Carson X4 Quadcopter 210 LED Instruction Manual

1. Introduktion

The Carson X4 Quadcopter 210 LED is a versatile and agile remote-controlled drone designed for both beginners and experienced pilots. This model features an activatable headless function and three distinct speed levels, ensuring an enjoyable flight experience for all skill levels. Its automatic altitude control and intelligent 6-axis gyroscope provide stable flight. The X4 Quadcopter 210 also includes an acrobatic mode for performing impressive maneuvers and a convenient "Coming-Home" function to return the drone to its starting point with a single button press. Equipped with additional LED lights on the rotor arms, this quadcopter is suitable for flying even in low-light conditions or at dusk. This manual provides essential information for safe operation, setup, maintenance, and troubleshooting of your Carson X4 Quadcopter 210 LED.

2. Sikkerhedsoplysninger

Attention: Colors and technical modifications are subject to change. Not suitable for children under 8 years of age. Use only under the supervision of an adult who has read the attached instructions. Read the operating instructions together with the child before use. Use only in domestic environments (home and garden).

Mandatory insurance (prescribed by law): The operation of a remote-controlled aircraft involves certain dangers, often covered by your classic private liability insurance. Please check your insurance documents. Otherwise, it is absolutely necessary to take out adequate supplementary insurance. Adequate insurance is already available for a very low contribution.

3. Pakkens indhold

Når du åbner pakken, skal du kontrollere, at alle nedenstående komponenter er til stede og i god stand:

• Carson X4 Quadcopter 210 LED Drone
• Fjernbetjeningssender
• Rechargeable Flight Battery for Drone
• USB opladningskabel
• Reservepropeller (2 stk.)
• Lille skruetrækker
• AAA Batteries (3 pieces) for Remote Control
• Instruktionsmanual (dette dokument)

Figure 3.1: Complete package contents of the Carson X4 Quadcopter 210 LED.

4. Opsætning

4.1. Opladning af flybatteriet

1. Connect the drone's flight battery to the provided USB charging cable.
2. Sæt USB-opladerkablet i en standard USB-strømkilde (f.eks. en computers USB-port eller en USB-vægadapter).
3. The charging indicator on the USB cable will show the charging status (refer to the cable's specific indicator behavior, usually red for charging, off/green for charged).
4. Allow approximately 60-90 minutes for a full charge. Do not overcharge the battery.
5. Når batteriet er fuldt opladet, skal du frakoble det fra opladningskablet.

4.2. Isætning af batterier i fjernbetjeningen

1. Find batterirummet på bagsiden af ​​fjernbetjeningen.
2. Åbn batterirummets dæksel.
3. Isæt tre (3) AAA-batterier, og sørg for korrekt polaritet (+/-) som angivet i batterirummet.
4. Luk batterirummets dæksel forsvarligt.

4.3. Installing the Flight Battery in the Drone

1. Find batterirummet på undersiden af ​​dronen.
2. Carefully insert the fully charged flight battery into the compartment.
3. Connect the battery connector to the drone's power port. Ensure a secure connection.
4. Luk batterirummets dæksel.

4.4. Propelinstallation (hvis nødvendigt)

The drone comes with pre-installed propellers. If replacement is needed, use the provided screwdriver to remove the old propellers and install new ones, ensuring they are correctly oriented (A and B type propellers for corresponding motor arms).

5. Betjeningsvejledning

5.1. Første flyveforberedelse

1. Placer dronen på en flad, plan overflade.
2. Tænd dronens strømafbryder. LED-lysene på dronen vil blinke.
3. Turn on the remote control. The remote control's indicator light will flash.
4. To pair the drone and remote, push the left joystick (throttle) all the way up, then all the way down. The drone's lights will become solid, indicating successful pairing.
5. Perform a gyroscope calibration by placing the drone on a level surface and moving both joysticks to the bottom-right corner simultaneously until the lights flash and then become solid.

5.2. Grundlæggende kontroller og funktioner

• Start/Landing: After pairing, press the one-key take-off button (if available) or slowly push the left joystick up to take off. To land, slowly pull the left joystick down.
• Automatisk højdekontrol: Dronen opretholder sin højde automatisk, hvilket gør den nemmere at styre.
• 6-akset gyroskop: Ensures stable flight and easy maneuverability.
• Hovedløs tilstand: Activate this function to make the drone's orientation relative to the pilot, regardless of its actual front. This simplifies control for beginners. Press the headless mode button to activate/deactivate.
• Hastighedsniveauer: The drone offers three different speed levels (low, medium, high) to suit various skill levels and flying conditions. Press the speed switch button to cycle through the speeds.
• Acrobatic Mode: Perform 360-degree flips and rolls. While flying, press the acrobatic mode button, then push the right joystick in the desired direction to execute a flip.
• Coming-Home Function: With a press of the "Coming-Home" button, the drone will automatically fly back towards its take-off point. Ensure sufficient space for this maneuver.
• LED belysning: The drone is equipped with bright LED lights on its rotor arms, allowing for visibility and exciting flights during dusk or in low-light environments.

Figure 5.1: The Carson X4 Quadcopter 210 LED in flight.

Figure 5.2: The drone's LED lights in action, suitable for night flying.

5.3. Flyvetips

• Flyv altid i åbne områder fri for forhindringer, mennesker og dyr.
• Avoid flying in strong winds, rain, or extreme temperatures.
• Hold dronen inden for din synsvidde til enhver tid.
• Øv grundlæggende betjening i lav hastighedstilstand, før du forsøger dig med avancerede manøvrer.
• Monitor battery levels and land the drone before the battery is completely depleted to avoid sudden drops.

6. Vedligeholdelse

6.1. Rensning

Regularly clean the drone and remote control with a soft, dry cloth. Do not use water or chemical cleaners, as they can damage electronic components. Remove any debris from the propellers and motors.

6.2. Inspektion og udskiftning af propeller

Inspect propellers for any damage (cracks, bends, chips) before each flight. Damaged propellers can affect flight stability and safety. Replace any damaged propellers immediately using the provided spare parts and screwdriver.

6.3. Batteripleje og -opbevaring

• Always allow the battery to cool down before recharging.
• Opbevar batterier et køligt, tørt sted, væk fra direkte sollys og ekstreme temperaturer.
• Hvis batteriet opbevares i længere perioder, skal det oplades til cirka 50% kapacitet.
• Do not puncture, short-circuit, or expose batteries to fire.

7. Fejlfinding

8. Specifikationer

9. Support og garanti

Carson is committed to providing high-quality products and excellent customer satisfaction. As a specialist in remote-controlled helicopters and drones, Carson ensures exceptional quality and maximum product safety.

For any questions, technical assistance, or support regarding your Carson X4 Quadcopter 210 LED, please refer to the official Carson website or contact their customer service. Details for contacting support are typically found on the product packaging or the official brand webwebsted.

While specific warranty details are not provided in this manual, Carson products generally come with a manufacturer's warranty covering defects in materials and workmanship. Please retain your proof of purchase for warranty claims.

You can visit the Carson store on Amazon for more information and products: Carson Amazon Store.