Indledning
The Wainlux JL3 is a versatile and high-precision laser engraving and cutting machine designed for a wide range of materials. Featuring advanced compressed spot laser technology, it delivers a focused and accurate beam for detailed engraving and efficient cutting. Its robust and modular design ensures ease of assembly, maintenance, and upgrades, making it suitable for both beginners and experienced users. This manual provides essential information for safe operation, setup, and maintenance of your JL3 laser engraver.
Sikkerhedsoplysninger
Operating a laser engraving machine involves potential risks. Please read and understand all safety warnings before use.
- Øjenbeskyttelse: Always wear the provided laser safety goggles when the machine is in operation. Direct exposure to the laser beam can cause severe eye damage.
- Ventilation: Ensure adequate ventilation in your workspace. Laser engraving can produce smoke, fumes, and odors, which may be harmful if inhaled.
- Brandfare: Some materials are flammable when exposed to a laser. Do not leave the machine unattended during operation. Keep a fire extinguisher nearby.
- Materiale kompatibilitet: Only engrave or cut materials specified as safe for laser processing. Avoid materials that produce toxic fumes or are highly reflective.
- Børn og kæledyr: Hold børn og kæledyr væk fra operationsområdet.
- Strømforsyning: Use only the recommended power adapter. Disconnect power before performing any maintenance or assembly.
Image: The Wainlux JL3 laser engraver shown with a pair of laser safety goggles, emphasizing the importance of eye protection during operation.
Pakkens indhold
Når du åbner pakken, skal du kontrollere, at alle komponenter er til stede og ubeskadigede.
- Wainlux JL3 Laser Engraving Machine Frame (pre-assembled modules)
- Laser Module (40W fixed-focus)
- Strømadapter
- USB kabel
- USB Stick (containing software and drivers)
- Sikkerhedsbriller
- Brugervejledning (dette dokument)
- Small material samples for testing (e.g., wood, acrylic)
- Assembly Tools (screws, wrenches, etc.)
Opsætning og montering
The JL3 laser engraver is designed for easy assembly with most components pre-installed. Follow these steps to set up your machine:
- Udpakning: Fjern forsigtigt alle komponenter fra emballagen.
- Rammeenhed: The main frame consists of stainless steel and acrylic components. Connect the frame sections as per the diagrams in the quick start guide (usually included with the machine). Ensure all screws are tightened securely.
- Installation af lasermodul: Mount the laser module onto the designated carriage on the X-axis. Ensure it is firmly attached and the cables are properly connected. The lifting frame allows for flexible adjustment of engraving distance.
- Kabelforbindelser: Connect the power adapter to the machine and a suitable power outlet. Connect the USB cable from the machine to your computer if using a wired connection.
- Software installation: Insert the provided USB stick into your computer. Install the self-developed application or other compatible software like LaserGRBL or LightBurn. Follow the on-screen instructions for installation.
Image: A fully assembled Wainlux JL3 laser engraving machine, ready for operation, demonstrating its robust frame and laser module.
Billede: En detaljeret view of the laser module, highlighting its smoke-proof design and the ultra-fine compressed spot technology for precise engraving.
Betjeningsvejledning
The Wainlux JL3 offers flexible operation modes and wide material compatibility.
Software og forbindelse
- Understøttet software: The machine is compatible with LaserGRBL and LightBurn. A self-developed application is also provided on the USB stick, ideal for beginners.
- Forbindelse: Supports wireless data transfer via Bluetooth and wired connection via USB.
- Operativsystemer: Compatible with Windows 7/8/10, Mac, iOS, and Android.
- File Formater: Supports JPEG, BMP, GIF, PLT, PNG, DXF, JPG, XJ, and HPGL engraving file formater.
Image: Illustration showing the Wainlux JL3's compatibility with various operating systems (Windows, Android, iOS/Mac OS) and connectivity options (USB, Bluetooth, Offline Use).
Graverings- og skæreproces
- Materiale placering: Place the material to be engraved or cut within the engraving area (370 x 410 mm or 16.12 x 15.75 inches).
- Fokusjustering: Use the lifting frame to adjust the laser module's height to achieve optimal focus on the material surface.
- Designforberedelse: Indlæs dit design file into the chosen software. Adjust parameters such as laser power, speed, and number of passes according to the material and desired outcome.
- Start drift: Start graverings- eller skæreprocessen fra softwaren. Overvåg maskinen nøje under drift.
The JL3 features an improved motion algorithm and increased motor speed, reaching up to 300mm/s for faster engraving. Its 0.05mm engraving accuracy ensures high-quality results.
Image: Demonstrates the ultra-fine laser engraving capabilities of the JL3, highlighting its 80mm/s engraving speed and 0.05mm engraving accuracy with an example of detailed fur engraving.
Understøttede materialer
The JL3 can engrave and cut a wide variety of materials, including but not limited to:
- Wood (e.g., 9mm pine boards)
- Bambus
- Læder
- Akryl
- Rustfrit stål
- Other Metals (e.g., aluminum oxide)
- Kredsløb
- Glas
- Paper, Cardboard
- Stof
Image: Visual representation of the JL3's capability to cut 9mm wood with minimal burnt edges and directly engrave stainless steel/metal surfaces.
Opretholdelse
Regular maintenance ensures optimal performance and extends the lifespan of your JL3 laser engraver.
- Rengøring af linsen: Periodically clean the laser lens with a soft, lint-free cloth and lens cleaning solution. A dirty lens can reduce laser power and engraving quality.
- Rengøring af maskinen: Wipe down the machine frame and rails to remove dust and debris. Keep the engraving area clear.
- Smøring: Apply a small amount of lubricant to the guide rails and moving parts as needed to ensure smooth operation.
- Firmwareopdateringer: Check for and install any available firmware updates to ensure your machine has the latest features and performance improvements.
Fejlfinding
Dette afsnit omhandler almindelige problemer, du kan støde på.
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Laseren udløses ikke eller har svagt output | Loose cable connection, dirty lens, incorrect focus, low power setting. | Check all connections. Clean the laser lens. Adjust focus. Increase laser power in software. |
| Maskinen opretter ikke forbindelse til computeren | Incorrect USB port, driver issue, Bluetooth not paired. | Try a different USB port. Reinstall drivers. Ensure Bluetooth is enabled and paired correctly. |
| Engraving quality is poor/inconsistent | Forkerte hastigheds-/effektindstillinger, materialet er ikke plant, snavset linse, løse remme. | Adjust speed and power settings. Ensure material is flat and secured. Clean lens. Check and tighten belts. |
| Maskinen laver usædvanlige lyde | Lack of lubrication, debris on rails, loose components. | Lubricate rails. Clean rails. Check for and tighten any loose screws. |
Specifikationer
| Feature | Detalje |
|---|---|
| Modelnavn | JL3 |
| Mærke | Wainlux |
| Laser Power | 5W (Optical Output), 40W (Machine Power) |
| Graveringsområde | 370 x 410 mm (ca. 16.12 x 15.75 tommer) |
| Graveringsnøjagtighed | 0.05 mm |
| Graveringshastighed | Op til 300 mm/s |
| Forbindelse | USB, Bluetooth |
| Kompatible operativsystemer | Windows 7/8/10, Mac, iOS, Android |
| Understøttet File Formater | JPEG, BMP, GIF, PLT, PNG, DXF, JPG, XJ, HPGL |
| Produktdimensioner | 60.5 x 60.3 x 15.6 cm |
| Varens vægt | 2.65 kg |
| Rammemateriale | Stainless Steel, Acrylic |
Garanti og support
Wainlux provides comprehensive support for your JL3 laser engraving machine.
- Garanti: A two-year warranty service is provided for machines purchased directly from the Wainlux manufacturer.
- Teknisk support: Our after-sales team is available to respond to your email inquiries within 24 hours.
- Returnerer: We support unreasonable returns for 30 days, including replacement of spare parts and replacement of new machines (for non-human caused failures).
For technical assistance or warranty claims, please contact Wainlux customer support through the contact information provided on their official webwebsted eller din købsplatform.
