Pro-Ject VC-S3 Premium Record Cleaning Machine User Manual

Indledning

The Pro-Ject VC-S3 is a premium record cleaning machine designed to effectively remove dirt, dust, and static from your vinyl records, ensuring optimal playback quality and longevity. This manual provides essential information for the proper setup, operation, maintenance, and troubleshooting of your VC-S3 unit.

Pro-Ject VC-S3 Premium Record Cleaning Machine, angled view

Billede: Vinklet view of the Pro-Ject VC-S3 Premium Record Cleaning Machine, showcasing its silver finish and compact design. A record is placed on the platter with the vacuum arm positioned over it.

Produktegenskaber

Superfast & super strong cleaning: Efficiently cleans records with powerful vacuum suction.
Completely dry record within 2 rotations: Designed for rapid drying, allowing immediate playback.
Big 2.5l tank for vacuumed cleaning liquid: Large capacity waste fluid tank for extended use.
Removes static load of vinyl records: Helps eliminate static electricity that attracts dust.
Removes cleaning fluid (Wash it) residue free: Ensures no residue is left on the record surface after cleaning.

Opsætning

Udpakning: Carefully remove the VC-S3 unit and all accessories from its packaging. Retain packaging for future transport or storage.
Placering: Place the machine on a stable, level surface away from direct sunlight, heat sources, and excessive dust. Ensure adequate ventilation around the unit.
Strømtilslutning: Connect the provided power cable to the VC-S3 and then to a suitable wall outlet. Ensure the power switch is in the "Off" position before connecting.
Væskeforberedelse: Prepare your record cleaning fluid according to its manufacturer's instructions. Pro-Ject recommends using their "Wash it" cleaning fluid for optimal results.

Top view of Pro-Ject VC-S3 with a record on the platter

Billede: Top-down view of the Pro-Ject VC-S3, showing a vinyl record placed on the central spindle and the vacuum arm positioned to the right.

Betjeningsvejledning

Follow these steps for effective record cleaning:

Stedrekord: Carefully place the record onto the spindle, ensuring it sits flat. Secure it with the record clamp.
Apply Fluid: Apply a small amount of cleaning fluid evenly across the record surface. Use a dedicated brush (not included) to gently spread the fluid.
Startmotor: Flip the "MOTOR" switch to the "I" position to start the platter rotation. Allow the fluid to work for a few rotations.
Engage Vacuum: Flip the "VACUUM" switch to the "I" position to activate the vacuum suction. The vacuum arm will draw the fluid and contaminants from the record surface.
Dry Record: Allow the vacuum to operate for 1-2 rotations (approximately 2 seconds) until the record surface appears dry. For heavily soiled records, a second application and vacuum cycle may be necessary.
Stop drift: First, flip the "VACUUM" switch to "O", then the "MOTOR" switch to "O".
Remove Record: Carefully remove the record clamp and then the cleaned record.

Close-up of the motor and vacuum switches on the Pro-Ject VC-S3

Billede: Nærbillede view of the two toggle switches on the side of the Pro-Ject VC-S3, labeled "MOTOR" and "VACUUM", indicating their on/off positions.

Opretholdelse

Tøm affaldsbeholder: Regularly check and empty the waste fluid tank. The tank is located at the bottom of the unit. Refer to the diagram in the full manual for exact location and removal instructions. Dispose of waste fluid responsibly.
Clean Vacuum Arm: Periodically inspect the felt strips on the vacuum arm for wear or debris. Clean them gently with a damp cloth. Replace worn strips to maintain optimal suction.
Udvendig rengøring: Clean the exterior of the machine with a soft, dry cloth. Do not use abrasive cleaners or solvents.
Opbevaring: When not in use for extended periods, disconnect the power and store the unit in a dry, dust-free environment.

Fejlfinding

Problem	Mulig årsag	Løsning
Record not drying completely or wet streaks remain.	Insufficient vacuum time. Worn or dirty vacuum arm felt strips. Waste tank is full. Record warpage preventing full contact.	Increase vacuum time to 2-3 rotations. Clean or replace felt strips. Empty the waste tank. Ensure record is as flat as possible; apply gentle pressure to the vacuum arm if necessary (with caution).
Maskinen tænder ikke.	Strømkabel ikke tilsluttet. Ingen strøm fra stikkontakten.	Kontroller strømkablets forbindelse til enheden og stikkontakten. Test stikkontakten med en anden enhed.
Motor or vacuum not engaging.	Switches not fully engaged. Intern fejl.	Ensure switches are firmly in the "I" position. Hvis problemet fortsætter, skal du kontakte kundesupport.

Specifikationer

Modelnavn: VC-S3
Varemodelnummer: 9120122295748
Mærke: Projekt
Farve: Sølv
Produktdimensioner: 20 x 18 x 18 tommer (længde x bredde x højde)
Varens vægt: 19.41 pund
Strømkilde: Elektrisk med ledning
Affaldsbeholderkapacitet: 2.5 liter (ca.)

Garanti og support

Specific warranty terms and detailed support contact information are not provided in this document. For warranty claims, technical support, or service inquiries, please refer to the official Pro-Ject Audio Systems webwebstedet eller kontakt din autoriserede forhandler. Gem din købsbevis af garantihensyn.

You can visit the official Pro-Ject store on Amazon for more information: Pro-Ject Audio Systems Store

	Pro-Ject VC-S2 ALU Pladerensningsmaskine Brugsanvisning Dette dokument indeholder instruktioner til brug, opsætning, vedligeholdelse og fejlfinding af Pro-Ject VC-S2 ALU-pladerensemaskinen. Det indeholder sikkerhedsforanstaltninger, komponentbeskrivelser og garantioplysninger.
	Pro-Ject T1, T1 Phono SB, T1 BT pladespiller brugermanual og opsætningsvejledning Omfattende instruktioner til opsætning, betjening og vedligeholdelse af dine Pro-Ject T1-, T1 Phono SB- og T1 BT-pladespillere. Indeholder tekniske specifikationer, fejlfinding og garantioplysninger.
	Pro-Ject A1 pladespiller: Brugermanual, opsætning og specifikationer Omfattende instruktioner til opsætning, betjening og vedligeholdelse af din Pro-Ject A1 pladespiller. Indeholder tekniske specifikationer, fejlfindingstips og garantioplysninger.
	Pro-Ject X8 B pladespiller: Brugsanvisning, opsætning og specifikationer Omfattende guide til Pro-Ject X8 B pladespilleren, der dækker opsætning, installation, betjening, vedligeholdelse, tekniske specifikationer, fejlfinding og garantioplysninger.
	Pro-Ject A1 Pladespiller Brugermanual Brugsanvisning og opsætning af Pro-Ject A1 pladespilleren, inklusive tekniske specifikationer, vedligeholdelse og fejlfinding.
	Vejledning til pleje af Pro-Ject Phono-patron og pen Lær, hvordan du plejer din Pro-Ject phono-pickup, herunder rengøring af stylus, rengøring af plader med Pro-Ject Brush-it og udskiftning af stylus. Denne vejledning dækker de vigtigste dele af en phono-pickup og giver instruktioner til vedligeholdelse.

Pro-Ject VC-S3 (Model 9120122295748)