Xigmatek Blade Computer Case User Manual

1. Introduktion

Thank you for choosing the Xigmatek Blade ATX Computer Case. This manual provides essential information for the proper installation, operation, and maintenance of your new computer chassis. The Xigmatek Blade is designed for high-performance PC builds, featuring a spacious ATX structure, a stylish tempered glass side panel, and efficient cooling with pre-installed 120mm fans.

2. Sikkerhedsoplysninger

Please read and understand all safety instructions before installing or operating the computer case. Failure to do so may result in personal injury or damage to the product.

• Frakobl altid strømforsyningen fra stikkontakten, før du udfører installation eller vedligeholdelse inde i kabinettet.
• Be aware of sharp edges inside the chassis. Handle components with care to avoid cuts.
• Brug en antistatisk håndledsrem, når du håndterer interne komponenter, for at forhindre skader forårsaget af elektrostatisk udladning (ESD).
• Sørg for tilstrækkelig ventilation omkring kabinettet for at forhindre overophedning.
• Keep the case away from liquids, excessive heat, and direct sunlight.

3. Pakkens indhold

Bekræft at alle varer er til stede i pakken:

• Xigmatek Blade ATX Computer Case
• Tilbehørsæske (indeholder skruer, afstandsstykker, kabelbindere osv.)
• Brugervejledning (dette dokument)

4. Opsætning og installation

Follow these steps for proper assembly and installation of your PC components into the Xigmatek Blade case.

4.1. Forberedelse

• Unpack the case carefully and place it on a stable, flat surface.
• Gather necessary tools: Phillips head screwdriver, cable ties (some included), anti-static wrist strap.

Figur 1: Forside view of the Xigmatek Blade ATX Computer Case, showcasing the tempered glass panel and three front-mounted RGB fans, along with a single rear RGB fan.

4.2. Installation af bundkort

1. Installer I/O-skjoldet i den bageste åbning af kabinettet.
2. Align the motherboard with the pre-installed standoffs. Ensure the standoffs match your motherboard's form factor (Micro ATX compatible).
3. Secure the motherboard using the provided screws. Do not overtighten.

4.3. Installation af strømforsyningsenhed (PSU)

1. Mount the PSU into the designated rear bottom compartment.
2. Fastgør strømforsyningen med skruer fra bagsiden af ​​kabinettet.
3. Route the necessary power cables through the cable management cutouts.

Figur 2: Bagside view of the Xigmatek Blade ATX Computer Case, showing the power supply mounting area, expansion slots, and the exhaust fan.

4.4. Installation af lagerdrev

• Locate the 2.5" SSD/3.5" HDD drive bays.
• Install your storage drives using the appropriate screws.

4.5. Installation af grafikkort og udvidelseskort

1. Fjern de nødvendige PCIe-slotdæksler fra bagsiden af ​​kabinettet.
2. Insert your graphics card or other expansion cards into the motherboard's PCIe slots.
3. Fastgør kortene med skruer.

4.6. Kabelforvaltning

Brug kabelføringsudskæringerne og fastgørelsespunkterne bag bundkortbakken til at organisere kablerne. Dette forbedrer luftgennemstrømningen og æstetikken.

4.7. Tilslutninger på frontpanelet

Connect the front panel cables (Power SW, Reset SW, HDD LED, Power LED, USB 2.0/3.0, HD Audio) to the corresponding headers on your motherboard. Refer to your motherboard manual for exact pin layouts.

5. Betjening

Once all components are installed and cables are connected, you can power on your system.

• Power knap: Located on the top/front panel of the case. Press to turn on or off your PC.
• Nulstil knap: Located near the power button. Press to restart your PC.
• USB-porte: Use the front USB ports for connecting peripherals.
• Lydstik: Connect headphones and microphones to the front audio jacks.

6. Vedligeholdelse

Regelmæssig vedligeholdelse er med til at sikre optimal ydeevne og levetid for dine computerkomponenter.

• Støvfiltre: The Xigmatek Blade case may include removable dust filters (e.g., on the top, front, or bottom). Clean these filters regularly (monthly or bi-monthly) by removing them and washing with water or brushing off dust. Allow them to dry completely before re-installing.
• Indvendig rengøring: Periodically use compressed air to blow dust out of the case interior, especially from fans, heatsinks, and vents.
• Udvendig rengøring: Tør de udvendige overflader af med en blød, damp klæde. Undgå skrappe kemikalier.

7. Fejlfinding

If you encounter issues with your Xigmatek Blade case, refer to the following common troubleshooting tips:

• Ingen strøm:
  • Sørg for, at strømforsyningen er tændt og korrekt tilsluttet stikkontakten.
  • Kontroller, at kablet til strømafbryderen på frontpanelet er korrekt tilsluttet bundkortets header.
  • Kontroller alle strømforbindelser til bundkortet og komponenterne.
• Ventilatorer der ikke drejer:
  • Confirm that the fan cables are securely connected to the motherboard fan headers or a fan controller.
  • Check BIOS/UEFI settings to ensure fan control is enabled and not set to a very low RPM.
• Front Panel USB/Audio Not Working:
  • Ensure the USB and audio headers from the front panel are correctly plugged into the motherboard.
  • Check your operating system's device manager for driver issues.
• Overophedning:
  • Rengør støvfiltre og indvendige komponenter som beskrevet i afsnittet Vedligeholdelse.
  • Ensure proper airflow by checking fan orientation and cable management.
  • Consider adding more fans or upgrading your CPU cooler if temperatures remain high.

8. Specifikationer

Key specifications for the Xigmatek Blade Computer Case:

9. Garanti og support

Xigmatek products are manufactured to high-quality standards. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Xigmatek webwebsted. Gem din købsbevis til garantikrav.

For technical support or further inquiries, please contact Xigmatek customer service through their official channels. You can typically find contact information on the Xigmatek webwebsted.

Note: Specific warranty details and support contact information are not provided in this general manual. Please refer to the manufacturer's official resources.