' buttons to set the target pressure.
5. Long press the 'OK' button to start inflation. The device will automatically stop once the set pressure is reached.

5.3. Powerbankens funktionalitet

The AX260 can charge various electronic devices via its USB ports.

• Connect your device's charging cable to the USB-A output port on the AX260.
• Enheden vil begynde at oplade automatisk.

5.4. LED lommelygte

The 400-lumen LED light offers multiple modes for different situations.

• Tryk på lamp switch button to cycle through the modes: constant lighting, flash, and SOS.
• Hold lamp switch button to turn off the light.

6. Vedligeholdelse

• Genoplad jumpstarteren hver 3.-6. måned, selvom den ikke er i brug, for at opretholde batteriets sundhed.
• Rengør enheden med en tør, blød klud. Brug ikke skrappe kemikalier eller slibende materialer.
• Opbevares på et køligt, tørt sted. Undgå ekstreme temperaturer.

7. Fejlfinding

• Enheden tænder ikke: Ensure the device is charged. If fully charged and still not turning on, contact customer support.
• Køretøjet starter ikke: Check that the jumper cables are correctly connected to the battery terminals. Ensure the jump starter has sufficient charge. If the battery is deeply discharged (below 0V), use the 'BOOST' function.
• Luftkompressoren puster sig ikke op: Verify the pump tube and air nozzle are securely attached. Check that the desired pressure is set and the 'OK' button is long-pressed to start. Ensure the device has sufficient charge.
• Air compressor overheating: If the air compressor becomes hot during use, allow it to cool down for several minutes before resuming operation. Continuous use for very long periods can cause overheating.
• Incorrect tire pressure reading: Ensure the air nozzle is properly sealed to the tire valve.

8. Specifikationer

9. Officielle produktvideoer

The following videos provide additional information and demonstrations of the AsperX AX260 Jump Starter with Air Compressor:

10. Garanti og support

For warranty information or technical support, please refer to the contact details provided in your product packaging or visit the official AsperX webwebsted. Gem din købskvittering for garantikrav.