GAOMON Full Size Velvet Button Tufted Bed Frame with Headboard

Indledning

This manual provides comprehensive instructions for the assembly, operation, maintenance, and troubleshooting of your GAOMON Full Size Velvet Button Tufted Bed Frame, Model SBH01DF. Please read this manual thoroughly before assembly and retain it for future reference.

Image: The GAOMON Full Size Velvet Button Tufted Bed Frame, featuring a grey velvet headboard and footboard with button tufting, supported by a gold-finished metal frame, shown in a bedroom setting.

Sikkerhedsoplysninger

• Sørg for, at alle dele er til stede og ubeskadigede, før monteringen påbegyndes.
• Saml sengerammen på en blød, ren overflade for at forhindre ridser.
• Do not overtighten screws during assembly to avoid stripping threads.
• Kontrollér regelmæssigt alle forbindelser for at sikre, at de forbliver stramme og sikre.
• Overskrid ikke den maksimale vægtkapacitet på 800 lbs.
• Hold små dele væk fra børn under montering.

Reservedelsliste

Before assembly, verify that all components listed below are included in your package:

• A. Headboard Panel (1)
• B. Footboard Panel (1)
• C. Sideskinner (2)
• D. Center Support Beam (1)
• E. Metal Slats (approx. 12-14)
• F. Support Legs (4-6, including center leg)
• G. Hardware Pack (Screws, Washers, Allen Wrench) (1)

Billede: Detaljeret view of the bed frame's structural components, including strong support slats, sound-absorbing sponge for noise reduction, robust bed legs, and floor protection feet.

Opsætning og montering

Følg disse trin for korrekt montering. Det anbefales at være to personer til monteringen.

1. Udpak komponenter: Carefully remove all parts from the packaging and lay them out on a clean, soft surface. Identify each component using the parts list.
2. Fastgør sideskinner til hovedgærde: Connect the side rails (C) to the headboard panel (A) using the provided screws and Allen wrench from the hardware pack (G). Ensure connections are secure but do not fully tighten yet.
3. Fastgør sideskinner til fodbræt: Connect the other end of the side rails (C) to the footboard panel (B). Again, secure with screws but do not fully tighten.
4. Installer centerstøttebjælke: Attach the center support beam (D) to the designated brackets on the headboard and footboard. Ensure it is centered and level.
5. Placering af metallameller: Position the metal slats (E) across the side rails, ensuring they are evenly spaced and securely fastened to the frame. The design provides sufficient support without a box spring.
6. Installer støtteben: Attach any additional support legs (F) to the center beam or other designated areas as per the included diagram.
7. Endelig stramning: Once all components are in place and aligned, systematically tighten all screws and bolts until secure. Do not overtighten.

Image: Diagram illustrating the full dimensions of the bed frame (78.3"L x 53.9"W x 46"H) and its maximum weight capacity of 800 lbs.

Betjeningsvejledning

The GAOMON bed frame is designed for use with a mattress directly on its steel slat support system, eliminating the need for a box spring.

• Madrasplacering: Carefully place your full-size mattress onto the assembled slat system. Ensure the mattress is centered and fully supported by the frame.
• Vægtfordeling: Distribute weight evenly across the bed frame. The maximum weight capacity is 800 lbs, including the mattress and occupants.
• Opbevaring under sengen: The frame provides approximately 12.6 inches of clearance for under-bed storage. Utilize this space for bins or boxes as needed.

Image: The GAOMON bed frame positioned in a bedroom, showcasing its design and the available space underneath for storage baskets.

Billede: View showing the under-bed clearance of 12.6 inches, suitable for storage containers, with the overall frame height of 17.7 inches from the floor to the top of the side rail.

Opretholdelse

• Rengøring af rammen: Wipe metal surfaces with a soft, damp klæde. Undgå slibende rengøringsmidler.
• Cleaning the Velvet Headboard/Footboard: For light cleaning, use a soft brush or vacuum with an upholstery attachment. For spills, blot immediately with a clean, dry cloth. Do not rub. For stubborn stains, consult a professional upholstery cleaner.
• Hardwarekontrol: Periodically (every 3-6 months) check all bolts and screws to ensure they are tight. Retighten if necessary to maintain stability and prevent noise.

Billede: Nærbillede view of the grey velvet button-tufted headboard, highlighting the fabric texture and button details, demonstrating the quality of the upholstery.

Fejlfinding

Specifikationer

• Model: SBH01DF
• Størrelse: Fuld
• Produktmål (L x B x H): 78.3 cm x 53.9 cm x 46 cm
• Materiale: High-quality metal frame, Velvet upholstery
• Farve: Grå
• Vægt kapacitet: 800 lbs
• Varens vægt: 80 pund
• Særlige funktioner: No Box Spring Needed, Squeak Resistant design
• Montering påkrævet: Ja
• Headboard Thickness: 1.4 inches (soft package)
• Udsalg under sengen: 12.6 tommer

Image: Close-up showing the soft package thickness of the headboard, measured at 1.4 inches, indicating comfortable padding and construction detail.

Garanti og support

GAOMON products are manufactured with quality and durability in mind. While specific warranty terms may vary, GAOMON typically offers support for manufacturing defects. For detailed warranty information or to report missing/damaged parts, please contact GAOMON customer service.

Kundesupport: For assistance, please refer to the contact information provided with your purchase or visit the official GAOMON website. Please have your model number (SBH01DF) and purchase details ready when contacting support.