GeekTale F02-02 Smart Deadbolt Brugermanual

1. Introduktion

This manual provides comprehensive instructions for the installation, operation, and maintenance of your GeekTale F02-02 Smart Deadbolt. Please read this manual thoroughly before installation and use to ensure proper function and safety.

The GeekTale F02-02 is a 4-in-1 keyless entry door lock offering multiple access methods: fingerprint, keypad passcode, Bluetooth app control, and traditional physical keys. It is designed for enhanced security and convenience in residential settings.

2. Pakkens indhold

Kontroller, at alle komponenter er til stede, før installationen påbegyndes.

• GeekTale F02-02 Smart Deadbolt (Exterior and Interior Assemblies)
• Mounting Hardware (Screws, Bolts)
• Slagplade og forstærkningsplade
• Fysiske nøgler (2)
• Installationsskabelon
• Brugermanual

3. Specifikationer

4. Installation

The GeekTale F02-02 Smart Deadbolt is designed for easy installation and can replace most existing deadbolts. Ensure your door meets the specifications outlined in Section 3 before proceeding.

4.1 Forberedelse

• Nødvendige værktøjer: Phillips head screwdriver, measuring tape.
• Dørkompatibilitet: Ensure your door thickness is between 1-3/8" (35mm) and 2-1/8" (54mm). The door hole diameter should be 2-1/8" (54mm). The backset (distance from door edge to center of bore hole) should be 2-3/4" (70mm) or 2-3/8" (60mm).
• Bestem dørhåndtering: The lock is reversible for left-handed and right-handed doors.

4.2 Trin-for-trin installation

1. Fjern eksisterende deadbolt: Skru din nuværende dødbolt af døren og fjern den.
2. Installer låsebolten: Insert the new latch bolt into the door edge. Ensure the "UP" arrow on the latch bolt faces upwards. Secure with screws.
3. Installer udvendig samling: Feed the cable from the exterior keypad unit through the door hole. Align the exterior unit with the latch bolt and secure it to the door.
4. Installer indvendig monteringsplade: Route the cable through the mounting plate. Secure the mounting plate to the exterior assembly using the provided screws.
5. Connect Cable and Install Interior Assembly: Connect the cable from the exterior unit to the interior unit's port. Ensure the thumb-turn spindle is correctly aligned with the latch bolt mechanism. Secure the interior assembly to the mounting plate with screws.
6. Installer låseplade: Install the strike plate and reinforcement plate on the door frame, aligning them with the latch bolt.
7. Indsæt batterier: Open the battery cover on the interior unit and insert 4 AA alkaline batteries (not included). Close the cover.
8. Test drift: Manually test the deadbolt by rotating the thumb-turn. Ensure it extends and retracts smoothly.

5. Betjeningsvejledning

The GeekTale F02-02 Smart Deadbolt offers multiple ways to lock and unlock your door.

5.1 Første opsætning og app-parring

1. Download app: Søg efter the "GeekTale" app in your smartphone's app store (iOS/Android).
2. Opret konto: Følg instruktionerne i appen for at oprette en brugerkonto.
3. Tilføj enhed: In the app, select "Add Device" and follow the prompts to pair your smart deadbolt via Bluetooth. Ensure Bluetooth is enabled on your phone and you are within range of the lock.
4. Indstil administrator: The first fingerprint or passcode registered through the app will typically be designated as the administrator.

5.2 Oplåsningsmetoder

• Lås op med fingeraftryk: Place your registered finger on the fingerprint sensor on the exterior unit. The lock will unlock if the fingerprint is recognized.

  

• Oplåsning med adgangskode: Enter your registered 6-digit passcode on the keypad. The lock will unlock upon correct entry.

  

• App Bluetooth Unlock: Open the GeekTale app on your smartphone, ensure Bluetooth is active, and tap the unlock icon.
• Physical Key Unlock: In case of battery depletion or electronic malfunction, use the provided physical keys to unlock the deadbolt.

5.3 Låsemetoder

• Autolås: The lock can be configured via the app to automatically lock after a set period (e.g., 5-60 seconds) once unlocked.

  

• Lås med et enkelt tryk: Press the '#' key on the keypad to manually lock the door from the outside.
• App Bluetooth Lock: Open the GeekTale app on your smartphone and tap the lock icon.
• Manual Lock (Interior): Rotate the thumb-turn on the interior unit to lock the door.

5.4 App funktioner

• Brugeradministration: Add, modify, or delete fingerprints and passcodes for up to 20 family members.
• Adgangslog: View a history of lock and unlock events, including method and user.
• Midlertidige adgangskoder: Generate one-time or time-limited passcodes for guests or service providers.
• Lydløs tilstand: Enable or disable sound feedback from the lock for quiet operation.
• Advarsel om lavt batteri: Modtag notifikationer, når batteriniveauet er lavt.
• Auto-Lock Timer: Adjust the duration for the auto-lock feature.

6. Vedligeholdelse

• Udskiftning af batteri: Replace all 4 AA batteries when the low battery alert is triggered. Use only new, high-quality alkaline batteries. Do not mix old and new batteries or different battery types.
• Rensning: Clean the lock's exterior surfaces with a soft, dry cloth. Avoid abrasive cleaners or solvents that could damage the finish or electronic components.
• Fingeraftrykssensor: Keep the fingerprint sensor clean and dry for optimal performance.
• Nødkraft: If batteries deplete completely, connect a USB-C power bank to the emergency power port on the exterior unit to temporarily power the lock and gain access.

7. Fejlfinding

8. Garanti og support

GeekTale provides localized after-sales customer service. For any issues or questions regarding your product, please contact GeekTale customer support through the official channels. Refer to your purchase documentation for specific warranty terms and contact information.

Kontaktoplysninger: Besøg venligst GeekTale Store on Amazon or refer to the contact details provided with your product packaging.