VEVOR 5-Tier Heavy Duty Storage Shelving Unit

1. Sikkerhedsinstruktioner

Læs og forstå venligst alle instruktioner før montering og brug. Gem denne manual til senere brug.

• Vægt kapacitet: Each shelf has a maximum load capacity of 400 lbs (181.4 kg). The total unit capacity is 2000 lbs (907.2 kg). Do not exceed these limits to prevent structural failure and injury.
• Anti-tipping: Always secure the shelving unit to a wall using the provided anti-tipping brackets to prevent accidental tipping, especially in areas with children or pets.
• Jævn belastningsfordeling: Distribute weight evenly across each shelf. Avoid concentrating heavy items in one area.
• Stabil overflade: Saml og placer enheden på en flad, jævn og stabil overflade.
• Monteringssikkerhed: Wear the provided gloves during assembly to protect hands from sharp edges. Use the rubber hammer for tapping components into place.
• Børns sikkerhed: Lad ikke børn klatre op på eller lege med reolen.

2. Pakkens indhold

Kontroller, at alle nedenstående komponenter er til stede, før monteringen påbegyndes:

• 1 x Storage Shelving Unit (disassembled components)
• 1 x Rubber Hammer
• 16 x gummipuder
• 1 x Par handsker
• 2 x Anti-Tipping Brackets
• 4 x Pole Connection Blocks

Image: All components included in the VEVOR Storage Shelving Unit package.

3. Opsætning og montering

The VEVOR Storage Shelving Unit features a boltless design for easy assembly. A rubber hammer and gloves are included to assist with the process.

1. Forbered komponenter: Unpack all parts and lay them out on a clean, flat surface. Ensure all listed components are present.
2. Assemble Upright Posts: Connect the shorter upright post sections using the pole connection blocks to form the full height upright posts. Tap firmly with the rubber hammer to secure.
3. Attach First Layer Beams: Begin by attaching the short and long beams for the bottom shelf to the upright posts. Ensure the notches align with the keyholes on the posts. Tap firmly with the rubber hammer until secure.
4. Indsæt MDF-plader: Place the MDF board for the bottom shelf onto the assembled beams.
5. Install Subsequent Layers: Repeat the process for the remaining shelves, aligning the beams at your desired height. The adjustable shelf spacing is 1.5 inches (38 mm).
6. Secure Top Beams: Install the top short and long beams to complete the frame.
7. Add Rubber Pads: Place the rubber pads on the bottom of the upright posts to protect your floor.
8. Install Anti-Tipping Brackets: Secure the unit to a wall using the provided anti-tipping brackets and appropriate fasteners for your wall type.

Image: Visual guide for the snap-fit, boltless assembly process.

Image: Illustration of how to adjust shelf height for various items.

4. Betjeningsvejledning

The VEVOR Storage Shelving Unit is designed for versatile use and can be configured in multiple ways to suit your storage needs.

• Justering af hyldehøjde: The shelves can be adjusted in 1.5-inch (38 mm) increments. To adjust, simply remove the MDF board, tap the beams upwards to release them from the keyholes, reposition to the desired height, and tap back into place. Reinsert the MDF board.
• Two-Unit Configuration: The shelving unit can be split into two separate, shorter storage racks. This allows for flexible placement in different areas or for use as workbenches. Ensure rubber pads are applied to all bottom posts in this configuration.

Image: The shelving unit can be configured as a single tall unit or two shorter units.

5. Vedligeholdelse

Proper maintenance will ensure the longevity and appearance of your shelving unit.

• Rensning: Wipe the metal frame and MDF boards with a dry cloth. Avoid using harsh chemicals or abrasive cleaners, as these may damage the powder-coated finish and MDF.
• Inspektion: Periodically check all connections and anti-tipping brackets to ensure they remain secure. Tighten if necessary.
• Rustforebyggelse: The SPCC carbon steel frame features a powder coating for rust and scratch resistance. Avoid prolonged exposure to moisture to maintain this protection.

6. Fejlfinding

Hvis du støder på problemer med din reol, kan du bruge følgende almindelige løsninger:

• Enheden er vaklende: Ensure all beams are fully seated in their respective keyholes. Tap any loose connections with the rubber hammer. Verify the unit is on a level surface and that anti-tipping brackets are securely installed.
• Hyldebrædder passer ikke: Double-check that the beams are correctly installed and that the unit's frame is square. Ensure the correct size MDF board is being used for the corresponding shelf level.
• Besvær med at samle: Review the assembly steps carefully. Ensure components are oriented correctly. A second person can often assist in holding parts steady during initial assembly.

7. Specifikationer

Image: Detailed dimensions and specifications of the VEVOR Storage Shelving Unit.

8. Garanti og support

For technical support, warranty information, or any product-related inquiries, please visit the official VEVOR support webwebsted eller kontakt kundeservice.

VEVOR-support: www.vevor.com/support