Timex T100 Black PU Strap Watch

1. Introduktion

Thank you for choosing the Timex T100 Black PU Strap Watch, Model TW5M58400SO. This analog-digital timepiece is designed for an active lifestyle, offering a robust set of features in a durable construction. Please read this manual carefully to understand the full capabilities of your watch and ensure proper operation and maintenance.

Figur 1: Forside view of the Timex T100 Black PU Strap Watch.

2. Nøglefunktioner

• 40mm Matte Black Resin Case: Holdbart og let design.
• Digital Dial: Klart og letlæseligt digitalt display.
• Sports Stopwatch with 150-Lap Memory: Track your performance with precision.
• Nedtællingstimer: Useful for various activities.
• Alarm: Daily alarm function for reminders.
• Black Rubber Strap: Comfortable and resilient for everyday wear.
• INDIGLO® lysende urskive: Giver belysning under forhold med svagt lys.
• Water Resistant up to 50 meters (164 feet): Suitable for short periods of recreational swimming, but not diving or snorkeling.

Figure 2: Timex durability features, including scratch-resistant mineral glass.

3. Opsætning

3.1 Initial Setup and Battery

Your Timex T100 watch comes with a pre-installed Lithium Metal battery (CR2025). The watch should be ready for use upon arrival. If the display is dim or blank, the battery may need replacement. Refer to the Maintenance section for battery replacement instructions.

Figure 3: Watch back indicating CR2025 cell and 50m water resistance.

3.2 Indstilling af tid og dato

The Timex T100 features four buttons: RST/STP (Reset/Stop), ST/LAP (Start/Lap), MODE, og INDIGLO. The exact procedure for setting time and date may vary slightly by specific firmware version, but generally follows these steps:

1. Fra den normale tidsvisning skal du trykke på MODE button repeatedly until you reach the Time Set mode (often indicated by flashing digits).
2. Brug ST/LAP button to advance the flashing digit (hours, minutes, year, month, day).
3. Brug RST/STP knappen for at gå til næste indstilling (f.eks. fra timer til minutter).
4. Når alle indstillinger er korrekte, skal du trykke på MODE button to exit Time Set mode and return to the normal time display.

4. Betjeningsvejledning

4.1 Tilstandsnavigation

Tryk på MODE button to cycle through the different functions of the watch. The typical sequence is: Time & Date → Stopwatch → Countdown Timer → Alarm → Dual Time (if applicable) → Time & Date.

4.2 Kronograf (Stopur)

Sådan bruger du stopursfunktionen:

1. Trykke MODE until the stopwatch display appears (usually showing 00:00:00).
2. Trykke ST/LAP for at starte stopuret.
3. Trykke ST/LAP igen for at sætte stopuret på pause.
4. Trykke RST/STP for at nulstille stopuret.
5. Tryk på, mens stopuret kører RST/STP to record a lap time. The lap time will display briefly, and the stopwatch will continue running in the background.

4.3 Alarm

Sådan indstiller og aktiverer du alarmen:

1. Trykke MODE indtil alarmdisplayet vises.
2. Tryk og hold RST/STP (or a dedicated set button if present) to enter alarm setting mode.
3. Bruge ST/LAP for at justere den blinkende time eller minut.
4. Bruge RST/STP to move between hour and minute settings.
5. Once the alarm time is set, press MODE at forlade.
6. For at tænde/slukke alarmen, tryk på ST/LAP while in the alarm display mode. An alarm icon will typically appear when the alarm is active.

4.4 INDIGLO® Natlampe

For at aktivere INDIGLO®-natlyset skal du trykke på INDIGLO button (usually located on the top right or bottom right of the watch case). The entire watch face will illuminate for easy viewunder dårlige lysforhold.

5. Vedligeholdelse

5.1 Vandtæthed

Dette ur er vandtæt ned til 50 meter (164 fod). Denne klassificering betyder, at det er egnet til korte perioder med rekreativ svømning. Det er ikke suitable for diving, snorkeling, or high-impact water sports. Do not press any buttons while the watch is submerged, as this can compromise the water resistance.

5.2 Rengøring

For at rengøre dit ur skal du tørre det af med en blød kludamp cloth. For the resin strap, mild soap and water can be used, but ensure no soap residue remains. Avoid using harsh chemicals or abrasive materials, as these can damage the watch case or strap.

5.3 Udskiftning af batteri

The Timex T100 uses a CR2025 Lithium Metal battery. When the display becomes dim or the watch stops functioning, it is likely time for a battery replacement. It is recommended to have the battery replaced by a qualified watch technician to ensure the water resistance seal is properly re-seated. If replacing yourself, carefully remove the back cover, replace the battery with the correct polarity, and ensure the gasket is clean and properly positioned before re-securing the back cover.

6. Fejlfinding

7. Specifikationer

8. Garanti og support

Timex watches are manufactured to high standards and come with a limited warranty against manufacturing defects. For specific warranty terms and conditions, please refer to the warranty card included with your purchase or visit the official Timex webwebsted.

For customer support, service, or to find authorized service centers, please visit the Timex website or contact Timex customer service directly. You can also visit the official Timex store on Amazon for more product information and support resources:

Besøg Timex-butikken på Amazon