SUBZERO trådløst dobbelt digitalt mikrofonsystem brugermanual

1. Introduktion

This manual provides essential information for the safe and efficient operation of your SUBZERO Wireless Dual Digital Microphone System. Please read this manual thoroughly before use and retain it for future reference.

The SUBZERO Wireless Dual Digital Microphone System offers crystal-clear wireless audio with two handheld microphones, operating within the 2.4GHz frequency band. It features quick setup and a reliable range of up to 30 meters.

2. Sikkerhedsoplysninger og advarsler

ADVARSEL! To reduce the risk of electric shock, fire, or damage to the unit, always observe the following precautions:

• Må ikke åbnes. Ingen dele indeni, der kan repareres af brugeren. Overlad service til kvalificeret servicepersonale.
• Do not place this product in a location near a heat source such as a radiator, or in an area subject to direct sunlight, excessive dust, mechanical vibration or shock.
• Produktet må ikke udsættes for dryp eller sprøjt, og der må ikke placeres genstande fyldt med væske, såsom vaser, på produktet.
• Der må ikke placeres kilder med åben ild, såsom tændte stearinlys, på produktet.
• Vær opmærksom på miljøaspekterne ved bortskaffelse af batterier.
• The product is designed for use in moderate climates.
• Brug kun tilbehør/tilbehør specificeret af producenten.
• Træk stikket ud af dette apparat under tordenvejr, eller når det ikke skal bruges i længere perioder.
• Overlad al service til kvalificeret servicepersonale. Service er påkrævet, når apparatet er blevet beskadiget på nogen måde, såsom strømforsyningsledning eller stik er beskadiget, væske er blevet spildt, eller genstande er faldet ind i apparatet, apparatet har været udsat for regn eller fugt, ikke fungerer normalt , eller er blevet droppet.

FORSIGTIGHED! Risiko for eksplosion, hvis batteriet udskiftes med en forkert type. Bortskaf brugte batterier i henhold til instruktionerne.

3. Pakkens indhold

Verify that all components are present and in good condition upon opening the package. The typical package includes:

• 1 x trådløs modtagerenhed
• 2 x håndholdte mikrofoner
• 1 x strømadapter
• 1 x Audio Cable (e.g., 6.35mm Jack to Jack)
• Brugermanual

4. Produktfunktioner

• Two digital wireless microphones with balanced XLR and Jack outputs.
• 16 channels within the 2.4GHz frequency band for enhanced flexibility.
• Quick setup with hassle-free infrared pairing.
• Crystal-clear wireless audio up to a 30-meter range, free from interference.

5. Opsætningsvejledning

5.1 Modtagerplacering

Place the receiver unit on a stable, flat surface, away from sources of interference such as Wi-Fi routers, microwave ovens, or large metal objects. Ensure adequate ventilation around the unit.

Billede: Forside view of the SUBZERO wireless receiver with two antennas and two handheld microphones. The receiver displays channel and frequency information.

5.2 Tilslutning af modtageren

1. Connect the included power adapter to the DC 12V input on the rear of the receiver and plug it into a power outlet.
2. Connect the receiver's audio output (XLR or 6.35mm Jack) to your mixer, amplifier, or audio interface using an appropriate audio cable.


Billede: Bagside view of the SUBZERO wireless receiver, showing balanced XLR outputs for Channel A and Channel B, a mixed output jack, and the DC 12V power input. Antennas are visible on both sides.

5.3 Installation af mikrofonbatteri

Unscrew the bottom part of each handheld microphone to access the battery compartment. Insert two AA batteries (not included) into each microphone, ensuring correct polarity.

Image: Close-up of a SUBZERO handheld microphone, showing the display screen, power button, and a distinctive yellow base.

6. Betjeningsvejledning

6.1 Tænd

1. Press the power button on the receiver unit. The display will illuminate.
2. Press and hold the power button on each handheld microphone until its display illuminates.

6.2 Infrared Pairing

The system uses infrared (IR) pairing for quick and automatic synchronization between the receiver and microphones.

1. On the receiver, select the desired channel for pairing (e.g., Channel A or B).
2. On the microphone, activate the IR pairing mode (refer to the microphone's small display for instructions, usually by pressing a button near the IR sensor).
3. Align the IR sensor on the microphone with the IR window on the receiver (usually near the display). The devices will automatically sync.
4. Repeat for the second microphone.

6.3 Justering af lydstyrke

Use the dedicated volume knobs on the receiver for Channel A and Channel B to adjust the output level of each microphone independently.

Billede: Forside view of the SUBZERO wireless receiver, highlighting the power switch, volume controls for Channel A and B, and the central display showing frequency and channel information.

6.4 Kanalvalg

If you experience interference, you can change the operating channel. Use the channel selection buttons on the receiver to cycle through the available 16 channels. Ensure the paired microphone also updates to the new channel via IR pairing if necessary.

7. Vedligeholdelse

• Rensning: Use a soft, dry cloth to clean the receiver and microphones. Do not use abrasive cleaners, solvents, or waxes.
• Opbevaring: When not in use for extended periods, store the system in a cool, dry place, away from direct sunlight and extreme temperatures. Remove batteries from microphones before storage to prevent leakage.
• Udskiftning af batteri: Replace microphone batteries when the low battery indicator appears on the microphone display or when audio quality degrades.

8. Fejlfinding

9. Specifikationer

10. Garanti og support

For warranty information and technical support, please refer to the documentation provided with your purchase or contact the manufacturer directly. Details can often be found on the manufacturer's official webhjemmeside eller gennem din forhandler.

Fabrikant: SubZero Store