RCYAGO Sprinkler Timer Brugermanual

Indledning

The RCYAGO Sprinkler Timer is an advanced, programmable water timer designed for efficient garden and lawn irrigation. Featuring two independent outlets, it allows for precise control over watering schedules, ensuring your plants receive optimal hydration while conserving water. This manual provides comprehensive instructions for installation, operation, and maintenance of your new sprinkler timer.

Nøglefunktioner

• Dual Independent Outlets: Two large outlets, each with a maximum flow rate of 35 liters per minute, allowing separate watering schedules for different zones.
• Fleksibel vandingsvarighed: Set watering times from 1 minute to 5 hours 59 minutes per zone.
• Customizable Cycle Intervals: Program watering cycles every 1 to 7 days, or select specific days of the week (Monday to Sunday).
• Six Independent Programs: Each of the two outlets can be set with up to three distinct watering plans (P1, P2, P3) to meet varied plant needs throughout the day.
• Manuel vandingstilstand: Provides on-demand watering from 0 to 59 minutes, ideal for additional care without disrupting preset schedules.
• Regnforsinkelsesfunktion: Pause watering for 1 to 7 days based on local rainfall, preventing overwatering and saving water.
• Durable and Waterproof Design: IP55 waterproof rating with multiple sealing washers and threaded sealing tape to prevent leaks.
• Nem installation: Features a 360° rotatable interface for quick and simple setup, compatible with 3/4" or 1/2" faucets.
• Brugervenlig skærm: Equipped with a 2.5-inch LCD display and a low battery reminder for convenient operation.

Opsætning og installation

1. Batteriinstallation

The timer requires 4 new AA (1.5V) alkaline batteries (not included). Locate the battery compartment on the back of the unit. Open the cover, insert the batteries according to the polarity markings, and securely close the cover, ensuring the rubber ring is properly seated to maintain waterproofing.

Billede: Bunden view of the sprinkler timer, highlighting the battery compartment for 4 AA batteries and the IP55 waterproof rating, along with a stainless steel filter.

2. Tilslutning til vandhane

The timer is designed for easy connection to standard outdoor faucets. It includes thread reducers for compatibility with both 3/4" and 1/2" sized faucets. Ensure the O-ring is properly seated in the connector before attaching the timer to your faucet. The 360° rotatable interface allows for flexible positioning.

Image: A visual guide demonstrating the fast installation process for the sprinkler timer, showing connections to both 1/2" and 3/4" hose faucets using the O-ring, 360° rotating connector, and 1/2" garden hose male thread fittings.

3. Tilslutning af slanger

Connect your garden hoses to the two independent outlets at the bottom of the timer. Each outlet is compatible with any standard 3/4" or 1/2" garden outdoor hose. Use the provided threaded sealing tape and sealing washers to ensure a leak-proof connection.

Operation

Forståelse af displayet og betjeningselementerne

The timer features a clear 2.5-inch LCD display and intuitive buttons for programming. The display shows current settings, time, and program status. The main buttons include PROGRAM, OK, MANUA, -, +, DELAY, ZONE, and SET.

Image: The RCYAGO Sprinkler Timer showing its main LCD display, control buttons (PROGRAM, OK, MANUA, -, +, DELAY, ZONE, SET), and the two independent outlets.

Setting Watering Programs (P1, P2, P3)

The timer allows you to set up to three independent programs (P1, P2, P3) for each of the two zones. This enables highly customized watering schedules.

1. Vælg zone: Tryk på ZONE button to switch between Zone 1 and Zone 2.
2. Gå ind i programtilstand: Tryk på PROGRAM button to cycle through P1, P2, P3, and Auto/Manual/OFF modes.
3. Indstil starttid: When a program (P1, P2, or P3) is selected, use the + og - buttons to adjust the start time. Press SÆT or OK for at bekræfte.
4. Indstil vandingsvarighed (hvor længe): Adjust the watering duration from 1 minute to 5 hours 59 minutes using the + og - knapper. Trykke SÆT or OK for at bekræfte.
5. Indstil vandingsfrekvens (hvor ofte): Choose the watering frequency (e.g., every 1-7 days or specific days of the week) using the + og - knapper. Trykke SÆT or OK for at bekræfte.
6. Aktivér program: Ensure the timer is set to "Auto" mode for the programs to run automatically.

Image: The sprinkler timer connected to two hoses, illustrating how each zone (Zone 1 and Zone 2) can be independently programmed with three different watering plans (P1, P2, P3) for varied start times and durations.

Image: A visual representation of the automatic watering schedule, showing a calendar for setting cycle intervals (every 1 to 7 days or specific days) and sliders for adjusting start water time, watering duration, and watering frequency.

Manuel vandingstilstand

To initiate manual watering for either zone:

1. Tryk på MANUA knap.
2. Brug + og - buttons to set the desired manual watering duration from 0 to 59 minutes.
3. Trykke OK for at starte manuel vanding.
4. Once the manual watering time ends, the timer will automatically revert to its preset Auto mode.

Regnforsinkelsesfunktion

Sådan sætter du din vandingsplan midlertidigt på pause på grund af regn:

1. Tryk og hold på FORSINKE knap (eller + button for 5 seconds) until the delay option appears on the screen.
2. Brug + og - buttons to select the desired delay duration from 1 to 7 days.
3. Trykke OK to confirm the rain delay. The timer will resume its scheduled programs automatically after the delay period.

Image: The sprinkler timer connected to a faucet, displaying the rain delay function on its screen, indicating that watering can be delayed for up to 1 to 7 days to prevent overwatering.

Opretholdelse

• Udskiftning af batteri: Replace batteries when the low battery indicator appears on the LCD display to ensure continuous operation. Always use new AA alkaline batteries.
• Forebyggelse af lækage: Regularly check the sealing washers and threaded tape at the connections to ensure they are intact and preventing leaks. Replace if worn.
• Filterrensning: The timer is equipped with a stainless steel filter at the inlet. Periodically remove and clean this filter to prevent debris from entering the timer and affecting water flow.
• Vinteropbevaring: In freezing conditions, disconnect the timer from the faucet and store it indoors to prevent damage from ice expansion.

Fejlfinding

• Timeren vander ikke: Check battery level. Ensure the timer is in "Auto" mode and not in "OFF" or "Delay" mode. Verify that the faucet is turned on.
• Ingen vandgennemstrømning: Check for kinks in the hose. Ensure the stainless steel filter is not clogged. Verify water pressure from the faucet.
• Leaks at connections: Ensure all connections are tightened properly. Check that O-rings and sealing washers are correctly seated and not damaged. Apply new threaded sealing tape if necessary.
• Skærmen virker ikke: Udskift batterierne. Sørg for, at batterierne er isat med den rigtige polaritet.

Specifikationer

Garanti og support

For warranty information or technical support, please refer to the product packaging or contact RCYAGO customer service directly. Keep your purchase receipt as proof of purchase.