1. Introduktion
This manual provides detailed instructions for the installation, operation, and maintenance of your SODOLA 16-Port Gigabit PoE+ Unmanaged Network Switch. This device is designed to provide reliable network connectivity and Power over Ethernet (PoE) capabilities for various network devices. Please read this manual thoroughly before using the product to ensure proper setup and functionality.
2. Produktet er slutview
2.1 Nøglefunktioner
- 18-ports Gigabit Ethernet: Features 16 Gigabit PoE ports and 2 Gigabit uplink ports. Each port supports 10/100/1000M self-adaptive, automatic negotiation in duplex mode, and Auto MDI/MDIX.
- 400W Power Budget: Supports IEEE 802.3af/at standard with an output power of 15.4W/30W per port, and a total power supply of up to 400W. This allows multiple ports to operate at full power under the AT (30W) standard.
- VLAN-tilstand: Provides fixed VLAN for port isolation, preventing communication between PoE ports while allowing communication with uplink ports to reduce network congestion.
- Plug and Play: Automatic device detection requires no configuration; simply connect the power cord and network cables.
- Universal kompatibilitet: Supports both PoE devices (e.g., IP cameras, EAPs, access points, IP phones) and Non-PoE devices (data transmission only).
- Holdbart design: Har et metal-casing, silent fanless operation, wide operating temperature range (-10°C to 50°C), and 1U rackmount capability.
- Høj ydeevne: Offers 36Gbps backplane bandwidth and 10KB Jumbo Frame support.
2.2 Pakkens indhold
- SODOLA 16-Port Gigabit PoE+ Unmanaged Network Switch
- Strømledning
- Brugervejledning (dette dokument)
Figur 1: Forside view of the SODOLA 16-Port Gigabit PoE+ Unmanaged Network Switch.
Figur 2: Overview of the switch highlighting 16 Gigabit PoE ports, 2 Gigabit uplink ports, 400W total PoE budget, 36Gbps backplane bandwidth, and 10KB Jumbo Frame support.
3. Opsætning
The SODOLA 16-Port Gigabit PoE+ Unmanaged Network Switch is designed for simple plug-and-play installation. Follow these steps to set up your device:
- Tilslut til strøm: Connect the provided power cord to the switch's power input and then to a standard AC power outlet. Ensure the power indicator light on the switch illuminates.
- Connect Uplink Ports: Connect your router or main network device to one of the two Gigabit uplink ports (labeled G1/G2) on the switch using a standard Ethernet cable. These ports are designed for high-speed connection to your core network.
- Tilslut PoE-enheder: Connect your PoE-compatible devices (e.g., IP cameras, wireless access points, IP phones) to any of the 16 PoE ports (labeled 1-16) using standard Ethernet cables. The switch will automatically detect and provide power to these devices if they are IEEE 802.3af/at compliant.
- Connect Non-PoE Devices (Optional): If you have non-PoE devices (e.g., computers, printers, NVRs) that require network connectivity but not power from the switch, you can connect them to any of the 16 PoE ports. Note that these devices will only receive data and will require their own power supply. Alternatively, an active PoE splitter can be used for non-PoE devices to receive power from the switch.
- Bekræft forbindelser: Check the LED indicators on the front panel for each connected port. A solid green or amber light typically indicates a successful link and activity.
Figure 3: Diagram illustrating the simple three-step plug-and-play setup process: Connect to Power, Connect Devices (IP Phone, IP Camera, Wireless AP, Router), and Enjoy.
Figur 4: Detaljeret view of the switch ports, including 1-16 PoE ports and G1/G2 uplink ports, along with the VLAN dipswitch.
4. Betjeningsvejledning
4.1 Grundlæggende betjening
Once the switch is powered on and devices are connected, it operates automatically. As an unmanaged switch, it requires no software configuration for basic network functionality. Data traffic will flow between connected devices and to the uplink ports.
4.2 Strøm via Ethernet (PoE)
The switch automatically detects and supplies power to IEEE 802.3af/at compliant PoE devices connected to ports 1-16. The total power budget is 400W, ensuring sufficient power for multiple devices. If a connected device is not PoE-compatible, the switch will only transmit data.
Figure 5: Illustration of the switch's compatibility with various PoE devices (IP Camera, IP Phone, Wireless AP) and Non-PoE devices (Router, Computer, NVR).
5. VLAN Mode
The SODOLA switch includes a VLAN (Virtual Local Area Network) dipswitch for port isolation. This feature enhances network security and reduces network congestion by segmenting traffic.
5.1 Enabling/Disabling VLAN Mode
Locate the VLAN dipswitch on the front panel of the switch. It typically has two positions: SLUKKET og ON.
- OFF (Default - Switch Mode): In this mode, the switch operates as a general network switch. All ports can communicate with each other, and all ports support Gigabit auto-negotiation. This is suitable for most standard network setups.
- ON (VLAN Mode): When set to ON, fixed VLANs are enabled. In this mode, the 16 PoE ports (ports 1-16) are isolated from each other. They cannot communicate directly with each other but can communicate with the uplink ports (G1/G2). This is particularly useful for security applications, such as IP camera networks, where you want to prevent devices on different PoE ports from interacting directly, thereby reducing potential network congestion and enhancing security.
Caution: Changing the VLAN mode will affect network communication between devices connected to the PoE ports. Ensure this mode is appropriate for your network configuration before enabling it.
Figure 6: Illustration of the VLAN dipswitch and the operational differences between Switch Mode (VLAN OFF) and VLAN Mode (VLAN ON).
6. Vedligeholdelse
To ensure optimal performance and longevity of your SODOLA switch, follow these maintenance guidelines:
- Rensning: Rengør regelmæssigt ydersiden af kontakten med en blød, tør klud. Brug ikke flydende rengøringsmidler eller rengøringsmidler på sprayform.
- Ventilation: Ensure the switch is placed in a well-ventilated area. Do not block the ventilation openings on the sides of the device. The fanless design relies on natural convection for cooling.
- Miljø: Operate the switch within its specified temperature and humidity ranges. Avoid exposing it to extreme temperatures, direct sunlight, or high moisture.
- Kabelstyring: Hold netværkskablerne organiseret og fri for knæk eller overdrevne bøjninger for at forhindre signalforringelse.
Figure 7: The fanless design of the switch ensures silent operation and efficient heat dissipation through ventilation.
7. Fejlfinding
If you encounter issues with your SODOLA switch, refer to the following troubleshooting tips:
- Ingen strøm: Ensure the power cord is securely connected to both the switch and the power outlet. Verify the power outlet is functional. Check the power indicator LED on the switch.
- Intet link/aktivitet: Check if the Ethernet cables are securely connected to both the switch port and the connected device. Ensure the connected device is powered on and functioning correctly. Try a different Ethernet cable or port.
- PoE-enhed modtager ikke strøm: Verify that the connected device is IEEE 802.3af/at compliant. Check the PoE status LED for the specific port. Ensure the total power consumption of all connected PoE devices does not exceed the 400W power budget.
- Network Congestion/Slow Speed: If VLAN mode is OFF, consider enabling it to isolate traffic between PoE ports, especially in networks with many devices or high traffic. Ensure all cables are Gigabit-rated for optimal performance.
- Intermitterende forbindelse: Check for loose cable connections. Ensure the switch is not overheating (though designed for wide operating temperatures, extreme conditions can affect performance).
If problems persist after attempting these steps, please contact SODOLA customer support for further assistance.
8. Specifikationer
| Feature | Specifikation |
|---|---|
| Mærke | Sodola |
| Modelnummer | 16xPoE+2GE |
| Antal havne | 18 (16 PoE, 2 Uplink) |
| Dataoverførselshastighed | 1000 megabit pr. sekund (gigabit) |
| PoE Standard | IEEE 802.3af / kl |
| Samlet PoE Power Budget | 400W |
| Interface Type | PoE |
| Etui materiale | Metal |
| Produktdimensioner | 11.81 x 8.27 x 1.81 tommer |
| Varens vægt | 5.92 pund |
| rack | 1U Rackmount |
| Kompatible enheder | Desktop, Laptop, Router, Printer, IP Camera, Access Point |
9. Sikkerhedsoplysninger
- Åbn ikke enheden casing. Der er ingen dele indeni, som kan serviceres af brugeren.
- Keep the device away from water, fire, high humidity, or hot environments.
- Sørg for, at strømforsyningen voltage opfylder de krav, der er angivet på enhedens etiket.
- Brug kun den strømadapter, der følger med enheden.
- Undgå at placere tunge genstande på kontakten.
- Disconnect the power cable before cleaning or if the device will not be used for an extended period.
10. Garanti og support
SODOLA products are designed for reliability and performance. This product comes with a standard manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation included with your purchase or visit the official SODOLA webwebsted.
For technical support, troubleshooting assistance, or any product-related inquiries, please contact SODOLA customer service through their official channels. Information regarding extended protection plans may also be available from your retailer.
