Bousnic Grå Udskiftningsfjernbetjening til P-Collar 650 Brugermanual

Indledning

This manual provides essential information for the proper use and maintenance of your Bousnic Grey Replacement Remote for P-Collar 650. Please read these instructions carefully before operating the device to ensure safe and effective use.

Produkt overview

Image: The Bousnic Grey Replacement Remote, featuring a digital display showing channel and battery level, along with three control buttons for Tone, Vibration, and Static Correction.

The Bousnic Grey Replacement Remote is designed to control compatible P-Collar 650 receiver collars. It features a clear digital display for channel selection and battery status, along with dedicated buttons for various training modes.

Opsætning og parring

To ensure your remote functions correctly with your receiver collar, follow these pairing steps:

1. Use the switch on the remote to select your preferred channel (e.g., Channel 1 or Channel 2).
2. With the Remote turned on and the Receiver Collar turned off, press and hold the ON/OFF knap on the Receiver Collar for 4-5 seconds.
3. The Red & Green LED on the Receiver Collar will blink for approximately 10 seconds, indicating that it is ready for pairing.
4. While the Receiver Collar's LEDs are blinking, press and hold the Toneknap og Vibrationsknap on the remote simultaneously for 2-3 seconds. The Green LED on the Receiver Collar will blink 5 times, indicating successful pairing.

If pairing is unsuccessful, repeat the steps from the beginning. Ensure both devices are fully charged before attempting to pair.

Betjeningsvejledning

Once paired, the remote allows you to control your P-Collar 650 receiver collar. The remote typically features buttons for:

• Tone knap: Activates an audible tone on the receiver collar.
• Vibrationsknap: Activates a vibration on the receiver collar.
• Static Correction Button: Activates static correction. It is recommended to use tone and vibration modes for training whenever possible.

The digital display shows the selected channel and the remote's battery level. Ensure the remote is within effective range of the receiver collar for proper operation.

Opretholdelse

To ensure the longevity and optimal performance of your Bousnic remote, follow these maintenance guidelines:

• Rensning: Tør fjernbetjeningen af ​​med en blød kludamp klæde. Brug ikke skrappe kemikalier eller slibende rengøringsmidler.
• Opbevaring: Opbevar fjernbetjeningen et køligt, tørt sted væk fra direkte sollys og ekstreme temperaturer.
• Batteripleje: Charge the remote regularly, even if not in frequent use, to maintain battery health. Avoid fully depleting the battery for extended periods.
• Vandeksponering: While the remote may be splash-resistant, avoid submerging it in water.

Fejlfinding

If you encounter issues with your Bousnic remote, consider the following common solutions:

• Fjernbetjeningen reagerer ikke:
  • Check the remote's battery level and charge if necessary.
  • Sørg for, at fjernbetjeningen er tændt.
• Collar Not Responding to Remote:
  • Verify that the receiver collar is turned on and fully charged.
  • Confirm that the remote and collar are paired to the same channel.
  • Re-attempt the pairing process as described in the 'Setup and Pairing' section.
  • Ensure the remote and collar are within effective operating range.
• Kort batterilevetid:
  • Ensure the remote is fully charged before use.
  • Battery life can vary based on usage frequency and intensity.

If problems persist after attempting these solutions, please refer to the support information provided below.

Specifikationer

Garanti og support

For warranty information or technical support, please contact BOUSNIC customer service. Refer to the product packaging or the official BOUSNIC webhjemmeside for de seneste kontaktoplysninger.