1. Vigtige sikkerhedsinstruktioner
Please read and understand all instructions before beginning installation and use. Failure to follow these instructions may result in electric shock, fire, or other hazards that can cause injury or property damage.
- Professionel installation anbefales: Installationen skal udføres af en kvalificeret elektriker.
- Afbryd strømmen: Always disconnect power at the main circuit breaker or fuse box before installation, servicing, or cleaning.
- Jording: Sørg for, at armaturet er korrekt jordforbundet for at undgå potentielt elektrisk stød.
- Kun indendørs brug: Dette armatur er damp rated for indoor locations. Do not install in areas exposed to direct water or extreme humidity.
- Armaturintegritet: Du må ikke ændre, flytte eller fjerne nogen af komponenterne i armaturet.
- LED -modul: The LED module is integrated and not user-replaceable. Do not attempt to open or service the LED components.
2. Pakkens indhold
Kontroller, at alle komponenter er til stede, før du fortsætter installationen.
- Astor LED Wall Sconce Fixture (Model P5433-697-L)
- Integreret LED-modul
- Monteringsudstyr (skruer, trådmøtrikker, monteringsplade)
Figur 1: Overview of the Astor LED Wall Sconce.
3. Opsætning og installation
This fixture is designed for direct wiring to an existing junction box. Ensure power is OFF before starting.
- Forbered området: Turn off power at the circuit breaker. Clear the work area and gather necessary tools (screwdriver, wire strippers, electrical tape, safety glasses).
- Fastgør monteringsplade: Secure the mounting plate to the existing junction box using the provided screws. Ensure it is firmly attached.
- Elektriske forbindelser: Carefully connect the fixture's wires to the corresponding wires from the junction box. Use the provided wire nuts.
- Tilslut sort armaturledning til sort (varm) forsyningsledning.
- Tilslut hvid armaturledning til hvid (neutral) forsyningsledning.
- Tilslut grønt eller bart kobber armaturledning til grønt eller bart kobber (ground) supply wire.
Sørg for, at alle forbindelser er sikre, og at de er isoleret med elektrikertape, hvis det er nødvendigt.
Figure 2: Detail of the fixture's mounting base, showing connection points.
- Monter armaturet: Carefully tuck all wires into the junction box. Align the fixture with the mounting plate and secure it using the provided screws. Do not overtighten.
- Gendan strøm: Once the fixture is securely mounted, restore power at the circuit breaker.
Figur 3: Nærbillede view of the integrated LED light source within the fixture design.
4. Betjeningsvejledning
The GEORGE KOVACS Astor LED Wall Sconce operates via a standard wall switch connected to the electrical circuit. No special controls are required for basic operation.
- Tænd/sluk: Flip the wall switch connected to the fixture's circuit to turn the light on or off.
- Lysegenskaber: The integrated LED module provides 1370.3 lumens of light at a color temperature of 3000K (Soft White) with a Color Rendering Index (CRI) of 92, ensuring accurate color representation.
- Dæmpning: If connected to a compatible LED dimmer switch (sold separately), the brightness of the fixture can be adjusted. Consult the dimmer manufacturer's instructions for proper installation and use.
5. Vedligeholdelse
Regelmæssig vedligeholdelse vil bidrage til at bevare dit armaturs udseende og funktionalitet.
- Rensning: Sørg for, at strømmen er slukket, inden rengøring. Tør armaturet af med en blød, tør eller let fugtet klud.amp klud. Brug ikke slibende rengøringsmidler, opløsningsmidler eller polermidler, da de kan beskadige overfladen eller de elektriske komponenter.
- LED -modul: The LED module is designed for long-term operation (approximately 50,000 hours) and is not user-serviceable. Do not attempt to replace the LED module.
6. Fejlfinding
Hvis dit armatur ikke fungerer korrekt, kan du se følgende almindelige problemer og løsninger:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Lyset tænder ikke | Ingen strøm til armaturet | Kontroller afbryderen eller sikringen. Sørg for, at vægkontakten er i 'ON'-positionen. |
| Løse ledningsforbindelser | Turn off power at the circuit breaker. Verify all wire connections are secure. | |
| Armatur flimrer | Inkompatibel lysdæmperkontakt | Ensure you are using an LED-compatible dimmer switch. If not, replace the dimmer or remove it. |
| Løse ledningsforbindelser | Turn off power at the circuit breaker. Verify all wire connections are secure. | |
| Lysudbyttet er lavt | Lysdæmperindstilling for lav | Juster lysdæmperen til en højere indstilling. |
Hvis fejlfindingstrinene ikke løser problemet, skal du kontakte en kvalificeret elektriker eller producenten for at få hjælp.
7. Specifikationer
| Feature | Detalje |
|---|---|
| Modelnummer | P5433-697-L |
| Dimensioner (L x B x H) | 6.25 cm x 17 cm x 18.5 cm |
| Varens vægt | 2.29 pund |
| Materiale | Alloy Steel, Aluminum, Silicone |
| Finish Type | Blødt guld |
| Lyskildetype | Integreret LED |
| Antal lyskilder | 1 |
| Wattage | 24 watt |
| Lysstyrke | 1370.3 Lumens (initial) |
| Farvetemperatur | 3000 Kelvin (blød hvid) |
| Color Rendering Index (CRI) | 92 |
| Voltage | 120 volt |
| Indendørs/Udendørs brug | Indendørs (Damp Bedømt) |
| Gennemsnitligt liv | 50,000 timer |
| Certificeringer | ETL Certified, Title 24 Compliant |
| Montering påkrævet | Ja |
8. Garanti og support
This GEORGE KOVACS product is covered by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation included with your purchase or visit the official GEORGE KOVACS webwebsted.
For technical support, replacement parts, or any questions regarding the installation or operation of your Astor LED Wall Sconce, please contact GEORGE KOVACS customer service. Contact information can typically be found on the manufacturer's webwebstedet eller på din købskvittering.
