VTech CS2051 DECT 2 håndsæt trådløs hjemmetelefon brugermanual

1. Introduktion

This manual provides instructions for the VTech CS2051 DECT 2 Handset Cordless Home Telephone with Answering Machine. It covers setup, operation, maintenance, and troubleshooting to ensure optimal performance of your device. Please read these instructions carefully before using your telephone.

2. Pakkens indhold

Bekræft, at din pakke indeholder følgende varer:

• 1 x Base Unit
• 2 x trådløse håndsæt
• 2 x håndsætopladere
• 2 x AC Adaptors (for base unit and chargers)
• 2 x Battery Packs (AAA batteries required, included)
• 1 x telefonledning
• 1 x Quick Start Guide

Image: The VTech CS2051 system, showing the main base unit with one handset, and a separate charger with the second handset.

3. Opsætning

3.1 Batteriinstallation

1. Åbn batteridækslet på bagsiden af ​​hvert håndsæt.
2. Insert the supplied AAA battery pack, ensuring correct polarity.
3. Luk batterirummets dæksel.
4. Place each handset on its respective charger or the base unit to charge for at least 16 hours before first use.

3.2 Tilslutning af baseenhed

1. Connect one end of the telephone line cord to the LINE port on the base unit.
2. Tilslut den anden ende af telefonledningen til din telefonstikkontakt.
3. Connect the AC adaptor to the POWER port on the base unit.
4. Plug the AC adaptor into a mains power outlet.
5. For the additional charger, connect its AC adaptor to the charger and then to a mains power outlet.

3.3 Registrering af håndsæt

Your handsets are typically pre-registered to the base unit. If a handset displays 'Unregistered' or 'Register Handset', follow these steps:

1. På baseenheden skal du trykke på og holde SIDE button for approximately 5 seconds until the registration indicator light flashes.
2. On the handset, navigate to the 'Registration' menu (refer to the Quick Start Guide for specific menu navigation).
3. Select 'Register Handset' and enter the system PIN (default is usually 0000).
4. The handset will display 'Registering...' and then 'Handset Registered' upon successful completion.

4. Betjeningsvejledning

4.1 Foretage og modtage opkald

• Sådan foretager du et opkald: Tryk på TALE button, then dial the number. Alternatively, dial the number first and then press TALE.
• Sådan modtager du et opkald: Når telefonen ringer, tryk på TALE knap.
• Sådan afslutter du et opkald: Tryk på ENDE button or place the handset back on the base unit/charger.

4.2 Digital Answering Machine

The base unit includes a digital answering machine to record messages when you are unavailable.

• Afspiller beskeder: Tryk på SPIL/STOP button on the base unit. The display will show the number of new messages.
• Sletning af beskeder: During message playback, press the SLET knappen på baseenheden.
• Opsætning: Access the answering machine settings via the handset menu to record your outgoing message or adjust settings.

Image: The base unit of the VTech CS2051, highlighting the digital answering system with a message count display.

4.3 Nuisance Call Blocker

This feature allows you to block unwanted incoming calls.

• Blocking a Number: During or after a call, access the call blocker menu on the handset. You can add numbers to a block list.
• Blocking Unknown Numbers: The system can be configured to block calls from numbers not stored in your phonebook or from withheld numbers.

Image: A VTech CS2051 handset, illustrating the call blocker feature for managing unwanted calls.

4.4 Caller ID and Call Waiting

These features require subscription from your telephone service provider.

• Opkalds-id: The handset display shows the caller's number (and name if stored in your phonebook) before you answer. The phone stores up to 20 incoming call records.
• Opkald venter: If you are on a call and another call comes in, you will hear a tone. You can switch between calls.

Image: A close-up of the VTech CS2051 handset display showing an incoming call number, demonstrating the Caller ID feature.

4.5 Højttalertelefon

The speakerphone function allows for hands-free conversations.

• Sådan aktiveres: Under et opkald skal du trykke på HØJTTALER knap.
• For at deaktivere: Tryk på HØJTTALER button again or lift the handset to your ear.

Image: A VTech CS2051 handset positioned for hands-free use, illustrating the speakerphone capability.

4.6 Samtaleanlæg

You can use the handsets to communicate with each other internally.

• To Initiate: Tryk på INT button on one handset and select the desired handset to call.

4.7 Adjustable Ring Volume and Melody

Customize the ringtone and volume to your preference.

• Access the 'Ringtone Settings' or 'Volume Settings' menu on the handset to choose from available melodies and adjust the ring volume.

Image: A VTech CS2051 handset, highlighting the controls for adjusting ring volume and melody settings.

4.8 Alarm and Mute Function

• Alarm: Set an alarm through the handset menu.
• Stum: Under et opkald skal du trykke på STUM button to temporarily silence your microphone. Press again to unmute.

Image: Illustrates the alarm function (represented by a clock icon) and the mute function (represented by a musical note icon) available on the VTech CS2051.

5. Vedligeholdelse

• Rensning: Wipe the telephone and handsets with a soft, damp klæde. Brug ikke slibende rengøringsmidler eller opløsningsmidler.
• Batteripleje: Ensure handsets are placed on the charger when not in use to maintain battery life. Replace batteries when performance significantly degrades.
• Beliggenhed: Place the base unit in a central location, away from other electrical appliances that may cause interference.

6. Fejlfinding

• Ingen klartone: Ensure the telephone line cord is securely connected to both the base unit and the wall socket. Check if the AC adaptor is properly plugged in.
• Håndsættet oplades ikke: Verify the handset is correctly seated in the charger/base unit. Clean the charging contacts on both the handset and charger with a dry cloth.
• Poor Call Quality/Interference: Move the base unit away from other electronic devices (e.g., Wi-Fi routers, microwaves). Ensure the handset is within range of the base unit.
• Handset Displays 'Unregistered': Follow the handset registration steps in Section 3.3.
• Telefonsvarer optager ikke: Check the answering machine settings via the handset menu to ensure it is enabled and has sufficient recording time.

7. Specifikationer

8. Garanti og support

This VTech CS2051 product is supplied as an Amazon Renewed item. For specific warranty details and support, please refer to the Amazon Renewed program terms and conditions or contact Amazon Renewed customer service directly. VTech provides manufacturing support for its products. For technical assistance or further information, please visit the official VTech support website or consult the full user manual if available from the manufacturer.