1. Introduktion
This manual provides detailed instructions for the installation, operation, and maintenance of your Steinel L 810 SC Outdoor LED Wall Light. Please read this manual carefully before installation and use to ensure proper function and safety.
The Steinel L 810 SC is an intelligent up- and downlight designed for outdoor use, featuring an invisible 160° iHF motion detector and app control via Bluetooth Mesh technology. It offers energy-efficient lighting with customizable settings for various outdoor areas.
2. Sikkerhedsinstruktioner
- Installationen skal udføres af en kvalificeret elektriker i overensstemmelse med nationale elforskrifter og lokale bygningsreglementer.
- Ensure the power supply is disconnected before installation, maintenance, or repair.
- Produktet må ikke ændres på nogen måde. Uautoriserede ændringer kan ugyldiggøre garantien og udgøre en sikkerhedsrisiko.
- This product is designed for outdoor use. Ensure it is installed in a location protected from direct water jets if not rated for such exposure (check IP rating in specifications).
- Se ikke direkte ind i LED-lyskilden, når den er tændt.
- Hold emballagemateriale væk fra børn.
3. Pakkens indhold
Kontroller, at alle komponenter er til stede, før installationen påbegyndes:
- Steinel L 810 SC Outdoor LED Wall Light
- Mounting material (screws, wall plugs)
- Instruktionsmanual
Figure 3.1: The Steinel L 810 SC Outdoor LED Wall Light.
4. Installation
Følg disse trin for sikker og korrekt installation:
- Forberedelse: Sluk for hovedstrømforsyningen ved afbryderen, før du påbegynder elektrisk arbejde.
- Monteringssted: Choose a suitable outdoor location for the wall light. Consider the desired light coverage and motion detection area.
- Mærkning og boring: Use the mounting plate as a template to mark the drilling points on the wall. Drill holes and insert the provided wall plugs.
- Ledningsføring: Connect the electrical wires (Live, Neutral, Earth) from your mains supply to the corresponding terminals on the light fixture. Ensure secure connections.
- Montering af armaturet: Secure the light fixture to the wall using the provided screws.
- Tænd: Restore power at the circuit breaker. The light should briefly illuminate to indicate successful installation.
Figur 4.1: Eksample of the L 810 SC installed on an exterior wall, providing up and down lighting.
Figure 4.2: The L 810 SC illuminating a house facade at night.
Figure 4.3: The L 810 SC highlighting its Bluetooth Mesh capability and an optional remote switch.
5. Betjeningsvejledning
5.1 Første opsætning og app-forbindelse
The Steinel L 810 SC is controlled via the free STEINEL Connect app. Download the app from your device's app store (Google Play or Apple App Store).
- Open the STEINEL Connect app.
- Follow the on-screen instructions to add your L 810 SC light. The light connects wirelessly via Bluetooth.
- Once connected, you can access all functions and settings through the app.
Figure 5.1: The STEINEL Connect app interface for controlling light settings.
5.2 Key Features and App Functions
- Main and Night Light Dimmable: Adjust the brightness of both the main light and the night light (0-100%) via the app.
- Timer funktion: Set daily and weekly schedules for lighting operation.
- Permanent Light: Option to switch on permanent lighting.
- Belysningsvarighed: Configure the duration the light stays on after detection.
- Tusmørkeindstilling: Adjust the ambient light level at which the sensor activates.
- Precise Detector: The invisible 160° high-frequency sensor is flexibly adjustable on two axes via the app and detects movements up to 5 meters.
- Trådløst netværk: Create groups of lights and network them wirelessly via Bluetooth Mesh without an additional bridge.
- Blød lysstart: The light gradually increases to full brightness for a more pleasant experience.
Figur 5.2: Overview of the light's intelligent features.
Figure 5.3: Illustration of the 160° iHF motion detection area.
Figure 5.4: The iHF sensor's ability to detect motion through certain materials.
Figur 5.5: Eksample of the motion detection coverage around a building.
6. Vedligeholdelse
- Clean the light fixture regularly with a soft, damp klæde. Brug ikke slibende rengøringsmidler eller opløsningsmidler.
- Ensure the sensor lens is kept clean for optimal performance.
- The LED light source is integrated and not user-replaceable. Do not attempt to open the light housing beyond what is necessary for installation.
7. Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Lyset tændes ikke. | No power supply; incorrect wiring; sensor settings too high (twilight). | Check circuit breaker and wiring connections. Adjust twilight setting in the app. |
| Lyset forbliver tændt konstant. | Permanent light function activated; continuous motion in detection area; faulty sensor. | Deactivate permanent light in the app. Check for obstructions or constant movement. Contact support if sensor is faulty. |
| Lyset tændes uden synlig bevægelse. | Sensor sensitivity too high; environmental factors (e.g., strong wind, small animals). | Reduce sensor sensitivity or detection range in the app. Adjust sensor angle if possible. |
| Kan ikke oprette forbindelse til appen. | Bluetooth slukket; lyset er ikke i parringstilstand; app-problem. | Ensure Bluetooth is enabled on your device. Restart the light (power cycle). Reinstall the app if necessary. |
8. Specifikationer
| Feature | Detalje |
|---|---|
| Modelnummer | 087562 |
| Dimensioner (L x B x H) | 23 x 14.6 x 9.1 cm (9.06 x 5.75 x 3.58 tommer) |
| Vægt | 1.04 kg (2.29 lbs) |
| Strømforsyning | 220-240 V / 50-60 Hz |
| Strømforbrug | 9.8 watt |
| Lysstrøm | 679 lm |
| Farvetemperatur | 3000 Kelvin (varm hvid) |
| Bevægelsesdetektor | 160° iHF (High-Frequency) |
| Detektionsområde | Op til 5 meter |
| Materiale | Aluminium, plast |
| Farve | Sølv |
| Særlige funktioner | Dimmable, Motion Sensor, Energy Efficient, App Control, Bluetooth Mesh |
| Certificeringer | CE, RoHS, UKCA |
| Lyskilde Energieffektivitetsklasse | D |
Figure 8.1: Technical dimensions of the L 810 SC.
9. Garanti og support
Steinel products are manufactured to the highest quality standards. For warranty information and customer support, please refer to the official Steinel webwebstedet eller kontakt din lokale forhandler.
Regular software updates for the STEINEL Connect app ensure continuous improvement and new features for your lighting system.
